Dametric GIR-DM1 Operating and installation instructions

Dametric AB GIR-DM1 GMS Industrial Router
GIR-DM1 EN.docx Sept. 14, 2015 / BL Page 1 of 7
GIR-DM1
GMS Industrial 4G Router
Description
dametric

Dametric AB GIR-DM1 GMS Industrial Router
GIR-DM1 EN.docx Sept. 14, 2015 / BL Page 2 of 7
Table of contents Page
1 GENERAL ........................................................................................................................ 2
2 TECHNICAL DATA .......................................................................................................... 3
3 DISPLAY AND CONTROL ELEMENTS ........................................................................... 4
3.1 Meaning of the display elements ........................................................................... 4
3.2 Function of the control elements ............................................................................ 5
4 CONNECTIONS ............................................................................................................... 5
4.1 Front panel connections ........................................................................................ 5
4.2 Terminal connections on the top ............................................................................ 6
5 MOUNTING ...................................................................................................................... 6
6 SIM CARD ........................................................................................................................ 7
7 CONFIGURATION ........................................................................................................... 7
7.1 LAN settings .......................................................................................................... 7
7.2 Internet router ........................................................................................................ 7
8 VALMET ARTICLE NUMBER .......................................................................................... 7
9 CONNECTION ................................................................................................................. 7
10 CONTACT ........................................................................................................................ 7
1 General
The GIR-DM1 is an industrial 4G router and the unit is used in RMS/GMS systems for remote access
functions.
The one and only task for the remote access
system is for Dametric to supply support and
service to the AGS system end user. Files
including logs, alarms and settings can easily
be retrieved by Dametric during normal
working times. Urgent 24/7 backup is also
possible but this option has to be discussed
and negotiated.
A SIM-card for the local 4G (or 3G) network
is provided and paid by the end customer.
A couple of analogue signals is exchanged
between the AGS system and the customer
DCS. These signals are used for the logger
functions.
The specific signals has to be determined for
each installation.

Dametric AB GIR-DM1 GMS Industrial Router
GIR-DM1 EN.docx Sept. 14, 2015 / BL Page 3 of 7
2 Technical data
Mobile Communikation
Networks 2G/GPRS/EDGE: 900/1.800 MHz; CSD, GPRS/EDGE class 12
3G/UMTS/HSPA: 900, 1.800, 2.100 MHz; UMTS, HSDPA, HSUPA
4G/LTE*: 800, 900, 1.800, 2.100, 2.600 MHz; LTE
Antenna 2 SMA connections, MIMO as an option (downlink)
SIM 1 slot for Mini-SIM card
Router
Function Connection management, DHCP server and client, full NAT (port forwarding,
netmapping), DNS relay, dynDNS support, SNMP, NTP client and server, buffered
real-time clock
Security OpenVPN (client and server), IPsec, PPTP, MAC firewall, 10 user for dial-in,
authentication over PAP/CHAP/MS-CHAP/MS-CHAP 2, dial filter for dial-out,
linkloss detection, failed login detection, GRE
Redundancy 2 dial-out targets, 2 OpenVPN server targets
LAN
Ports 2 x RJ45 (switch)
Operating mode 10/100 MBit/s for full/half duplex
Function Automatic recognition patch/crossover cable, automatic speed adjustment;
MDI/MDI-X
Messages Hardware watchdog, system messages via e-mail, SMS and SNMP traps,
SNMP V1/V2c/V3
Additional features Update firmware and configuration (local and remote), daily auto update
Electrical features
Power supply recommended +24 V DC (± 20%), allowed 10...48 V DC
Power consumption approx. 2 W (logged in), max. 5 W (during connection)
Physical features
Size in mm Length = 110,width = 45, height = 70
Operating temperature -30...+ 60 °C>
-30...+ 75 °C under limited conditions (refer to under www.insys-icom.com/restricted)
Humidity 0...95% (non condensing).
Mounting DIN-rail on the back side

Dametric AB GIR-DM1 GMS Industrial Router
GIR-DM1 EN.docx Sept. 14, 2015 / BL Page 4 of 7
3 Display and control elements
Figure 1: Display and control elements on the front of the device
3.1 Meaning of the display elements
LED Colour Function off flashing blinking on
Link
LAN 1/2 green 10/100 MBit/s
10
MBit/s 100 MBit/s
Activity
LAN 1/2 orange Activity not conn. Data traf-fic connected
Power green Supply missing present
COM green WWAN link offline establishing
orange WWAN link established
Signal green SIM card no signal or
logged out
WWAN
data
traffic
Field
strength
(see
Table 2)
Status
green VPN
VPN connec-tion
estab-lished
red Status Initialization, FW
update, fault
Table 1: Meaning of display elements
Blinking interval LED signal Quality Signal quality
900 ms on, 100 ms off 20 .. 31 very good
200 ms on, 200 ms off 13 .. 19 good
100 ms on, 900 ms off 0 .. 12 poor
off 99 (not detectable) insufficient
Table 2: Blinking code of the data/signal LED
Pos Description
1 Reset key
2 SIM card slot
3 Power LED
4 COM LED
5 Signal LED
6 Status LED
7 Activity LED for LAN 2
8 Link LED for LAN 2
9 Activity LED for LAN 1
10 Link LED for LAN 1

Dametric AB GIR-DM1 GMS Industrial Router
GIR-DM1 EN.docx Sept. 14, 2015 / BL Page 5 of 7
3.2 Function of the control elements
Description Operation Meaning
Reset key
Press once for a short time. Resets the software and restarts it.
(Soft reset)
Press at least 3 seconds. Resets the hardware and restarts
it. (Hard reset)
Press three times for a short time
within 2 seconds.
Deletes all settings and resets the
device to the factory defaults.
SIM card slot Press on SIM card for a short
time
Ejects the SIM card.
Table 3: Description of the functions and meaning of the control elements.
4 Connections
4.1 Front panel connections
Use this socket for the GIR Antenna
Ethernet cable to the switch
Figure 2: Connections on the front panel of the device
Position Description
1 Ethernet port LAN 1 (RJ45, 10/100 BT)
Connect this port to the GMS-SW1 unit.
2 Ethernet port LAN 2 (RJ45, 10/100 BT)
This port is normally not used.
3 Cellular antenna connection (SMA socket), main antenna.
Connect the GIR antenna to this socket.
4 Cellular antenna connection (SMA socket), additional antenna for 2x2 MIMO
(downlink). Normally not used.
Table 7: Description of the connections on the front panel of the device
The screen of the antenna system must be connected to the protective conductor when using an outside
mounted antenna.

Dametric AB GIR-DM1 GMS Industrial Router
GIR-DM1 EN.docx Sept. 14, 2015 / BL Page 6 of 7
4.2 Terminal connections on the top
Figure 3: Connections on the top of the device
Terminal Designation Description
1 10 ... 48 VDC Power supply 10 V – 48 V DC
2 GND Ground
3 Reset Reset input
Table 8: Description of the connections on the top of the device
The reset input must be connected to ground (GND) to reset the device. The functionality is identical to the
reset key
5 Mounting
Position the device at the DIN rail. There are two snap-in hooks at
the upper and lower edge of the DIN rail groove. Hook the upper
one into place behind the upper edge of the DIN rail.
Lift the device perpendicular to the DIN rail until the two lower,
flexible snap-in hooks engage in the DIN rail.

Dametric AB GIR-DM1 GMS Industrial Router
GIR-DM1 EN.docx Sept. 14, 2015 / BL Page 7 of 7
6 SIM Card
The system requires a Mini-SIM card and a 3G/4G internet connection agreement
with a local operator. An unlimited data volume is preferable but if a limit is
necessary, we suggest a minimum of 2GByte per month. This volume includes
continuous logging.
The Mini-SIM card is mounted in the dedicated slot on top of the unit.
7 Configuration
7.1 LAN settings
The unit has to be configured for the chosen installation. This is done by Dametric at delivery and the IP-
address is specified on the label on the left side of the unit. The standard IP-address used is 192.169.11.50
(mask = 255.255.252.0).
7.2 Internet router
The unit has to be configured for the used SIM card settings.
Pin Enter the given pin from the Internet provider
User name dametric
Password service
Access Port Name Enter name from provider.
8 Valmet article number
VAL0366871.
9 Connection
K1/1 +24VDC Power supply (K1/1 is the leftmost terminal)
K1/2 0VDC GND.
Lan 1 Ethernet Connect to the switch.
Antenna Connect to the lower antenna socket.
SIM SIM card Insert the SIM card into the slot.
Note. Turn off the power to the unit prior to insertion/removal.
10 Contact
Development, production and service:
Dametric AB
Jägerhorns Väg 19, SE-141 75 Kungens Kurva, Sweden
Phone: [phone] Telefax: [phone]
e-mail: [email protected] www.dametric.se
dametric