Converters.TV CB-11 User manual

UHF/VHF/FM Home Distributor
(CB-11)
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Introduction
This unit has been designed to be a cable/TV full band amplification and distribution
adaptor.
recautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•Designed for cable /TV full band amplification and distribution adaptor powered,
sleek exterior, ideal for indoor use.
•SMT Technology ensures high reliability and durability.
•RFI shielded metal housing provides excellent isolation to external interference.
•LED display power ON.
•Maximum 20 dB gain adjustment for each output
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Operation Control and functions
Top View
1. Gain control- Adjust the level of amplification to the desired level. Turn the knob
clockwise for higher gain. The maximum gain is 20dB.
2. ower LED- This will light up when the power supply has been turned on.
Back Panel
1. RF output 1- This is an RF output port.
2. RF output 2- This is an RF output port.
3. RF output 3- This is an RF output port.
4. RF output 4- This is an RF output port.
5. RF input- This is an RF input port.
6. DC 12V Input- Connect your power supply here.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv

Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
- Using your connector cable connect the output port (Number 1/2/3/4 on the rear
panel) to the output device (TV).
- Using your connector cable connect the input port (Number 5 on the rear panel) to the
input device (VHF/UHF TV Antenna).
- Use the gain control knob to adjust the level of amplification (Number 1 on the top
view panel).
Once all connections are complete please connect the power supply provided to the
power socket.
Specifications
Frequency Range 40-862 MHz
Gain 20 dB (40-750 MHz) 750-850 MHz
10dB
Gain Control 0-20 dB
Noise Figure Less than 5 dB
Max. Output level at –60 dB
intermodulation distortion
90 dB
Input 75 ohm, F-Connector *1
Output 75 ohm, F-Connector *4
ower Source DC 12V, 200mA Center positive
Dimension 145 (D) X 90 ( ) X 33 (H)
Weight 750 Grams
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone [phone] Fax [phone]
www.converters.tv