rtd ADP065 User manual

RTD Embedded Technologies, Inc.
AS9100 and ISO 9001 Certified
ADP065
USB 3.0 and SATA Adapter
for PCIe/104 Type 2
User’s Manual
BDM-610040015 Rev. A

RTD Embedded Technologies, Inc.
103 Innovation Boulevard
State College, PA 16803 USA
Telephone: [phone]
Fax: [phone]
www.rtd.com
[email protected]
[email protected]

RTD Embedded Technologies, Inc.
AS9100 and ISO 9001 Certified
Revision History
Rev A Initial Release
Advanced Analog I/O, Advanced Digital I/O, aAIO, aDIO, a2DIO, Autonomous SmartCal, “Catch the Express”, cpuModule, dspFramework, dspModule, expressMate, ExpressPlatform, HiDANplus, “MIL Value for
COTS prices”, multiPort, PlatformBus, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule, IDAN, HiDAN, RTD, and the RTD logo are registered trademarks of RTD Embedded
Technologies, Inc (formerly Real Time Devices, Inc.). PS/2 is a trademark of International Business Machines Inc. PCI, PCI Express, and PCIe are trademarks of PCI-SIG. PC/104, PC/104-Plus, PCI-104, PCIe/104,
PCI/104-Express and 104 are trademarks of the PC/104 Embedded Consortium. All other trademarks appearing in this document are the property of their respective owners.
Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed
by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not
be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.
Copyright © 2015 by RTD Embedded Technologies, Inc. All rights reserved.

RTD Embedded Technologies, Inc. | www.rtd.com iv ADP065 User’s Manual
Table of Contents
1Introduction 6
1.1 Product Overview........................................................................................................................................................................ 6
1.2 Board Features ........................................................................................................................................................................... 6
1.3 Contact Information .................................................................................................................................................................... 6
1.3.1 Sales Support 6
1.3.2 Technical Support 6
2Specifications 7
2.1 Operating Conditions .................................................................................................................................................................. 7
2.2 Electrical Characteristics ............................................................................................................................................................ 7
3Board Connection 8
3.1 Board Handling Precautions ....................................................................................................................................................... 8
3.2 Physical Characteristics.............................................................................................................................................................. 8
3.3 Connectors and Jumpers............................................................................................................................................................ 9
3.3.1 External I/O Connectors 9
USB1 & USB2: USB 3.0 Connectors 9
SATA1 & SATA2: SATA Connectors 10
3.3.2 Bus Connector 10
Bottom: PCIe Connector 10
3.4 Selecting the Stack Order for the ADP065 ............................................................................................................................... 10
3.5 Steps for Installing .................................................................................................................................................................... 11
4Functional Description 12
4.1 Functional Diagram................................................................................................................................................................... 12
4.2 Backwards Compatibility with USB 2.0..................................................................................................................................... 12
4.3 Power........................................................................................................................................................................................ 12
5Troubleshooting 13
6Additional Information 14
6.1 PC/104 Specifications............................................................................................................................................................... 14
6.2 PCI Express Specification ........................................................................................................................................................ 14
7Limited Warranty 15

RTD Embedded Technologies, Inc. | www.rtd.com vADP065 User’s Manual
Table of Figures
Figure 1: Board Dimensions (inches) ....................................................................................................................................................................... 8
Figure 2: Board Connectors...................................................................................................................................................................................... 9
Figure 3: Example 104™Stack............................................................................................................................................................................... 11
Figure 4: ADP065 Functional Diagram................................................................................................................................................................... 12
Table of Tables
Table 1: Operating Conditions .................................................................................................................................................................................. 7
Table 2: Electrical Characteristics ............................................................................................................................................................................ 7
Table 3: USB Port Connections................................................................................................................................................................................ 9
Table 4: SATA Port Connections............................................................................................................................................................................ 10

RTD Embedded Technologies, Inc.
AS9100 and ISO 9001 Certified
1Introduction
1.1 Product Overview
The ADP065 is a rugged dual-port USB 3.0 and SATA adapter for host modules which provides these connections over a PCIe/104 Type 2
connector. This adapter breaks out the USB 3.0 and SATA data connections on the bus connector for easy cabled accessibility, while adhering
to the stacking requirements of PC/104, allowing easy integration into a PC/104 system.
The USB 3.0 links on the ADP065 are backwards compatible with USB 2.0, permitting breakout of all USB ports on a host’s top-side PCIe/104
Type 2 bus. The ADP065’s utilization of a host’s PCIe/104 USB links avoids bandwidth starvation of the host’s primary USB I/O connections,
making this module a useful accessory to any of RTD’s Intel Core i7, AMD Fusion G-Series, Intel Core 2 Duo, and Intel Celeron M single board
computers.
1.2 Board Features
PCIe/104 stackable bus structure
oPCIe/104 Type 2 Connectors
Dual-port USB 3.0 breakout
oProvides access to both USB 3.0 links available on a host’s top-stacking PCIe/104 Type 2 connector
oBackwards compatible with USB 2.0
Dual SATA data connectors
oProvides access to both SATA links available on a host’s top-stacking PCIe/104 Type 2 connector
Stacks above the host cpuModule
1.3 Contact Information
1.3.1 SALES SUPPORT
For sales inquiries, you can contact RTD Embedded Technologies sales via the following methods:
Phone: [phone] Monday through Friday, 8:00am to 5:00pm (EST).
E-Mail: [email protected]
1.3.2 TECHNICAL SUPPORT
If you are having problems with you system, please try the steps in the Troubleshooting section of this manual.
For help with this product, or any other product made by RTD, you can contact RTD Embedded Technologies technical support via the
following methods:
Phone: [phone] Monday through Friday, 8:00am to 5:00pm (EST).
E-Mail: [email protected]

RTD Embedded Technologies, Inc. | www.rtd.com 7ADP065 User’s Manual
2Specifications
2.1 Operating Conditions
Table 1: Operating Conditions
Symbol
Parameter
Test Condition
Min
Max
Unit
Vcc5
5V Supply Voltage
4.75
5.25
V
Vcc5-STBY1
5V Standby Voltage
4.75
5.25
V
Vcc32
3.3V Supply Voltage
n/a
n/a
V
Vcc122
12V Supply Voltage
n/a
n/a
V
Vcc-122
-12V Supply Voltage
n/a
n/a
V
Ta
Operating Temperature
-40
+85
C
Ts
Storage Temperature
-55
+125
C
RH
Relative Humidity
Non-Condensing
0
90%
%
2.2 Electrical Characteristics
Table 2: Electrical Characteristics
Symbol
Parameter
Test Condition
Max
Unit
P1
Power Consumption
Vcc5 = 5.0V
1.0
mW
USB Ports
IUSB3
Supply Current
Both ports (combined)
0.8
A
1
Power consumption does not include current drawn from connected USB devices.
2
The 3.3V, 12V, and -12V rails are not used by the ADP065. Any requirements on these signals are driven by other components in the system.
3
Power delivered to the USB 3.0 ports may be limited by the host cpuModule.

RTD Embedded Technologies, Inc. | www.rtd.com 8ADP065 User’s Manual
3Board Connection
3.1 Board Handling Precautions
To prevent damage due to Electrostatic Discharge (ESD), keep your board in its antistatic bag until you are ready to install it into your system.
When removing it from the bag, hold the board at the edges, and do not touch the components or connectors. Handle the board in an antistatic
environment, and use a grounded workbench for testing and handling of your hardware.
3.2 Physical Characteristics
STEP model is available upon request; contact RTD Tech Support for more information.
Weight: Approximately 0.0204 Kg (0.045 lbs.)
Dimensions: 25.146 mm L x 90.17 mm W (0.990 in L x 3.550 in W)
Figure 1: Board Dimensions (inches)

RTD Embedded Technologies, Inc. | www.rtd.com 9ADP065 User’s Manual
3.3 Connectors and Jumpers
Figure 2: Board Connectors
3.3.1 EXTERNAL I/O CONNECTORS
USB1 & USB2: USB 3.0 Connectors
Two USB 3.0 compliant connectors are available on the ADP065. With the ADP065 stacked above the CPU, USB2 breaks out the higher order
port, and connector USB1 breaks out the lower order port.
Table 3: USB Port Connections
ADP065 Stack Location
USB1
USB2
Stacked Above the CPU
CPU top-side port 0
CPU top-side port 1
NOTE: For proper operation at USB 3.0 (or USB 2.0) speeds, be sure to use a
cable that is rated for USB 3.0 (or USB 2.0)

RTD Embedded Technologies, Inc. | www.rtd.com 10 ADP065 User’s Manual
SATA1 & SATA2: SATA Connectors
Two SATA connectors are available on the ADP065. With the ADP065 stacked above the CPU, SATA2 breaks out the higher order port, and
connector SATA1 breaks out the lower order port. Both connectors permit connectivity with latching or non-latching SATA cables.
Table 4: SATA Port Connections
ADP065 Stack Location
SATA1
SATA2
Stacked Above the CPU
CPU port 0
CPU port 1
3.3.2 BUS CONNECTOR
Bottom: PCIe Connector
The PCIe connector is the connection to the system CPU. The position and pin assignments are compliant with the PCIe/104 Specification.
(See PC/104 Specifications on page 14)
The ADP065 is a Type 2 board, and must connect to a Type 2 PCIe/104 connector.
3.4 Selecting the Stack Order for the ADP065
The following is a list of rules to determine where the ADP065 falls within the stacking order of the system. These rules may be overridden by
the devices hosting the USB 3.0 and SATA connections.
1. If a SATA link is used (with no USB 3.0 link), the ADP065 must be placed within six boards of the CPU.
2. If a USB 3.0 link is used, the ADP065 must be within four boards of the CPU.