Dante DLV1123A User manual

DLV1123
1/3” High Resolution
520TVL D/N Camera
Installation and Operations Manual
Model Number: DLV1123A NTSC
DLV1123B AL
Description: High Resolution 520TVL Day/Night
Camera w/Low Light Illumination

1. PRECAUTION
Do not open or modify
Do not adjust or modify the camera's internal circuits or power supply modules,
as it may cause damage to the unit. For internal settings and repairs, consult factory.
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside the camera
that may cause damage to the unit . If water or liquid get inside the camera,
disconnect the power cable immediately. e careful to protect the camera from
direct exposure to weather, rain, etc.
e careful when handling the unit
Do not drop the camera or subject it to strong shock or vibration.
Install away from electric or magnetic fields
It may interfere with or distort the image when install close to an electric or magnetic fields,
ex: TV, Speaker, etc.
Protect from humidity , dust and high temperature
Do not install it where there is greasy smoke or steam, where the moisture may get too high
or where is a lot of dust.
Do not install close to stove, or other heat generating devices, such as spotlights, etc.
Avoid places where there is direct sunlinght.
Cleaning
Do not directly touch the CCD element. If necessary, use a soft cloth mositened with
alcohol to wipe off any dust.

2. INSTALLATION
AUTO IRIS LENS
1. Remove the protective cap from the camera's lens mount.
2. Carefully align the CS/C lens into the camera lens mount and turn clockwise
slowly until it firmly attached.
3. Insert the cable Plug into the lens terminal socket located behind of the camera body.
4. For IRIS connector details see the following table.
IRIS JACK DC LENS
1 DRIVE +
2 DRIVE -
3 DAMP +
4 DAMP -
MANUAL IRIS LENS
1. Remove the protective cap from the camera's lens mount.
2.
Carefully align the CS/C lens into the camera lens mount and turn clockwise
slowly until it is firmly attached.
POWER SUPPLY
1. efore turning on the power to the camera, ensure that the lens is fitted with
the camera to avoid damage to the exposed CCD chipset.
2. Connect camera to 12VDC power supply.
CONNECTION
1. Connect the video outputs of the camera to the video inputs of a monitor or DVR.
2. Connect power supply to the power input on the camera then turn on the power.
3. Adjust the lens and camera's setting to get the best image.

3.
MAJOR CONTROL KEYS FUNCTION
①
:
AES / AI: Auto Electronic Shutter / Auto RIS
②
:
C/M: Colour / Monochrome
③
:
LC: ack Light Control
④
:
MIR: H-Mirror
⑤
:
Video output end
⑥
:
Power input end
⑦
:
Power indicator light
⑧
:
Auto Iris socket
⑨
:
Lens Iris level