Dedoes 800565 User manual

For technical support on our products or addional accessories, please call us at 248-624-7710 or visit our web site: www.dedoes.com
Internaonal H2O Cabinet Part’s List
Part No: 800565
PART # P1178 KD REV#2 - 12/13/2011
2
10
21
31
18
9
11
7
24
14
22
6
32
19
33
12 13 4
4
27
25
26
20
16
15
7
884
17
12
13
BOTTOM TRACK ASSY
30
12
13
23 28
29
23
28
29
MID TRACK
ASSY
TOP TRACK ASSY
ITEM
NO.
QTY. DESCRIPTION PART NO
1 1
SHELF BASE BOTTOM (NOT SHOWN)
F600754
2 1
PNL SIDE RH BASE
C00755W
3 82
5mm KEP NUT PLATED (NOT SHOWN)
P1123
4 104
5mm PHILLIPS PAN HEAD SCREW
P1124
5 22
AVK 5mm THREADED INSERT (NOT SHOWN)
P0696
6 1
PNL SIDE LH BASE
C00756W
7 2
PNL BASE FRT & RR FRNT & RR BASE PANEL
C00757W
8 2
FOOT GALV.
F600753
91
LOWER UNIT BASE SHELF
F600733
10 1
SIDE PNL RH LWR UNIT
C00731W
11 1
PNL SIDE LH LOWER UNIT
C00732W
12 2
DOOR TRACK 9.53mm X 25.79mm
C00764W
13 2
DOOR TRACK 8.74mm X 19.01mm
C00763W
14 5
SHELF COMMON
F600730
15 1
BACK LWR ON LWR UNIT
F600738
16 1
BACK UPR ON LWR UNIT
F600737
17 35
RIVET POP 5/32 ALUM
P0174
ITEM
NO.
QTY. DESCRIPTION PART NO
18 2
DOOR PLEXIGLASS LOWER DOOR
P1118
19 2
HANDLE PULL LOWER PLEXI HANDLE
C00765W
20 2
GROMMET RUBBER BUNA-N RUBBER
P1120
21 1
PNL SIDE RH UPPER
C00734W
22 1
PNL SIDE LH UPPER
C00735W
23 2
DOOR TRACK 20.88mm X 33.78mm
C00762W
24 1
HEADER
C00741W
25 1
BACK UPR ON UPR UNIT
F600740
26 1
BACK LWR ON UPR UNIT
F600739
27 1
COVER TOP
C00752W
28 2
DOOR TRACK 19.05mm X 25.77mm
C00761W
29 2
DOOR TRACK 18.21mm X 18.99mm
C00760W
30 1
DOOR TRACK 11.35mm X 33.78mm
C00759W
31 2
PLEXIGLASS DOOR UPPER DOOR
P1117
32 2
HANDLE PULL UPPER
C00736W
33 2
F600345 UNIVERSAL WALL ANCHOR
F600345

For technical support on our products or addional accessories, please call us at 248-624-7710 or visit our web site: www.dedoes.com
Internaonal H2O Cabinet Assembly Instrucons
Part No: 800565
PART # P1178 KD REV#2 - 12/13/2011
Figure 3
Step 1:
PLACE BASE UNIT ON FLOOR . IF FRONT AND
REAR PANELS HAVE THREADED INSERTS IN THE TOP
THEN THERE IS NO FRONT OR REAR. IF ONE PANEL HAS
PLAIN HOLES IN THE TOP, THEN THAT IS THE FRONT
PANEL.
Figure 1
Figure 2
Step 2:
PLACE LOWER UNIT ON TOP OF BASE UNIT AND
FASTEN THE TWO UNITS TOGETHER WITH NINE
5mm PHILLIPS HEAD SCREWS. FASTEN LOWER
UNIT TO BASE UNIT AT LEFT AND RIGHT SIDE
PANELS AND ALONG REAR PANEL.
Step 3:
PLACE THE UPPER UNIT ON TOP OF THE
LOWER UNIT AND FASTEN TOGETHER WITH
FOUR 5mm SCREWS AND NUTS. FASTEN
ONLY AT THE 2 REAR CORNERS AND 2
PLACES ON THE BACK PANEL.

For technical support on our products or addional accessories, please call us at 248-624-7710 or visit our web site: www.dedoes.com
PART # P1178 KD REV#2 - 12/13/2011
A
C
Figure 4
B
DETAIL A
SCALE 1 : 5
DETAIL B
SCALE 1 : 2
DETAIL C
SCALE 1 : 5
MID DOOR TRACK
ASSEMBLY
FASTEN MID DOOR TRACK ASSEMBLY TO FRONT
CORNERS OF SIDE PANELS WITH TWO 5mm
SCREWS AND NUTS. SEE DETAIL "A" AND " B".
FASTEN HEADER TO TOP OF CABINET WITH TWO
5mm SCREWS. SEE DETAIL "C".
INSTALL PLEXIGLASS DOORS INTO UNITS.
PLACE TOP EDGE OF GLASS ALL THE WAY INTO TOP
OF UPPER TRACK AND SWING LOWER EDGE OF
GLASS OVER BOTTOM TRACK AND LOWER INTO
DOOR TRACK.
MOVE CABINET INTO POSITION AND SECURE IN PLACE
BY MOUNTING 2 ANGLE BRACKETS ON TOP OF CABINET
TO WALL.
STEP 4
Internaonal H2O Cabinet Assembly Instrucons
Part No: 800565