DAPAudio PSS-10 User manual

PSS-10
ORDERCODE D2604

Congratulations!
You have bought a great, innovative product from DAP Audio.
The DAP Audio brings excitement to any venue. Whether you want simple plug-&-play action or a
sophisticated show, this product provides the effect you need.
You can rely on DAP Audio, for more excellent audio products.
We design and manufacture professional audio equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]
You can get some of the best quality, best priced products on the market from DAP Audio.
So next time, turn to DAP Audio for more great audio equipment.
Always get the best -- with DAP Audio !
Thank you!

1
2
2
2
3
4
4
5
5
6
9
10
11
12
12
12
13
13
13
13
13
13
13
13
13
14
14
14
14
14
14
15
16
19
20
20
20
21
Dap Audio
Dap Audio PSS-10™ Product Guide
Warning.........................................................................................................................................................................
Unpacking Instructions...........................................................................................................................................
Safety-instructions...................................................................................................................................................
Operating Determinations.....................................................................................................................................
Return Procedure....................................................................................................................................................
Claims.......................................................................................................................................................................
Description....................................................................................................................................................................
Overview.................................................................................................................................................................
CD-player................................................................................................................................................................
Mixer.........................................................................................................................................................................
Wireless Microphone..............................................................................................................................................
Remote Control......................................................................................................................................................
Installation....................................................................................................................................................................
Set Up and Operation.................................................................................................................................................
Operating on AC power.......................................................................................................................................
Operating on battery power................................................................................................................................
Charging the PSS-10 built in batteries..................................................................................................................
Changing the batteries of the PSS-10..................................................................................................................
CD-Operations.............................................................................................................................................................
Loading a CD.........................................................................................................................................................
Unloading CD’s.......................................................................................................................................................
CD’s/ MP3-discs/ USB sticks/ SD- MMC cards......................................................................................................
Selecting Tracks......................................................................................................................................................
Starting Playback ..................................................................................................................................................
Stop Playback.........................................................................................................................................................
Pausing....................................................................................................................................................................
Operating of the wireless microphones...................................................................................................................
Inserting/changing the battery............................................................................................................................
Tips for achieving maximum performance.........................................................................................................
Before switching off the power..................................................................................................................................
Approval........................................................................................................................................................................
Declaration of conformity...........................................................................................................................................
Connection Cables………..………………………………………………………………………..….…..……...................
Maintenance...............................................................................................................................................................
Replacing a fuse.........................................................................................................................................................
Troubleshooting...........................................................................................................................................................
Product Specifications................................................................................................................................................

2
WARNING
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• DAP PSS-10
• 2x Wireless Microphone
• 2x Antenna
• Remote control
• IEC cable (175cm)
• User manual
WARNING
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this system has to:
-be qualified
-follow the instructions of this manual
Before you initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to
warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
CAUTION!
Keep this system away from rain and moisture!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!

3
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the system.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never leave any cables lying around.
Do not insert objects into air vents or bassreflex ports.
Do not connect this system to a dimmerpack.
Do not switch the system on and off in short intervals, as this would reduce the system’s life.
Do not open the device and do not modify the device.
Do not drive the inputs with a signal level bigger, than required to drive the equipment to full
output.
Only use system indoor, avoid contact with water or other liquids.
Avoid flames and do not put close to flammable liquids or gases.
Always disconnect power from the mains, when system is not used. Only handle the power-cord
by the plug. Never pull out the plug by tugging the power-cord.
Always operate the unit with the AC ground wire connected to the electrical system ground.
Make sure you don’t use the wrong kind of cables or defective cables.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the system and the power-
cord from time to time.
Please turn off the power switch, when changing the power cord or signal cable, or select the
input mode switch.
Extreme frequency boosts in connection with a high input signal level may lead to overdriving
your equipment. Should this occur, it is necessary to reduce the input signal level by using the
input control.
Avoid ground loops! Always be sure to connect the power amps and the mixing console to the
same electrical circuit to ensure the same phase!
If system is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your system. Leave
the system switched off until it has reached room temperature.
If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Dap Audio dealer for
service.
Repairs, servicing and electric connection must be carried out by a qualified technician.
For replacement use fuses of same type and rating only.
WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
This system is not designed for permanent operation. Consistent operation breaks will ensure that the
system will serve you for a long time without defects.
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !

4
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

5
Description of the device
Features
•Portable sound system with CD player and two wireless microphones
•Built in self- charging battery pack
• Output power maximum 25 Wrms
• Built in Tuner/CD/USB/SD- player
•2 Wireless microphones included
Overview
Fig. 1
1. Tuner/CD-player
2. Microphone A/B receivers
3. Powered Mixer

6
CD-player
Fig. 2
1) Mute Button
Use this button to mute the output.
2) Mode Button
This button lets you select Radio, aux, CD, USB, SD as a source for payback. You can’t select the CD,
USB or SD slot if there is no media (CD, USB stick or SD card) inserted.
3) P-EQ Button
Pressing the PEQ button gives you direct access to the P-EQ function. Pressing the button lets you
select between four EQ presets or bypass the DSP circuit.
ROCK: Gives you a frequency response optimized for rock music.
POP: Gives you a frequency response optimized for pop music.
CLAS: Gives you a frequency response optimized for classical music.
FLAT: Gives you a flat frequency response.
4) APS Button
Pressing and holding this button starts APS. If APS is activated, the radio will scan the FM band for
stations and automatically store them in memory. If you decide to exit APS before the search is
finished, press the APS button again.
5) F.Skip Button
In CD/MP-3 mode: Press this button to skip to the next track.
In Radio mode: While searching for a station manually. The frequency will increase each time you
press the button. Pressing and holding the button for more than 1 second starts a forward auto
search. In auto search, the tuner will search the frequency band until a station of sufficient strength is
found.
6) LCD Display
7) Release Button
Releases the front panel to get access to the CD-slot.
8) USB Slot
Use this slot to connect your USB stick for MP-3 playback.
9) B.Skip Button
In CD/MP-3 mode: Press this button to skip to the previous track.
In Radio mode: While searching for a station manually. The frequency will decrease each time you
press the button. Pressing and holding the button for more than 1 second starts a downward auto
search. In auto search, the tuner will search the frequency band until a station of sufficient strength is
found.

7
10) Band Button
Use this button to select the desired band. Pressing the button several times let’s you select one of
five bands as shown below.
11) Power Button
Use the power button to turn the device on or off.
12) Volume/Select Control
Press the control to select between the volume, bass, treble, fader or balance functions as shown
below.
VOL: Turn the control to increase or decrease the volume.
BAS: Turn the control to increase or decrease the bass frequencies.
TRE: Turn the control to increase or decrease the treble frequencies.
BAL: This function has no effect in the PSS-08.
FAD: This function has no effect in the PSS-08.
Pressing and holding the control for 2 seconds enables you to toggle the loudness function on or off.
The loudness function gives you a fatter sound on low signal levels.
13) Clock button
Pressing the clock button once, shows the clock. Press again and the hours display will blink, using the
Volume/Select Control (12) allows you to adjust the hours. Pressing the clock button repeately let’s
you do the same for the minutes and seconds and finaly let’s you return to the normal display as
shown in the figure below.
As soon as you switch the Power switch (42) in off (0) position, the clock will lose it’s settings.
14) 1/PAU buton
In Radio mode you can use this button to browse through the memory presets.
In CD/MP-3 mode you can use this button to start/pause playback.
15) 2/INT Button
In CD/MP-3 mode, pressing this button will start the intro mode. In intro mode, the device
only plays the first seconds of the content of the CD, USB-stick or SD-card.
In Radio mode, pressing this button will select preset 2.
16) 3/RPT Button
In CD MP-3 mode, pressing this button allows you to repeat the current track. Exit the repeat
mode by pressing the button again.
When in Radio mode, pressing this button will select preset 3.
17) 4/RDM button
In Radio mode you can use this button to browse through the memory presets.
In CD/MP-3 mode you can use this button to toggle random play on or off.
18) 5/-10 button
This button allows you to decrease parameter values (e.g. Volume, bass etc). It has the same effect
as turning the Select Control to the left.
19) 6/+10 button
This button allows you to decrease parameter values (e.g. Volume, bass etc). It has the same effect
as turning the Select Control to the left.
20) IR receive window
This sensor receives the information of the remote control. Don’t place any object or sticker in front of
the sensor.
21) SD/MMC-card Slot
Use this slot to connect your SD/MMC-card for MP-3 playback.

8
Fig. 3
22) CD-slot
23) Eject Button
Press this button to eject the CD.
24) Reset Button
Press this button in case you need to reset the unit.
Wireless Mic Receiver
Fig. 4
25)Channel A Antenna connector
26)Channel A Audio level indicator
Indicates the level of the incoming audio signal.
27)Channel A RF indicator
Lights if the carrierwave of the wireless microhone is received.
28)Channel A Volume control.
Used to adjust the output level of channel A.
29) Channel B Volume control.
Used to adjust the output level of channel B.
30)Channel B RF indicator
Lights if the carrierwave of the wireless microhone is received.
31)Channel B Audio level indicator
Indicates the level of the incoming audio signal.
32)Channel B Antenna connector

9
Mixer
Fig. 5
33) Mic 1 level
Use this control to adjust the volume of the Mic 1 input (49).
34) Mic 2 level
Use this control to adjust the volume of the Mic 2 input (50).
35) Mic 3 level
Use this control to adjust the volume of the Mic 3 input (51).
36) High
Use this control to adjust the High frequencies.
37) Low
Use this control to adjust the Bass frequencies.
38) Echo level
Use this control to adjust the level of the built in echo effect.
39) CD/ Tun. level
Use this control to adjust the level of the built in Car Radio.
40) AUX level
Use this control to adjust the level of the Aux (41) input.
41) AUX input Stereo Unbalanced RCA
Stereo Line level input.
42) Power ON/ OFF/ CHARGE switch
Position I is on, position II is charge, in between position is off.
43) Power LED
Lights green if the device is powered on.Lights orange if the batteries run low (in case of battery
Power).
44) Charge LED
Blinks if the built in battery is being charged. Light continuously if the battery is 100% charged.
45) AC Inlet with integrated fuse holder.
This connector is meant for the connection of the supplied main cord. Connect one end of the
power cord to the connector, the other end to the mains, then switch the Power (42) in positon I for
operating the unit on AC power.
Note: Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains. Replace the fuse only with a fuse of same specification (250V:T1,6A).

10
46) 115V/230V Selector
Before plugging the PSS-10 into a wall socket, make sure that the 115V/230V Selector is set to the
proper voltage.
47) REC output
Stereo RCA line level output
48) Line Output
¼” mono unbalanced line level jack output
49) MIC 1
¼” unbalanced microphone jack input.
50) MIC 2
¼” unbalanced microphone jack input.
51) MIC 3
Combo balanced/unbalanced microphone input.
Wireless Microphone
Fig. 6
52) Microphone On LED
The red LED will light up shortly if the microphone is turned on.
53) Power On switch
Use this switch to turn the microphone On or Off.
54) Battery compartment
Access the battery compartment by removing the cover.

11
Remote control
Fig. 6
55) PWR Button
Use the power button to turn the radio/CD player on or off.
56) 1/►ΙΙ Button
In CD/MP-3 mode you can use this button to start/pause playback.
In Radio mode, pressing this button will select preset 1.
57) MOD Button
This button lets you select Radio, aux, CD, USB, SD as a source for payback. You can’t select the CD,
USB or SD slot if there is no media (CD, USB stick or SD card) inserted.
58) 2/INT Button
In CD/MP-3 mode, pressing this button will start the intro mode. In intro mode, the device
only plays the first seconds of the content of the CD, USB-stick or SD-card.
In Radio mode, pressing this button will select preset 2.
59) MUTE Button
Use this button to mute the output.
60) 3/RPT Button
In CD MP-3 mode, pressing this button allows you to repeat the current track. Exit the repeat
mode by pressing the button again.
When in Radio mode, pressing this button will select preset 3.
61) 5/-10 Button
In CD/MP-3 mode, pressing this button will skip 10 tracks backwards.
When in Radio mode, pressing this button will select preset 5.
62) 6/+10 Button
In CD/MP-3 mode, pressing this button will skip 10 tracks forwards.
When in Radio mode, pressing this button will select preset 6.
64) 4/RDN Button
In CD MP-3 mode, pressing this button will start the random mode. In random mode, the device plays
the content of the CD, USB-stick or SD-card in random order.
When in Radio mode, pressing this button will select preset 4.
65) ►Button
In CD/MP-3 mode: Press this button to skip to the next track. Press and hold this button to play the
track fast forward.
In Radio mode: While searching for a station manually, the frequency will increase each time you
press the button. Pressing and holding the button for more than 1 second starts an upwards auto
search. In auto search, the tuner will search the frequency band until a station of sufficient strength is
found.
66) ENTER/SEL Button
Pressing this button allows you to select a parameter. The select button on the remote control has the
same function as pressing the select control on the Radio/CD player.

12
67) ◄Button
In CD/MP-3 mode: Press this button to skip to the beginning of the track. Press and hold this button to
play the track fast backwards.
In Radio mode: While searching for a station manually. The frequency will decrease each time you
press the button. Pressing and holding the button for more than 1 second starts a downward auto
search. In auto search, the tuner will search the frequency band until a station with sufficient strength
is found.
68) VOL+/Menu Button
This button allows you to increase parameter values (e.g. Volume, bass etc). It has the same effect as
turning the Select Control to the right.
69) VOL-/Menu Button
This button allows you to decrease parameter values (e.g. Volume, bass etc). It has the same effect
as turning the Select Control to the left.
70) ST/MO Button
Press this button to switch between Mono or Stereo mode. Functional only in radio mode.
71) LOUD Button
Press this button and use the + and –buttons to switch the loudness function on or off. The loudness
increases the bass and treble frequencies and is very useful at low volume levels to give you a fatter
sound.
72) LOC/DX Button
Press this button and use the + and –buttons to select Local mode. In Local mode, the tuner will only
store the strongest (local) stations in memory. Works only in radio mode.
73) SCAN Button
While in radio mode, pressing this button will show all preset radio stations.
74) ID3/Band Button
Use this button to select the desired band. Pressing the button several times let’s you select one of
five bands as shown below.
75) APS/SEARCH Button
Pressing and holding this button for more than 3 seconds starts ASM. If ASM activated, the PSS-10 will
scan the FM band for stations and automatically store them in memory. If you decide to exit ASM
before the search is finished, press the ASM button again.
Installation
Remove all packing materials from the CD Player. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. The power supply is printed on the back of the device.
Do not attempt to operate an 115V specification product on 230V power, or vice versa.
Connections
1. Turn off the Power switch.
2. Connect the PSS-10 to your other devices you plan on using.
CAUTION: Be sure that the power is off, when connecting the cables.
Operating on AC power
• Make sure the Power (35) switch is in Off (middle) position and connect the power cable.
• Switch the Power (35) switch in position I to run the PSS-10. The Power (36) LED will light green.

13
Operating on battery power
• Do not connect the power cable.
• Switch the Power (35)switch in position I to run the PSS-10.
• Switch the Power (35)switch in position 0 if you’re pausing, to save your batteries.
• If the batteries are fully charged, the PSS-10 can run on battery power for approximately 5 hours,
depending on the volume level.
• If the batteries run low, the unit switches off.
Charging the PSS-10built in batteries
• Make sure the Power (35) switch is in Off (middle) position and connect the power cable.
• Switch the Power (35) switch in position II to charge the PSS-10’s internal batteries.
• While the PSS-10 is charching, the red Charge (37) LED blinks.
• Charge the batteries for at least 8 hours. If the batteries are fully charged, the red Charge (37) LED lights
up continuously.
Changing the batteries of the PSS-08
• The PSS-10 has three built in batteries which can be accessed through the metal battery cover at the
side of the PSS-10. The batteries can be charged aprox. 500 times if used properly.
• Normally when fully charged, the PSS-10 can run for about 5 hours depending on the output volume.
If the batteries run low very fast, despite being fully charged (at least 8 hours), the batteries ran old and
we advise you to change them.
• Make sure that you connect the batteries correctly. This means red wire for + and the black wire for –
and fasten the cover with the screws again.
CD/MP-3 Operations
1. Loading a CD
• Press the Release (7) button to open the front panel.
• Hold the disc by the edges and push it gently in the Disc slot (22). The Disc will now be loaded
automatically.
2. Unloading CD’s
• Press the Release (7) button to open the front panel.
• Press the Eject (22) button. The playback will stop and the disc will be ejected.
• If the movement of the disc stops, take the disc by the edges and remove it completely from the slot.
Caution:
• Do not place any foreign objects in the disc slot and do not try to place more than one disc in the disc
slot at a time.
•Do not push the disc in manually when the power is off, as this may result in malfunction and damages
the player.
3. CD’s/ MP3-discs/ USB sticks/ SD- MMC cards
MP3 is an audio compression mode using level 3 of the international MPEG standard, whereby the sound
signal is compressed at the ratio of 12:1. An MP3 disc can record music for playback over 600 minutes or
record over 170 songs in MP3 sound quality. An USB stick or SD/MMC card can record even more.
Obviously the PSS-10 works also with normal audio CD’s.
4. Selecting Tracks
• Press the F.Skip (5, 65) or B.Skip (9, 67) button to move to a higher or
lower track.
• Hold the F.Skip (5, 65) or the B.Skip (9, 67) button to change tracks
continuously at a higher speed.
• When a new track is selected during playback, playback begins as soon as the skip search operation is
completed.
• If the F.Skip (5, 65) is pressed while at the last track, the first track is selected. In the same way, if the
B.Skip (9, 67) is pressed while at the first track, the last track is selected.
5. Starting Playback
• Press the Play/Pause (14, 66) button during the pause or stop condition to start playback.

14
6. Stop Playback
• Press the Play/Pause (14, 66) button during playback to pause at that point.
7. Pausing
• Press the Play/Pause (14, 66) button to switch between play and pause.
• Playback resumes when the Play/Pause (14, 66) button is pressed again.
Operation of the wireless microphones
Inserting/replacing the battery
We recommend powering the microphone by a 9 V PP3 alkaline battery.
Fig. 5
Turn the battery compartment cover in the direction of the arrow and remove the cover.
Insert the battery. Please observe correct polarity when inserting the battery.
Close and lock the battery cover.
Tips for achieving maximum performance.
Make sure you can always see a receiver antenna from the transmitter position.
Keep the distance from transmitter to receiver antenna as short as possible.
Point the receiver antennas away from each other at 45 degrees angle from vertical position.
Avoid placing the receiver antennas near metal surfaces and obstructions.
Replace battery as soon as low battery LED lights.
Perform a walk-through before performance or presentation. If dead spots are found, adjust the
location of the receiver. If dead spots remain, mark the dead spots and avoid them.
Before switching off the power
When you have finished using the CD player. Press the Eject (23) button. When the disc is completely
ejected, take out the disc without using force. Now you can safely switch off the power.
CAUTION:
• Do not try to insert the disc when the power is off.
• Do not switch off the power, while the disc is ejecting.
• Switch off the power after the disc has been completely ejected.
CD’s
Precautions on handling compact discs
• Do not allow fingerprints, oil or dust to get on the surface of the disc. If the disc is dirty, wipe it off with a
soft dry cloth.
• Do not use thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths
to clean discs.
• Always handle discs carefully to prevent damaging the surface; in particular when removing a disc
from its case or returning it.
• Do not bend the disc.
• Do not put the CD near heating sources.
• Do not enlarge the hole in the center of the disc.
• Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen.
• Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in
winter. Do not attempt to dry the disc with a hair dryer, etc.

15
Approval
The DAP D2604 is a Class II wireless device.
195,00 MHz and 202,00 MHz for use in: Germany, Italy, Luxemburg, Netherlands, Switzerland,
United Kingdom.
Exclusion of liability
The frequency tables in this publication are made according to national laws and regulations. The
frequencies are checked on a regular basis. We don’t take any responsibility for eventual discrepancies
between our listed frequencies and the frequencies actually approved in a given country. We strongly
suggest you to inform in your own country or region for any changes or adaptions regarding the allowed
frequencies.
Please refer to your authority as listed below:
Telecoms & Postal Regulatory Authorities in Europe
Austria Rundfunk und Telekom Regulierungs-GmbH www.rtr.at
Belgium Belgian Institute of postal services and telecommunications (BIPT) www.bipt.be
Czech Republic Czech Telecommunication Office www.ctu.cz
Denmark National Telecom Agency www.tst.dk
Finnland Finnish Communications Regulatory Authority (FICORA) www.ficora.fi
France Autorité de Régulation des Télécommunications (ART) www.art-telecom.fr
Germany Die Bundesnetzagenturie B www.bundesnetzagentur.de
Greece National Telecommunications Commission (EET) www.eett.gr
Hungary Communication Authority (HIF) www.hif.hu
Iceland Post and Telecom Administration (PTA) www.pta.is
Ireland Commission for Communications Regulation (ComReg) www.comreg.ie
Italy Italian Communications Authority (AGC) www.agcom.it
Latvia Telecommunication State Inspection www.vei.lv
Liechtenstein Office for Communications (AK) www.ak.li
Lithuania Radio Administration www.rrt.lt
Luxembourg Institut Luxembourgeois des Télécommunications (ILT) www.etat.lu/ILT
Netherlands Onafhankelijke Post en Telecommunicatie Autoriteit (OPTA) www.opta.nl
Agentschap Telecom www.agentschap-telecom.nl
Ministry of Economic Affairs www.ez.nl
Norway Norwegian Post and Telecommunications Authority (NPT) www.npt.no
Poland Urzad Regulacji Telekomunikacji (URT) www.urt.gov.pl
Portugal Autoridad Nacional De Comunicaçòes (ICP-Anacom) www.anacom.pt
Slovenia Agencija za telekomunikacije, radiodifuzijo in pošto www.atrp.si

This certifies that the following designated product:
Name: PSS-110 Portable Speaker Syst em 10"
Model No.: D2604
Brand Name: DAP AUDIO
Authorized by the European Union to act as Conformity Assessment
Body in accordance with the R&TTE Directive 1999/5/EC
EN 301 489-1 V1.8.1:2008
EN 301 489-9 V1.4.1:2007
EN 300 422-1 V1.3.2:2008
EN 300 422-2 V1.2.2:2008
The device shall be marked as follows:
1177
This certificate is issued by: Highlite International B.V.
(Name/Address) Vestastraat 2, 6468 EX Kerkrade
The Netherlands
This is the result of tests carried out on those 01-March-2011
samples of the product referred to above which
were submitted for testing, in accordance with (Date)
the specification for the respective standards.
The certificate holder has the right to fix the mark
which shows the segment onto each individual
product in the series to which the inspection sample Mr. H. de la Haye, general manager
belongs, provided that the product is manufactured
in accordance with the test report. Instructions (Name / Signature)
available on demand.
(Product Identification)
Declaration
OF CONFORMITY

This certifies that the following designated product:
Name: PSS-110 Portable Speaker Syst em 10"
Model No.: D2604
Brand Name: DAP AUDIO
complies with the requirements of the European Union Directive 2004/108/EC
This certificate is awarded following tests carried out on samples of the product referred to
above. Assumption of compliance of the product with the requirements relating to the
Electromagnetic compatibility (EMC) was based on the following standards:
Identification of regulations / standards:
EN 55013
EN 55020
EN 61000-3-2
EN 61000-3-3
This certificate is issued by: Highlite International B.V.
(Name/Address) Vestastraat 2, 6468 EX Kerkrade
The Netherlands
.
This is the result of tests carried out on those
samples of the product referred to above which 19-March-2011
were submitted for testing, in accordance with (Date)
the specification for the respective standards.
The certificate holder has the right to fix the mark
which shows the segment onto each individual
product in the series to which the inspection sample Mr. H. de la Haye, general manager
belongs, provided that the product is manufactured
in accordance with the test report. Instructions (Name / Signature)
available on demand.
(Product Identification)
Declaration
OF CONFORMITY

This certifies that the following designated product:
Name: PSS-110 Portable Speaker Syst em 10"
Model No.: D2604
Brand Name: DAP AUDIO
complies with the requirements of the European Union Directive 2006/95/EC
This certificate is awarded following tests carried out on samples of the product referred to
above. Assumption of compliance of the product with the requirements relating to the
Low voltage directive (LVD) was based on the following standards:
Identification of regulations / standards:
EN 60065: 2002+A11:2008
This certificate is issued by: Highlite International B.V.
(Name/Address) Vestastraat 2, 6468 EX Kerkrade
The Netherlands
This is the result of tests carried out on those 14-March-2011
samples of the product referred to above which
were submitted for testing, in accordance with (Date)
the specification for the respective standards.
The certificate holder has the right to fix the mark
which shows the segment onto each individual
product in the series to which the inspection sample Mr. H. de la Haye, general manager
belongs, provided that the product is manufactured
in accordance with the test report. Instructions (Name / Signature)
available on demand.
(Product Identification)
Declaration
OF CONFORMITY