Danfoss living connect User manual

Danfoss Heating Solutions VIIDH102 11/2013
1
Installation and User Guide
living connect®
Electronic Radiator Thermostat

2
11/2013 VIIDH102 Danfoss Heating Solutions
Installation Guide
1. Installation
1.1 Identify your living connect® thermostat............................................. 4
1.2 In the package ..................................................................... 4
1.3 Overview of valve adapters ......................................................... 5
1.4 Installing the right adapter ......................................................... 6
1.5 Inserting the batteries.............................................................. 7
1.6 Using the buttons .................................................................. 7
1.7 Installing living connect® ............................................................ 8
1.8 Automatic adjustments............................................................. 8
1.9 Removing living connect® ........................................................... 9
1.10 Resetting living connect® to default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.11 Removing an adapter from living connect® ......................................... 10
2. Technical specications................................................................. 11
Pay a visit to the living web-site, where you nd a lot of additional information:
animations and videos, a FAQ section, literature and much, much more
living.danfoss.eu
Scan this QR code with your smartphone and go directly
to the living connect® Installation video on YouTube.
Installation Guide living connect®

3
Danfoss Heating Solutions VIIDH102 11/2013
User Guide living connect®
User Guide
3. Overview of display and control buttons ............................................... 12
4. Connecting living connect® to a Danfoss Link™ system
4.1 Conguring rooms in Danfoss Link™ CC ............................................ 12
4.2 Connecting living connect® to Danfoss Link™ CC .................................... 12
4.3 Testing the connection ............................................................ 14
5. Additional settings
5.1 Adjustments for over/undersized radiators......................................... 14
5.2 Open-window function............................................................ 15
5.3 Automatic valve exercising ........................................................ 15
6. Safety precautions...................................................................... 15
7. Disposal ................................................................................ 15

4
11/2013 VIIDH102 Danfoss Heating Solutions
1. Installation
1.1 Identify your living connect® thermostat
LIVING CONNECT
INTELLIGENT RADIATOR THERMOSTAT
DANFOSS RA CONNECTION5702420110257
014G0001
living connect®comes in several versions to meet the demands of
dierent markets.
You identify your version by the code number on the box label.
Adapters for a range of dierent valves types are available as acces-
sories, see chapter 1.3.
Code no. Version characteristics Quick guide languages
014G0001 Incl. pre-mounted RA adapter UK, DE, DK, NL, FR, PL, SE, FI
014G0002 Incl. RA + M30 x 1.5 adapters UK, DE, DK, NL, FR, PL, SE, FI
014G0003 Incl. RA + M30 x 1.5 adapters UK, CZ, SK, RU, TR, HU, HR, SI
1.2 In the package
living connect® 014G0001 is supplied with a pre-mounted adapter for Danfoss RA valves, two
alkaline AA batteries, a 2 mm Allen key and a Quick Guide in languages English, German, Danish,
Dutch, French, Polish, Swedish and Finnish.
living eco®
Quick Start Guide
MAKING MODERN LIVING POSSIBLE
Danfoss Heating Solutions
living connect® sensor Alkaline AA batteries Allen key, 2 mm Quick Guide and “Hanger”
living connect® 014G0002 and 014G0003 are supplied with adapters for Danfoss RA valves and
valves with M30 x 1.5 (K) connections, two alkaline AA batteries, a 2 mm Allen key and a Quick
Guide in English, German, Danish, Dutch, French, Polish, Swedish and Finnish (014G0002) or in
English, Czech, Slovak, Russian, Turkish, Hungarian Croatian and Slovenian (014G0003).
living eco®
Quick Start Guide
MAKING MODERN LIVING POSSIBLE
Danfoss Heating Solutions
living connect®
sensor
Adapter for
RA valves
Adapter for
M30 x 1.5 (K) valves
Alkaline
AA batteries Allen key, 2 mm Quick Guide and “Hanger”
Installation Guide living connect®

5
Danfoss Heating Solutions VIIDH102 11/2013
1.3 Overview of valve adapters
Adapters for a wide range of dierent valve types are available as accessories.
Adapter type Code no. Adapter Valve
For Danfoss
RA valves 014G0251
For M30 x 1.5 (K)
valves 014G0252
For Danfoss
RAV valves
014G0250
34
For Danfoss
RAVL valves
26
For Danfoss
RTD valves 014G0253
For M28 valves:
- MMA 014G0255
- Herz 014G0256
- Orkli 014G0257
- COMAP 014G0258
Installation Guide living connect®

6
11/2013 VIIDH102 Danfoss Heating Solutions
1.4 Installing the right adapter
Adapter for RA valves (pre-mounted on 014G0001)
1. 2.
Place the RA adapter on the valve as shown. Tighten the adapter with the 2 mm Allen key.
Adapter for M30 x 1.5 (K) valves
1. 2.
Place the K adapter on the valve as shown. Hand-tighten the K adapter (max. 5 Nm).
Adapter for RAV valves (accessory)
1. 2.
Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).
Adapter for RAVL valves (accessory)
1. 2.
Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).
Installation Guide living connect®

7
Danfoss Heating Solutions VIIDH102 11/2013
Adapter for RTD valves (accessory)
1. 2.
Place the RTD adapter on the valve as shown. Hand-tighten the RTD adapter (max. 5 Nm).
Adapters for M28 valves (accessories)
Please follow the instructions supplied with the valve adapter for the specific M28 valve.
1.5 Inserting the batteries
Remove the battery cover and insert two AA batteries. Make sure the
batteries are correctly oriented.
Rechargeable batteries must not be used.
When replacing batteries the programme settings will be preserved,
but after two minutes the settings for time and date are reset.
The low battery symbol is displayed approx. one month before the
batteries run out.
After approx. two weeks the symbol will ash 14 times from 19:00
to 21:00 hrs.
Before the batteries run out living connect®will leave the valve in a
slightly open position to protect the valve from damage.
1.6 Using the buttons
living connect®has two arrow buttons which allow you to navigate
the display and the menus and to set the temperature*.
The dot button is used to select and conrm.
If the display is o, press either button to activate the display.
*The temperature is usually controlled via Danfoss Link™ CC, but may be
changed at any time using the thermostat’s buttons. If this is done, the
thermostat sends a message to Danfoss Link™ CC, instructing it to synchro-
nise the other thermostats in the same room.
Installation Guide living connect®

8
11/2013 VIIDH102 Danfoss Heating Solutions
1.7 Installing living connect®
1. 2.
living connect®must be in Installation Mode
to be xed correctly onto the valve. This is
indicated by a large, ashing Min the display.
Installation Mode can be selected by pressing
for 3 seconds until Mis displayed, then
release and press again.
Screw living connect®onto the adapter and
tighten by hand (max. 5 Nm).
While slightly pressing forward, turn living
connect®clockwise untill it locks, then tighten.
3. 4.
Press to fix living connect®. Icons for Network Connection and Alarm are
flashing, indicating living connect® is ready for
connection with Danfoss Link™ CC.
1.8 Automatic adjustments
During the rst night of operation living connect® will shut o the radiator heat and then open
again to detect the exact opening point of the valve. This will allow living connect® to control the
heat as eciently as possible. If necessary, the procedure is repeated once a night for up to a week.
You might experience the valve being warm during the adjustment procedure, regardless of the
room temperature.
Intelligent Control (Forecast)
During the first week of operation living connect®learns when it is necessary to start heating the
room in order to reach the correct temperature at the correct time.
The intelligent control will continuously adjust the heating time compared to seasonal tempera-
ture changes.
Using Saving Program requires that your heating system has enough heat for a short period during
heat up. If your experience problems you should contact your installer.
Installation Guide living connect®

9
Danfoss Heating Solutions VIIDH102 11/2013
1.9 Removing living connect®
1. 2.
Activate Installation Mode: Press for 3
seconds to select the Function Menu.
Select Mwith . When Mflashes, press .
A large Mis flashing in the display to indicate
that Installation Mode is activated.
3. 4.
Remove the battery cover and the batteries. Insert the Allen key or similar into the hole to
lock the adapter ring. Turn counterclockwise
to unscrew living connect®from the adapter.
1.10 Resetting living connect® to default settings
1. 2.
Remove the battery cover and take out one
battery.
Press and hold for approx. 5 seconds, while
reinserting the battery.
Installation Guide living connect®

10
11/2013 VIIDH102 Danfoss Heating Solutions
1.11 Removing an adapter from living connect®
1. 2.
Remove the battery cover. Insert a small hex key or similar into the locking
hole to lock the adapter ring.
3. 4.
With the hex key locking the adapter ring,
turn the adapter in the shown direction.
Put back the battery cover. Mount living con-
nect® on another valve adapter according to
the instructions supplied with the adapter.
Installation Guide living connect®