Data Sync Engineering WC0 User manual

Model: WC3
Data Sync Engineering
P.O. Box 539, 2 Footbridge Lane
Blairstown, New Jersey 07825
TEL: [phone]
FAX: [phone]
www.cdadapter.com
[e-mail]
Copyright © 2012 Data Sync Engineering. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
• Adapter is powered directly from the 25VAC wallbox supply
• Plugs into the CD jukebox "Selection & Credit Computer"
• Selectable "first two or ten" songs from each consecutive CD
• Dim: 2.26" x 1.61" x 0.75" with 18" wires, 48" SCC cable
• Contact Data Sync for other custom version models
Features
Seeburg 3W1 (1949)
100 Select
Wallbox Adapter for Wurlitzer CD
Wallbox Adapter for Wurlitzer CD
Connect Vintage Wallboxes To Your Wurlitzer CD Jukebox
ALL ADAPTER MODELS
MODEL WALLBOX INPUT TYPE
WC0 Rock-Ola 500/1555/1558
WC1 Seeburg Consolette SC1-4/SCH1-4
WC2 Wurlitzer 5210/5220/5250
WC3 Seeburg 3W1/3W100
WC4 Seeburg 3WA
WC5 Rowe WRA/WRB/WRC
WC6 AMI W-40/W-80/W-120/WQ-200
WC7 Wurlitzer 5207
WC8 Wurlitzer 5225
WC9 Wurlitzer 3020
Add suffix "E" for 50Hz — example: WC3E
New Orleans
Rave On
New York
OMT CD
Classic

25VAC
COMMON
Blue
Green
Orange COMMON
25 VAC
WALLBOX ADAPTER WIRING DIAGRAM
25VAC
COMMON
CAUTION: Do not attempt to hook up a wallbox power supply if you are not familiar with electrical
wiring, consult with a qualified person or an electrician. Do not leave any wires exposed, always use
wire-nuts or electrical tape on all connections. Improper wiring can result in a fire or shock hazard.
The wallbox requires a 25-Volt
A.C. power supply to operate.
If your jukebox does not have
a wallbox power supply, you
can build the one shown here.
A power cord, in-line fuse
(recommended) and power
transformer (Radio Shack Part
# 273-1512 or equiv) are the
parts needed.
25VAC POWER SUPPLY
In-line fuse holder
with 1 Amp fuse
Power Transformer
24-30 VAC, 2 Amps
Power cord
Black wire is not used.
Apply tape or wire nut.
Radio Shack
273-1512
Yellow
Yellow
SIGNAL
Seeburg
Wall-o-matic
3W1 / 3W100
100 select
25VAC
COMMON
SIGNAL
Wallbox Terminals
25VAC
Power
Supply
ACTIVITY INDICATOR
When the wallbox is powered up, the adapter LED
will light for two seconds to indicate ready.
The LED will light when receiving a wallbox signal
or transmitting to the Selection & Credit Computer.
No flash at power up indicates mis-wired wallbox
connections or a defective adapter.
Steady on indicates a wallbox problem or mis-wired
connections.
The Wallbox Adapter plugs into the 4-Pin connector position "X8" on
the Wurlitzer Selection & Credit Computer. Black wire at the bottom.
Selection &
Credit Computer
CD SELECT OPTION
First ten (10) tracks
on each consecutive
CD, starting with CD
number "01".
Place red jumper on
the upper two pins
at the "W1" position.
(Factory default)
First two (2) tracks
on each consecutive
CD, starting with CD
number "01".
Place red jumper on
the lower two pins
at the "W1" position.