DaiMi MZ-1350 User manual

.1 X User Manual
.1 X PS4 controller paddles
Package included
Sleep current: Less than 30uA Working current: Less than 15mA
Electrical parameters
Power supply mode: EXT wired connection Working voltage: DC 3.0-3.3V
Product electrical specifications
1. Long press the SET button for 2 seconds, light flashes quickly.
2. Press the M1 or M2 ( Press once to switch once ) , lights flashing slowly in sequence.
( Flаѕhіng Ѕеquеnсе: →→→→ RЗ → LЗ → R2 → L2 → R1 → L1 )
3. When the target button is flashing, press the SET button, finish setting.
Note: The handle should also have programming and memory programming functions when it
is not connected to Bluetooth state and charging state.
Clear Cache: Long press the SET button for 5 seconds, the LED changes from blinking to off.
Memory Function: Insert the handle again and still retain the last programming function.
The factory default has no definition.
Turbo Function: Press the M1/2 and Turbo at the same time, the function key has Turbo
continuous launch function. Repeat this step to cancel.
Function setting
This product is a PS4 Controller Paddles handle extended button, you can customize the
mapping of the button function on the back, supports turbo continuous shooting function,
plug and play, and bring users a different gaming experience.
Product size
Product introduction
It is composed of 14 digital keys ( , , , , R3, L3, R2, L2, R1, L1, TURBO, SET) .
Key composition
99.5mm/3.92in
57mm/2.25in
44mm/1.73in
PS4 Controller Paddles
MZ-1350
Please read the manual carefully before use and use it in strict accordance with the requirements
of the manual. After reading, please keep it properly for future reference.
English
Need further help, you can contact us by
A. Service E-mail: [email protected]
B. Or contact us on Amazon
1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from list displayed. Select Contact seller.
SUPPORT INFORMATION

.1 X Benutzerhandbuch
.1 X PS4-Controller-Paddel
Im Paket enthalten
Schlafstrom: Weniger als 30uA Arbeitsstrom: Weniger als 15mA
Elektrische Parameter
Stromversorgungsmodus: EXT verkabelte Verbindung Arbeitsspannung: DC 3,0-3,3V
Produkt-Elektrische Spezifikationen
1. Halten Sie die SET-Taste 2 Sekunden lang gedrückt, bis die LED schnell blinkt.
2. Drücken Sie die M1- oder M2-Taste (einmal drücken, um einmal zu wechseln), die LEDs
blinken nacheinander langsam.
( Blinkende Sequenz: →→→→ RЗ → LЗ → R2 → L2 → R1 → L1 )
3. Wenn die Zieltaste blinkt, drücken Sie die SET-Taste, um die Einstellung abzuschließen.
Hinweis: Der Griff sollte auch über Programmier- und Speicherprogrammierungsfunktionen
verfügen, wenn er sich nicht im Bluetooth- oder Ladezustand befindet.
Cache löschen: Halten Sie die SET-Taste 5 Sekunden lang gedrückt, bis die LED vom
Blinken auf aus wechselt.
Speicherfunktion: Stecken Sie den Griff erneut ein und behalten Sie weiterhin die zuletzt
programmierte Funktion bei. Die Werkseinstellung hat keine Definition.
Turbo-Funktion: Drücken Sie gleichzeitig die M1/2- und Turbo-Taste, um die Funktionstaste
mit der Turbo-Dauerfeuer-Funktion zu aktivieren. Wiederholen Sie diesen
Schritt, um die Funktion zu deaktivieren und abzubrechen.
Funktionseinstellung
Dieses Produkt ist ein PS4 Controller Paddles Griff mit erweiterten Tasten und individuell
anpassbarer Funktion. Es unterstützt die TURBO Dauerfeuerfunktion und bietet ein neues
Spielerlebnis.
Produktgröße
Produktvorstellung
Es besteht aus 14 digitalen Tasten ( , , , , R3, L3, R2, L2, R1, L1, TURBO, SET) .
Tastenzusammensetzung
99.5mm/3.92in
57mm/2.25in
44mm/1.73in
PS4-Controller-Paddel
MZ-1350
Bitte lesen und befolgen Sie die Bedienungsanleitung sorgfältig. Bewahren Sie sie für zukünftige
Referenzen auf.
Deutsch
Need further help, you can contact us by
A. Service E-mail: [email protected]
B. Or contact us on Amazon
1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from list displayed. Select Contact seller.
SUPPORT INFORMATION

.1 X Manuel d'utilisation
.1 X PS4 controller paddles
Inclus dans le forfait
Courant de repos : inférieur à 30uA Courant de travail : inférieur à 15mA
Paramètres électriques
Mode d'alimentation : Connexion filaire EXT Tension de fonctionnement : DC 3.0-3.3V
Spécifications électriques du produit
1. Maintenez enfoncé le bouton SET pendant 2 secondes, la lumière clignote rapidement.
2. Appuyez sur le bouton M1 ou M2 (Appuyez une fois pour passer une fois), les lumières
clignotent lentement en séquence.
( Séquence de clignotement: →→→→ RЗ → LЗ → R2 → L2 → R1 → L1 )
3. Lorsque le bouton cible clignote, appuyez sur le bouton SET pour terminer le réglage.
Remarque: La manette doit offrir des fonctions de programmation et de programmation de
mémoire même hors connexion Bluetooth ou en mode de charge.
Effacement du cache: Maintenez enfoncé le bouton SET pendant 5 secondes, la LED
passe du clignotement à l'éteint.
Fonction de mémoire: Insérez à nouveau la manette et conservez toujours la dernière
fonction de programmation. Les réglages par défaut d'usine n'ont
pas de définition.
Fonction Turbo: Appuyez simultanément sur les boutons M1/2 et Turbo, la touche de
fonction a une fonction de lancement Turbo continu. Répétez cette étape
pour annuler.
Réglage des fonctions
Ce produit est une poignée de manettes avec des palettes pour la manette PS4, vous permettant
de personnaliser la fonction de mappage des boutons à l'arrière, prise en charge de la fonction de
tir en rafale TURBO, plug and play, offrant aux utilisateurs une expérience de jeu différente.
Taille du produit
Introduction au produit
Il est composé de 14 touches digitales ( , , , , R3, L3, R2, L2, R1, L1, TURBO, SET) .
Key composition
99.5mm/3.92in
57mm/2.25in
44mm/1.73in
PS4 Controller Paddles
MZ-1350
Veuillez lire attentivement et suivre strictement les instructions du manuel. Conservez-le
soigneusement après lecture pour référence ultérieure.
Français
Need further help, you can contact us by
A. Service E-mail: [email protected]
B. Or contact us on Amazon
1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from list displayed. Select Contact seller.
SUPPORT INFORMATION

.1 X PS4 controller paddles
.1 X PS4 controller paddles
Paquete incluido
Corriente de reposo: inferior a 30uA Corriente de trabajo: inferior a 15mA
PS4 controller paddles
Modalità di alimentazione: Connessione cablata EXT Tensione di lavoro: DC 3.0-3.3V
Especificaciones eléctricas del producto
1. Mantén pulsado el botón SET durante 2 segundos, la luz parpadeará rápidamente.
2. Presiona el botón M1 o M2 (Presiona una vez para cambiar una vez), las luces parpadean
lentamente en secuencia.
( Secuencia de parpadeo: →→→→ RЗ → LЗ → R2 → L2 → R1 → L1 )
3. Cuando el botón objetivo parpadee, presiona SET para completar la configuración.
Nota: El joystick también debe tener funciones de programación y programación de memoria
cuando no está conectado en estado Bluetooth y estado de carga.
Borrar caché: Mantén pulsado el botón SET durante 5 segundos, el LED cambia de
parpadeo a apagado.
Función de memoria: Vuelve a insertar el joystick y mantendrá la última función de
programación. La configuración predeterminada de fábrica no tiene
definición.
Función Turbo: Presiona simultáneamente los botones M1/2 y Turbo, la tecla de función
tendrá la función de lanzamiento continuo Turbo. Repite este paso para
cancelar.
Configuración de funciones
Este producto es un mango de palancas para el controlador de PS4, que permite personalizar la
asignación de función de los botones en la parte trasera, supporto alla funzione di fuoco continuo
TURBO, plug and play, y brinda a los usuarios una experiencia de juego diferente.
Product size
Introducción al producto
Está compuesto por 14 teclas digitales ( , , , , R3, L3, R2, L2, R1, L1, TURBO, SET) .
Key composition
99.5mm/3.92in
57mm/2.25in
44mm/1.73in
PS4 Controller Paddles
MZ-1350
Por favor, leer detenidamente el manual antes de usar y utilizarlo estrictamente de acuerdo con los
requisitos del manual. Después de la lectura, mantenerlo adecuadamente para futuras consultas.
Italiano
Need further help, you can contact us by
A. Service E-mail: [email protected]
B. Or contact us on Amazon
1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from list displayed. Select Contact seller.
SUPPORT INFORMATION

.1 X Manuale utente
.1 X PS4 controller paddles
Pacchetto incluso
Corrente di riposo: inferiore a 30uA Corrente di lavoro: inferiore a 15mA
Parametri elettrici
Modo de suministro de energía: Conexión por cable EXT Voltaje de trabajo: DC 3.0-3.3V
Specifiche elettriche del prodotto
1. Premere a lungo il pulsante SET per 2 secondi, la luce lampeggia rapidamente.
2. Premere il pulsante M1 o M2 (Premere una volta per passare una volta), le luci
lampeggiano lentamente in sequenza.
( Sequenza di lampeggio: →→→→ RЗ → LЗ → R2 → L2 → R1 → L1 )
3. Quando il pulsante desiderato lampeggia, premi SET per completare l'impostazione.
Nota: Il joystick dovrebbe offrire funzioni di programmazione e memorizzazione anche
senza connessione Bluetooth o in modalità di carica.
Cancellazione della cache: Premere a lungo il pulsante SET per 5 secondi, l'LED passa
da lampeggiante a spento.
Funzione di memoria: Reinserire il joystick e mantenere comunque l'ultima funzione di
programmazione. Il valore predefinito di fabbrica non ha una
definizione.
Funzione Turbo: Premendo simultaneamente i pulsanti M1/2 e Turbo, il tasto di funzione
avrà la modalità di lancio continuo Turbo. Ripetere l'operazione per
annullare.
Impostazione delle funzioni
Questo prodotto è un manico con paddle per controller PS4, che consente di personalizzare la
mappatura della funzione del pulsante sul retro, Soporte de la función de disparo continuo
TURBO, plug and play e offre agli utenti un'esperienza di gioco diversa.
Tamaño del producto
Introduzione al prodotto
È composto da 14 tasti digitali ( , , , , R3, L3, R2, L2, R1, L1, TURBO, SET) .
Key composition
99.5mm/3.92in
57mm/2.25in
44mm/1.73in
PS4 Controller Paddles
MZ-1350
Prima dell'uso, leggere attentamente il manuale e utilizzarlo conformemente alle indicazioni riportate.
Dopo la lettura, conservarlo accuratamente per futuri riferimenti.
Español
Need further help, you can contact us by
A. Service E-mail: [email protected]
B. Or contact us on Amazon
1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from list displayed. Select Contact seller.
SUPPORT INFORMATION

1. 长按SET键2秒， 对应的LED灯快闪。
2.按下M1或M2（按下一次可切换一次），LED灯会在相应功能顺序慢闪。
（亮灯顺序为： → → → →RЗ→LЗ→R2→L2→R1→L1）
3. 按一下SET键，则相应功能映射到M1/2上，完成设置。
注意：手柄在未连接蓝牙状态和充电状态时，也具有编程和记忆编程功能。
取消功能：长按SET键5秒，编程LED灯由快闪变为熄灭，则M1/2功能清除 ，此时按键无编程功能。
编程记忆功能：再次插入手柄，M1/2保留上次编程功能，则相应LED灯长亮。出厂默认无编程功能。
Turbo键功能：同时按住M1/2和Turbo键，则该功能键有Turbo连发功能。重复此步骤则取消该功能。
UK REP
GOAL REACH CONSULTING LTD
OFFICE 1029 3 HARDMAN STREET 10TH FLOOR, SPINNINGFIELDS
MANCHESTER, UK M3 3HF
We simply act as UK representative for cross-border sellers, and are not manufacturers/importers/
distributors for the product, nor involved in the manufacture/import/sale of the product.
Therefore, we are not responsible for any after-sales services related to the product. ln case of any
product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.
OST UK 20230424000006 [email protected]
EU REP
SUCCESS COURIER SL
CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA , OFICINA 3,
Fuenlabrada, Madrid, 28947 Spain
We simply act as EU representative for cross-border sellers, and are not manufacturers/importers/
distributors for the product, nor involved in the manufacture/import/sale of the product.
Therefore, we are not responsible for any after-sales services related to the product. ln case of any
product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.
OST_EU_20230424000022 [email protected]
Need further help, you can contact us by
A. Service E-mail: [email protected]
B. Or contact us on Amazon
1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from list displayed. Select Contact seller.
SUPPORT INFORMATION
.1 X 说明书
.1 X PS4 手柄扩展背键
包装清单
休眠电流: ＜30uA 工作电流: ＜15mA
电气参数
供电方式：EXT有线连接 工作电压：DC3.0-3.3V
电性规格
操作说明
该产品是一款PS4 Controller Paddles手柄扩展背键，您可以自定义背面按键功能的映射，支持
TURBO连发功能，即插即用，为用户带来不一样的游戏体验。
产品尺寸
产品介绍
它由14个数字键组成 ( , , , , R3, L3, R2, L2, R1, L1, TURBO, SET) .
按键组成
99.5mm/3.92in
57mm/2.25in
44mm/1.73in
PS4 手柄扩展背键
MZ-1350
使用前请仔细阅读本手册，并严格按照手册要求使用。阅读后请妥善保管，以备将来参考
中文