Daniela DAN45ACM User manual

Appliance User Manual
45CM FULL AUTOMATIC BUILT IN
COFFEE MACHINE
DAN45ACM
danielaappliances.com.au

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 2
Daniela Appliances started in 1988. Formally known as Italnova,
the company began operating by selling other major leading brands.
Since then, Daniela Appliances has it’s own range, continuously
evolving, striving on delivering leading-edge quality products at
very competitive prices.
From an Italian heritage our brand Daniela was then established in
2005 from a father’s love to a daughter and naming it after Daniela, now
the new proprietor. Daniela has worked closely with her father for many
years learning from his decades of industry experience. Daniela with her
extensive knowledge and understanding of appliances, now continues
her father’s legacy with a modern flare.
Our products are extensively tested and come with ISO certification
certificates prior to importation. Daniela Appliances continuously
designs and sources the best parts, to bring you an elegant feel that will
last the test of time and for a third of the cost from a major brand.
Daniela Appliances is dedicated to oering our customers exceptional
products with exceptional service. Our commitment is to provide our
valuable customers the very best in technology with the very best in
safety that combines both the values that brings us market success.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 3
DAN45ACM
45CM FULL AUTOMATIC BUILT IN
COFFEE MACHINE

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 4
IMPORTANT SAFETY & CARE INSTRUCTIONS
DANGER!!
This is an electrical appliance and may cause electric shock.
You should therefore respect the following safety warnings:
• Never touch the appliance with damp hands or feet.
• Never touch the plug with damp hands.
• Make sure the socket used is freely accessible at all times, enabling the appliance to be
unplugged when necessary.
• To disconnect the appliance completely, place the main switch (at the right side of the
appliance) in the 0 position.
• If the appliance is faulty do not attempt to repair. Turn it o using the main switch
(A5) unplug from the mains socket and contact customer services.
• If the plug or powder cable is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
IMPORTANT
Keep all packaging (plastic bags, polystyrene foam) away from children.
SAVE THIS INSTRUCTION IN A SAFE PLACE FOR FUTURE REFERENCE
Thank you for choosing Daniela appliances!
Please read all instructions before using this appliance. This book contains valuable
information about operation, care and service. Keep it in a safe place for future
reference. Should the appliance be sold or transferred to another owner, or should
you move house and leave the appliance, always ensure that the book is supplied
with the appliance in order that new owner can be acquainted with the functioning of
the appliance and relevant warnings.
The manufacturer cannot be held responsible for any inaccuracies due to printing or
transcription errors that may be found in this handbook.
N.B.: the pictures shown in the figures in this handbook are purely indicative.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 5
IMPORTANT
• The appliance is designed and produced for domestic use only.
• The appliance is not intended for use by person (including children) with reduced
physical sensory or mental capabilities or lack of experience and knowledge unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children must be supervised to ensure they do not play with the appliance.
• Do not immerse this machine in water
• Do not grasp the coee maker when it is out of the cabinet.
• Do not rest recipients containing liquids or inflammable or corrosive materials on
top of the appliance.
• Place the accessories required to prepare the coee (the measure for example)
in the special holder.
• Do not rest large objects which could obstruct movement or unstable objects
on the appliance.
IMPORTANT
• Never make drinks, hot water or steam when the appliance is extracted.
• Always make sure the appliance is inactive before extracting it.
• Failure to observe this precaution could lead to damage to the appliance.
• The only exception is adjusting the coee mill which must be done with the machine out
(see the section “Adjusting the coee mill”).
DANGER OF BURNS!!
This appliance produces hot water and steam may form while it is in operation.
Avoid contact with splashes of water or hot steam. Avoid touching hot surfaces
when the appliance is in use.
NOTE
Use original or manufacturer recommended accessories and spare parts only.
DESIGNATED USE
• This appliance is designed and made to prepare coee and heat drinks.
All other use is considered improper.
• This appliance is not suitable for commercial use.
• The manufacturer is not liable for damage deriving from improper use of the appliance.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 6
NOTE
THIS APPLIANCE CAN BE INSTALLED IN COMBINATION WITH A BUILT-IN OVEN IF THE
LATTER IS FITTED WITH A COOLING FAN AT THE REAR (MAXIMUM OVEN POWER: 3 KW).
• FAILURE TO DESCALE AND CLEAN THE APPLIANCE VOIDS ALL WARRANTIES.
• FAILURE TO FOLLOW THE GUIDELINES AND INSTRUCTION SET BELOW
VOIDS ALL WARRANTIES.
• BUG INFESTATIONS WITHIN THE MACHINE VOID ALL WARRANTIES.
• FAILURE TO USE THIS COFFEE MACHINE FOR ANYTHING ELSE OTHER THAN WHAT IT
WAS INTENDED FOR VOIDS ALL WARRANTIES.
• FOREIGN OBJECTS STUCK IN GRINDER ARE NOT COVERED UNDER WARRANTY.
PRELIMINARY CHECKS
After removing the packaging, make sure the product is complete and undamaged
and that all accessories are present. Do not use the appliance if it is visibly damaged.
Contact Customer Services.
INSTALLING THE APPLIANCE
When installing the appliance. respect the following safety warnings:
• Installation must be performed by a qualified professional in compliance with legislation
in force in the country of installation (see Built-in installation).
• The packing elements (plastic bags. polystyrene foam, etc.) should be kept out of reach
of children as they are a Safety hazard.
• Do not install the appliance in rooms where the temperature may drop to 0°C or lower
(the water in the appliance could freeze and cause damage).
• You should set the water hardness as soon as possible following the instructions
in the “SETTING WATER HARDNESS” chapter.
CONNECTING THE APPLIANCE
DANGER!
• Check that the mains power supply voltage corresponds to the value indicated on the
appliance rating plate.
• Connect the appliance to an eciently earthed and correctly installed socket with a
minimum current rating of 10A only.
• If the power socket does not match the plug the appliance, have the socket replaced
with a suitable type by a qualified professional.
• To comply with safety directives, a rock switch with a minimum contact distance
of 3mm must be installed.
• Do not use multiple sockets or extensions.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 7
IMPORTANT
Safety cut out devices must be included in the mains power supply in compliance with the
installation regulations in the country concerned.
• If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. lf it does
not fit your socket, the plug should be cut o from the mains lead, and an appropriate
plug fitted, as below.
WARNING
Very carefully dispose of the cut o plug after removing the fuse: do not insert in a 13 Amp
socket elsewhere in the house as this could cause a shock hazard. With alternative plugs not
incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on
type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved
fuse to as 1362. In the event of losing the fuse cover, the plug must NOT be used until a
replacement fuse cover can be obtained from your nearest electrical dealer. The colour of the
correct replacement fuse cover is that as marked on the base of the plug.
• If your appliance’s not fitted with a plug, please follow the instructions provided below:
WARNING!!
This appliance must be earthed.
The wires in the mains lead are coloured in accordance with the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
If the colour of the wires in the mains do not correspond with the coloured markings identifying
the terminals in your plug. Proceed as follows:
• The green and yellow wire must be connected to the terminal in the plug marked with the
letter E or the earth symbol or coloured green or green and yellow.
• The blue wire must be connected to the terminal marked with the letter “N”
or coloured black.
• The brown wire must be connected to the terminal marked with the letter “L”
or coloured red.
AUTOMATIC CUP TRAY LIGHT WARNING
When the appliance is on, the lights (near coee spout) automatically illuminate the spout and
cup tray.
Important! Do not look at the lights directly or using an optical instrument.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 8
BUILT IN INSTALLATION
Verify the minimum measure required for correct installation of the appliance.
The coee maker must be installed in a column and the column must be firmly fixed to the wall
with commercially available brackets
IMPORTANT
• All installation or maintenance operations must be performed with the appliance
disconnected from the mains electricity supply.
• Kitchen furniture in direct contact with the appliance must be heat resistant (<65ºC).
• To guarantee correct ventilation, leave a gap at the bottom of the cabinet (see
measurements in figure).
Check the cabinet size fits, as per this picture, before install.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 9
Step 2: Fix with the screws. If using button
install method.
Step 4: Put coee machine in the guide.
Step 1: Install guide connect bracket –
fix with the screws if using side install method.
Step 3: Fully extract this guide to the outside.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 10
Step 5: Extract this machine to the outside.
Open the coee bean cover at add coee
beans in container.
Step 7:
• Take out the tank and fill it with fresh
water, then insert in original position.
• Put this machine to back into the
Built-in cabinet and connect to the power.
Turn on main switch (A5) you can use
this machine.
• If the coee maker is installed over a
warmer drawer (500W max.), use the
top surface of this as a reference to
position the rails.
• Fix the power cable with the clip to
avoid it tangling when the appliance is
inserted or extracted.
• The power cable must be long enough
to allow the appliance to be extracted
from the cabinet to fill the coee beans
container.
• The appliance must be earthed in
compliance with legislation.
• Electrical connections must be
performed by a qualified electrician
in compliance with the manufacturer’s
instructions and legislation in force in the
country of installation.
Install 2 screws in each side.
Step 6: Open the tank cover on left side A11.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 11
USING THE APPLIANCE FOR THE FIRST TIME
• All machines are tested at time of manufacture; therefore, it is completely normal
for there to be traces of coee in the mill.
• Water hardness should be set as soon as possible following the instructions in the
“Setting water hardness” chapter.
• Connect the appliance to the mains electricity supply and turn on the main switch (A5).
Press on/o button to turn on this machine.
• The machine will display “self-check”, and next display “heating”
…… Wait for some time, this machine will automatic start “rinsing” ….
• When rinse program ends, this machine will display “ready”.
• When this machine reaches this point, that mean your machine is ready for use
IMPORTANT!!!
• NEVER USE FREEZE DRIED OR INSTANT COFFEE
This could damage the brewing unit or machine.
• NEVER USE FLAVOURED OR CARAMALISED COFFEE BEANS
This could damage the grinder.
• NEVER USE COCOA OR HOT CHOCOLATE POWDER DOWN
THE PRE-GROUND COFFEE SHUTE
This can damage the brewing unit or machine.
• NOT FOR COMMERCIAL USE
For normal home use only.
• NEVER INSERT COCOA, HOT CHOCOLATE POWDER, FREEZE DRIED COFFEE POWDER,
CHAI LATTE POWDER ETC INTO THE PRE-GROUND COOFFEE SHUTE -
THE PRE-GROUND COFFEE SHUTE IS ONLY FOR PRE-GROUND COFFEE BEAN USE
This will most definitely damage your machine and void all warranties.
USER INSTRUCTIONS
Read these instructions carefully before using the appliance.
• Save these instructions. If the appliance is passed to other people, they must also be
provided with these instructions.
• Failure to follow these instructions may result in burns or damage to yourself
or the appliance.
• The manufacturer is not liable for damage deriving from failure to respect these instructions.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 12
DESCRIPTION
OF THE APPLIANCE
A1. Display screen
A2. Milk frothing unit
A3. Frothing nozzle
A4. Coee nozzle
A5. Main switch
A6. Adjustable mill knob
A7. Coee grounds container
A8. Load tray
A9. Drip tray
A10. Metal drip tray
A11. Tank
A12. Coee bean container.
A13. Coee bean cover
A14.Pre-ground coee funnel
DESCRIPTION OF THE
CONTROL PANEL
There are 8 buttons on the panel.
This is indicated in brackets
in the description.
B1. on/o
B2. Cappuccino
B3. latte
B4. espresso
B5. coee
B6. “+” button
B7. “-” button
B8. Pause/enter

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 13
ACCESSING YOUR MENU
After the appliance displays “ready” select “menu” or select “display” we can use the internal
menu to modify the following parameters and functions:
• Time
• Unit on
• Unit o
• Water hardness
• Cups statistics
• Language
SETTING YOUR COFFEE MACHINE
1. When the appliance displays “ready”,you can select the function button you require.
2. Press “coee” key, then this machine will start working--- coee beans will grind, followed by
the running of the brewing system, the coee will then extract….
3. If required you can adjust output coee volume by pressing press “+” key or “-” key, touch
once, which will increase or reduce 5 ml coee accordingly.
4. Aroma and Temperature, must be changed the setting before make coee.
• How to change the aroma? ...when machine displays “ready”
• Press B8 button, machine will display “use powder”, press “+” key or “-” key, select
“aroma” menu, Press B8 button, you can select...Mild, Normal or Strong.
• Press “+” key or “-” key until display you want to set, then Press B8 button to finish the
aroma setting, next select “exit” to come back to “ready” state….
5. How to change these temperatures? ---same operation as aroma First select “menu”,
• Press B8 button to enter next select “temperature”. You can choose “Normal” or “High”.
• Press B8 button finish the temperature setting.
NOTE
• If the coee is delivered a drop at a time or not at all. Turn the grinding adjustment knob
(A6) one click clockwise (see “Adjusting the coee mill”). Proceed one click at a time until
coee delivery is satisfactory.
• If the coee is delivered too fast and the crema is not satisfactory, turn the grinding
adjustment knob (A6) one click anticlockwise (see “Adjusting the coee mill”).

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 14
SETTING THE WATER HARDNESS
The harder the water is, the more frequently your DANIELA coee machine will require descaling.
Purchase a special strip then deep fully in the water for a few seconds, remove and wait about 30
seconds, until it changes colour and forms red squares, according the colour gauge you can
Read out the water hardness level.
You can set the water hardness level according to the strip value.
SETTING THE TIME
To set the time, proceed as follows:
1. When in “ready” state, Press the B8 button, select the “display”.
2. Press the B8 button to enter next select----CC/OZ then select time.
3. Press “+” key or “+” key let LCD display “time”, press B8 and LCD may display “--/--” hours
number flash.
4. Next press “+” key or “+” key until the unit displays the hour you require.
5. Press B8 that once you have the hour you require.
6. Next the LCD will display “**/-- “--- and the minute side of the time will flash.
7. Press “+” key or “+” key until it displays the minutes you require.
8. Press “enter” key to complete setting the minutes.
ADJUSTING YOUR PRE-SET COFFEE (ml)
If you wish to change the pre-set ml for your coee---- CC/OZ.
1. When in “ready” state, Press the B8 button, select the “display”.
2. Press the B8 button to enter next select ----CC/OZ then select CC.
3. Follow the prompts until you have selected the amount of ml/cc you require.
4. Press enter to save your selection.
USING FOR FIRST TIME
All machines are tested in the factory therefore its completely normal for there to be traces
of coee in the mill.
• You should set water hardness as soon as possible following the instructions in the
“Setting water hardness” chapter.
• Connect the appliance to the mains electricity supply and turn on the main switch (A5).
• Press on/o button to turn on this machine.
• Fill the water tank to the “max” line.
• Fill the beans compartment with good quality beans. Avoid flavoured, caramelized beans,
as they may damage your grinder.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 15
• The machine display “self-check”, and next display “heating” …
• Wait for some time, this machine will automatic start “rinsing” ...
• When rinse program ends, this machine will display “ready”.
• When this machine reaches this state, that means the machine is ready for use. You can
now make coee, espresso, cappuccino, and even re-program the to suit your own cups.
• Before making your first drinking coee, we suggest making approx. 10-15 throw away
coees. This flushes out the system and clears the machine of impurities.
MAKING COFFEE
1. When the appliance displays “ready”, you can select function button.
2. Press “coee” key, the machine will then start working. Grind coee bean, followed by the
brewing. The coee will extract from the 2 spouts at the front of the machine.
3. You can also adjust your coee volume by pressing the “+” key or “-” key, each single touch
will increase or reduce 5ml of coee.
4. You can also change Aroma (Strength) and temperature if required, but you must
5. Change the setting before making the coee.
6. How to change the aroma (Strength)?
a. When machine display “ready”, press B8 button, the machine will display “use powder”,
press “+” key or “-” key, select “aroma” on the menu, Press B8 button.
b. You can now select mild, normal or strong, press “+” key or “-” key until reach your
selection, then Press B8 button to finish the aroma setting,
c. Next select “exit” to come back to “ready” state….
7. How to change the temperature?
a. First select “menu”, Press B8 button to enter
b. Next select “temperature”. You can choose “normal” or “high”.
c. Then Press B8 button finish the temperature setting.
NOTE 1:
If the coee is delivered a drop at a time or not at all. Turn the grinding adjustment knob (A6)
one click clockwise (see ‘Adjusting the coee mill”). Proceed one click at a time until coee
delivery is satisfactory.
NOTE 2:
If the coee is delivered too fast and the crema is not satisfactory, turn the grinding adjustment
knob (A6) one click anticlockwise (see “Adjusting the coee mill”).

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 16
NOTE 3:
Tips for a hotter coee:
• When you turn the appliance on, if you want to make a short coee (less than 60cc/ml),
rinse the cups with hot water to preheat the cups.
• If more than 2-3 minutes have passed since the last coee made, before requesting another
coee, you must preheat the infuser.
• Deliver the water into the underlying drip tray or alternatively use this water to fill
(and then empty) the cup to be used for the coee, so as to preheat it.
• Unless preheated, do not use excessively thick cups as they will absorb too much heat.
• Preheat the cups by rinsing them with hot water.
NOTE 4:
When the appliance displays “fill water”, fill the tank with water or the appliance will not deliver
coee. (It is normal for there to be a little water left in the tank when the message is displayed).
NOTE 5:
After about 15 times coees. The appliance displays ‘EMPTY GROUND “, indicating that the
ground container is full and must be emptied and cleaned. Until the ground container has been
cleaned. The appliance continues to display the message and coee cannot be made.
• To clean, extract the drip tray (A9), empty and clean.
• When cleaning, always extract the drip tray completely to avoid it falling when the ground
container is removed.
• Empty the ground container and clean thoroughly to remove all residues left on the bottom.
NOTE 6:
When the appliance displays “empty tray”, indicating that drip tray is full of waste water, this
means you must extract the drip tray and pull all water and clean it and come back to original
position then this machine goes back to “ready” state.
IMPORTANT!
When removing the drip tray, the ground container must be emptied, even if it is not completely
full. If this is not done, when you make the next coee, the ground container may fill up more than
expected and clog the machine.
NOTE 7:
Never extract the water tank while the machine is delivering coee.
If it is removed, it will not be possible to make the coee and the appliance will display
“fill water”. Put the water tank in original position, the interrupt program will go on to finish.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 17
ADJUSTING THE COFFEE MILL
The coee mill is pre-set in the factory to make coee correctly and should not require adjusting
initially. However, if after making the first few coees you find that delivery is either too fast or too
slow (a drop at a time), this can be corrected by adjusting the grinding adjustment knob (A6).
IMPORTANT!
The grinding adjustment knob (A6) must only be turned when the coee mill is in operation.
For slower delivery and creamier coee, turn one click anticlockwise (finer, pre-ground coee).
For faster delivery (not a drop at a time), turn one click clockwise (coarser pre-ground coee).
It will take a minimum of 2 coees once adjustments to the grinder are made to see if the
changes are satisfactory. If not continue the process until the end result is satisfactory.
IMPORTANT!
It is extremely important to use high quality coee beans in the grinder, as inferior beans may
have foreign objects which could get stuck in the grinder. Foreign objects stuck in the grinder are
not covered under the manufacturer’s warranty.
USING PRE-GROUND COFFEE BEANS
1. When the appliance displays ‘READY’.
• Press B8 button until the machine displays “use powder”.
• Then again Press B8 button machine display “fill powder”.
• Open the coee powder cap, use the spoon to fill coee powder,
next to select cappuccino latte espresso coee.
• Once coee choice has been selected, e.g. espresso, Press B8 button the machine
will automatically make your coee.
2. You can also adjust output coee volume following the above steps
3. You can also change these set: temperature following the above steps
4. You can also use coee powder to make cappuccino latte coee,
by selecting dierent functions
NOTE 1:
Never introduce pre-ground coee when the machine is o or before pressing the button to
avoid the coee spreading through the inside of the appliance.
NOTE 2:
Never add more than 1 level measure, otherwise the appliance will not make the coee and
the pre-ground coee will be dispersed inside the appliance, dirtying it. Or the coee will be
delivered a drop at a time.
NOTE 3:
Use the measure provided to add the right amount of coee.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 18
NOTE 4:
Introduce only pre-ground coee for espresso coee machines into the funnel. Never fill with
coee beans, freeze dried coee or other substance that could damage the appliance.
NOTE 5:
If more than one measure of pre-ground coee is used and the funnel clogs, push the coee
down with a knife then remove and clean the infuser and machine as described in the
“Cleaning the infuser chapter”.
TIPS FOR A HOTTER COFFEE
• When you turn the appliance on, if you want to make a short coee (less than 60ml),
it is advisable to pre-heat your cup with hot water.
• If more than 2-3 minutes have passed since the last coee made, before requesting
another coee, you must preheat the infuser. Deliver the water into the underlying drip tray
or alternatively use this water to fill (and then empty) the cup to be used for the coee,
so as to preheat it.
• Unless preheated, do not use excessively thick cups as they will absorb too much heat.
• Preheat the cups by rinsing them or filling them with hot water for 1-2 minutes before use.
NOTE
When the appliance displays “fill water”, fill the tank with water or the appliance will not deliver
coee. (It is normal for there to be a little water left in the tank when the message is displayed).
• After approximately 15 coees, the appliance will display “EMPTY GROUNDS“, indicating
that the ground container is full and must be emptied and cleaned.
• Until the ground container has been cleaned. The appliance continues to display the
message and coee cannot be made.
• To clean, extract the drip tray (A9), empty and clean.
• When cleaning, always extract the drip tray completely to avoid it falling when the ground
container is removed.
• Empty the ground container and clean thoroughly to remove all residues left on the bottom.
NOTE
When the appliance displays “empty tray“, this is indicating that drip tray is full of waste water.
To clean the drip tray must be extracted and the water needs to be emptied from it, remember to
give the drip tray a quick clean before placing back into its original position. Once the tray is re-
inserted the machine will go back into its “ready” state.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 19
IMPORTANT!
When removing the drip tray, the ground container must be emptied, even if it is not completely
full. If this is not done, when you make the next coee, the ground container may fill up more than
expected and clog the machine.
• Never extract the water tank while the machine is delivering coee.
• If it is removed, it will not be possible to make the coee and the appliance will display
“fill water”. Put the water tank in original position, the interrupt program will go on to finish.
ADJUSTING THE COFFEE MILL (GRINDER)
The coee mill is factory pre-set and should not require adjusting initially. However, if after
making the first few coees you find that delivery is either too fast or too slow (a drop at a time),
this can be corrected by adjusting the grinding adjustment knob (A6).
IMPORTANT!
The grinding adjustment knob (A6) must only be turned when the coee mill is in operation.
For slower delivery and creamier coee, turn one click anticlockwise (finer, pre-ground coee).
For faster delivery (not a drop at a time), turn one click clockwise (coarser pre-ground coee).
Coee has been used to factory test the appliance and it is therefore completely normal for there
to be traces of coee in the mill.
MAKING ESPRESSO WITH PRE-GROUND COFFEE
• When the appliance displays “READY”. Press B8 button and select “use powder”.
• Then again, Press B8 button machine display “fill powder”. Open the coee powder cap,
use a spoon to fill coee powder, next to select cappuccino latte espresso coee.
*For example, if “espresso” key is selected, Press B8 button the machine will
automatic to make “espresso”.
PRE-GROUND COFFEE TIPS
• Never introduce pre-ground coee when the machine is o or before pressing the button,
to avoid the coee spreading through the inside of the appliance.
• Never add more than 1 level measure, otherwise the appliance will not make the coee and
the pre-ground coee will be dispersed inside the appliance, dirtying it, or the coee will be
delivered a drop at a time.
• Use Only the measure provided to add the right amount of coee.
• Introduce only pre-ground coee for espresso coee machines into the funnel.
• Never fill with coee beans, freeze dried coee, hot chocolate powder, cocoa, chai latte
powder or other substances that could damage the appliance.
• If more than one measure of pre-ground coee is used and the funnel clogs, push the coee
down with a knife then remove and clean the infuser and machine as described in the
“Cleaning the Brewing Unit chapter”.

P I 02 9604 1226 E I [email protected] W | danielaappliances.com.au
PAGE 20
FROTHING MILK/STEAM AUTOMATICALLY
Pour some milk directly into a cup as per the diagram, or alternatively insert the hose directly into
your bottle of milk.
Then select the automatic coee you require from the control panel
(see above description for assistance).
The steam function can also be used to froth milk manually utilising either a mug or frothing jug.
1. Ready yourself with either milk in a mug or in a frothing jug.
2. Turn the frothing nozzle knob to the right into frothing position.
3. When the machine in “ready” state, press B8 button once, then select
“use powder”, “hot milk”, “hot cream”
4. Select “hot cream” press B8 button then machine display “steam heating”,
after steam heating has ready the machine will spray steam.
5. Place the silicone pipe deep in milk to begin frothing. Angle your mug/jug slightly enough
that the milk creates a vortex like swirl whilst frothing.
6. To increase or decrease the pre-set time for frothing manually, press “+” or “-” key this will
increase or reduce your frothing time by 1 second each touch.
7. Once frothing is completed “press rinse” will display on the screen.
8. Press B8 button, the machine will automatically start cleaning the frothing nozzle,
after this program is complete, the machine will go back to “ready” state.