........... BGB30-BQR
30" Grill Dimensions (with optional
Grill Model: BGB30-BQR
Cart Models: BGA30-CSS/CAD-30
68-1/2" (shelvesup)
38-1/2" (shelvesdown)
28-5/8"--
-- 32-3/8"--
-6-112"
50-318"
-- 26-I/2"--
24-I,4"__i
I0"I12"
.......................23-112"--
--25-5/8" --
26-7/8"--
S0-3/8"
36- 2"
MODEL NUMBER BGB30-BOR
TOTALCOOKINGAREA 760 SO. INCHES
PRIMARYCOOKINGAREA [GRILLAREA] 565 SO, INCHES
SECONDARYCOOKINGAREA [WARMINGRACK] 195 SO. INCHES
GRILLBURNERS 2 @ 25,000 BTU/HR
OPTIONALSIDEBURNER[CARTMOUNT] I OR 2 @ 17,000 BTU/HR
INTEGRATEDROTISSERIEBURNER 1 @ 14,000 BTU/HR
GRILLGRATES STAINLESSSTEEL
SHIPPINGWEIGHT[GRILLHEAD] 164 LBS.
SHIPPINGWEIGHT[OPTIONALCART) 95 LBS.
SHIPPINGDIMENSIONS]HEIGHTXWIDTHXDEPTH[ 28" X 32-1/2"X 29-1/2"
grill cart] 30" Grill Island Preparation
Grill Model: BGB30-BQR
Note: Locate ebctrical
service on the right hand
side for rotisserie motor
connection.
23-3/4....
access doors
(ADN2Ox30}
access drswers
{ADR30)
I"
* Standard cut-out dirnerlsions for rlorl-combustible erlclosure
** Insulated jacket cut-out dirnerlsiorls for combustible erlclosure
,*, Islarld irlstallatiorl to use mirlirnurn of 3 verlts providirlg
10 square irlches per verlt (typical).
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
1/2" NPT male with a 3/8" flare adapter
Operational Pressure: 4" W.C.
Supply Pressure: 6" to 9" W.C.
Propane
1/2" NPT male with a 3/8" flare adapter
LP hose with a quick disconnect & fitting are shipped connected
Operational Pressure: 10" W.C.
Supply Pressure: 11" to 14" W.C.
Power Requirements:
1 20V 60Hz for models with Rotisserie Motor.
Island Ventilation Requirements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosure in the event of a gas leak.
Grill Placement:
DO NOT build grill under overhead unprotected combustible
construction. Use only in well-ventilated areas. These units are
for outdoor use only. If located in a consistently windy area
(oceanfront, mountaintop, etc.) a wind break will be required.
Conversion Kits:
NG to LP and LP to NG conversion kits are available from your dealer:
Accessories
• Stainless Steel Grill Cart (CAD-30, BGB30-CSS)
• Single or double side burners for built-in application
• Stainless Steel Access Doors for built-in application
• Stainless Steel Access Drawers for built-in application
• Insulated Jacket for built-in application
• Grilling Tool Set
• Brazilian Cherry Chopping Board that fits in cart side-shelf
• Drop-on Griddle Plate
• Vinyl Grill Cover
• Wok and Wok Ring for use on side burners
We erlcourage you to firld out rnore about these features arid learrl how they carl
make your cookirlg experierlce more erljoyable by visitirlg our learrlirlg page at:
www.dcsappliances.corn.
Because of eorltirluirlg product improvemerlt these specificatiorls are subject to
charlge without rlotice.
for
