DALLAS SOFA COMPANY Houston User manual

Power Reclining Sofa
Houston, Galveston, Port Arthur
POWER SUPPLY ASSEMBLY INSTRUCTIONS
Page: 1/6

IMPORTANT SAFETY INSTRUCTIONS:
• Read all instructions carefully before unpacking assembly parts.
• Use only vendor supplied materials to assemble. Using unauthorized
materials could jeopardize the intergrity of the item.
• Keep instructions for future use.
• Intended for residential use only.
• Keep small parts out of the reach of children.
Page: 2/7
TABLE OF CONTENTS
Parts List
Assembly Instructions
Warnings
Page 3
Pages 4–6
Page 7

Page: 3/7
Thank you for your purchase. When unpacking, the power supply &
connector is located in a white fabric bag in the back of the lower seat
cushion. Please be sure to check all packing materials carefully.
PARTS LIST
PART PICTURE PART DESCRIPTION QTY
A Y SPLIT POWER CONNECTOR 1
B POWER SUPPLY 1

Page: 4/7
STEPS
Step 1: Un-velcro the outside back along the bottom rear of the base frame
to find power supply bag and point of connection.
Remember: When unpacking, the power supply & connector is located in
a white fabric bag in the back of the lower seat cushion. Please be sure to
check all packing materials carefully.

STEPS
Step 2: Connect each end of the Y split power connector (A) to the recliners
on either side of the sofa.
Step 3: Connect power supply (B) to connector (A).
Step 4: Finally, connect the power supply plug (B) to a power source.
Page: 5/7
B
B
A
A

STEPS
Step 5: Re-attach the outside back along the bottom rear of the base frame
with the velcro.
Page: 6/7

WARNINGS
Dispose of packing material properly.
Do not use plastic cover as head covering as it may cause suocation.
Do not use this product as a stepladder.
Use this product for intended purpose only.
Intended for residential use only.
Page: 7/7