Davis & Shirtliff Dayliff Installation instructions

Installation &
Operating Manual
MINERAL WATER POT

SPECIFICATIONS
1.
1
3.
INSTALLATION 3
INDEX
© Davis & Shirtliff Ltd 2020
Contents herein are not warranted
4. MAINTENANCE 4
5. TERMS OF WARRANTY 5
TREATMENT PROCESS
2.
1

1
1. SPECIFICATIONS
CERAMIC FILTER CARTRIDGE
Congratulations on selecting a Dayliff Mineral Water Pot. They are
manufactured to the highest standards and if installed and operated
correctly will give many years of efcient and trouble free service. Careful
reading of this Installation Manual is therefore important, though should
there be any queries they should be referred to the equipment supplier.
Dayliff Water Pots are 8 stage purifiers to provide quality drinking water from
municipal sources water being poured in the top tank and then feeding through the
treatment filter to provide pure healthy water at the outlet. Flow is approximately
30L/day and total capacity is 14L with 9L of treated water storage. The treatment
process includes:-
l Fine ceramic filter for light silt and bacteria removal.
l 5 level multi media cartridge for taste and odour conditioning.
l Zeolite based water softening.
l Mineral module to add essential minerals to the water making it healthy and give
a fresh taste.
l Magnetic Water tap to enhance the absorption to nutrients and supplements in
the body cells.
The ceramic filter is made of highly compressed
ceramic diatomaceous earth porus structure of
0.2µm less than half size of bacteria (0.5 - 1.0µm) It
is therefore effective in filtering rust, dust, sand, silt
and bacteria such as cholera, typhoid, coliform etc.
2. TREATMENT PROCESS

2
MINERAL STONE FILTER CARTRIDGE
The mineral stone is infused with healthy elements
which are re-inroduced into the water for extra
benefit. These include potassium, sodium, calcium
and magnesium.
5 STAGE CARTRIDGE
1. Granular Activated Carbon (1st layer of cartridge)
Carbon has a long history of being used to absorb impurities and it is the most
powerful absorbent known. This filter traps taste, dirt, rust, silt, chemicals and
chlorine.
nd
2. Zeolite (2 layer of cartridge)
Zeolite is a natural volcanic material with a unusual crystalline structure and a
unique ability to exchange cations i.e the positively charged ions. This substitution
of ions enables zeolites to selectively absorb certain harmful and unwanted
elements from water. Zeolite exchanges sodium ions for calcium ions which results
in soft water. Zeolite also have a strong affinity for harmful heavy metals such as
mercury, lead and chromium.
rd
3. Silica Sand (3 layer of cartridge)
Silica is a combination of oxygen and silicon, the two most prevalent elements on
earth. Silica is the mineral building block that promotes healthy bone connective
tissue and helps prevent premature aging. Its porous structure also enables
absorption of bad elements in the water. One of its unique characteristics is it keeps
the water cool and fresh.

3
MAGNETIC WATER TAP
The outlet of Mineral Water Pot is provided with a
magnetic tap which changes the water structure to
free moving hexagonal water molecules which
enhance absorption of nutrients and supplements in
body cells.
4. Mineral Sand Filter
Useful in water conditioning by improving water quality and smell.
5. ION Exchange Resin
Useful compound in the removal of calcium and magnesium ions from water by
exchanging them with harmless sodium ion, thereby softening hard water.
3. INSTALLATION
1. LID
2. UPPER TANK
3. MIDDLE BASE
4. CERAMIC CARTRIDGE
5. 5-STAGE CARTRIDGE
6. CARBON CARTRIDGE
7. MINERAL STONE
8. LOWER TANK
9. WATER TAP
10. BOTTOM BASE
1
2
4
3
5
6
7
8
9
10

4
4. MAINTENANCE
1. Clean the ceramic cartridge after every 7 days using a soft brush.
2. Clean the carbon cartridge after every 10 days.
3. Replace all cartridges after 10 months.

5. TERMS OF WARRANTY
ŸIn lieu of any warranty, condition or liability implied by law, the liability of Dayliff in
respect of any defect or failure of equipment supplied is limited to making good
by replacement or repair (at the Company’s discretion) defects which under
proper use appear therein and arise solely from faulty design, materials or
workmanship within a specified period. This period commences immediately
after the equipment has been delivered to the customer and at its
termination all liability ceases. Also the warranty period will be assessed on the
basis of the date that the Company is informed of the failure.
ŸThe warranty applies solely to equipment supplied and no claim for
consequential damages, however arising, will be entertained. Also the warranty
specifically excluded defects caused by fair wear and tear, the effects of careless
handling, lack of maintenance, faulty installation, incompetence on part of the
equipment user, Acts of God or any other cause beyond the Company’s
reasonable control. Also, any repair or attempt at repair carried out by any other
party invalidates all warranties.
i) General Liability
If equipment failure occurs in the normal course of service having been competently
installed and when operating within its specified duty limits warranty will be provided
as follows:-
Ÿ Up to six months - The item will be replaced or repaired at no charge.
Ÿ Over six months, less than one year - The item will be replaced or
repaired at a cost to the customer of 50% of the Davis & Shirtliff market
price.
The warranty on equipment supplied or installed by others is conditional upon the
defective unit being promptly returned free to a Davis & Shirtliff ofce and
collected thereafter when repaired. No element of site repair is included in the
warranty and any site attendance costs will be payable in full at standard charegeout
rates. Also proof of purchase including the purchase invoice must be provided for a
warranty claim to be considered.
ii) Standard Warranty
5

INS417BA-07/20
www.davisandshirtliff.com