Delfield SARRI1-S User manual

SPECIFICATION LINE: SELF CONTAINED SOLID DOOR ROLL-IN REFRIGERATOR
Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
Specification Line
Self-Contained Solid Door Roll-In Refrigerator
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: [phone]
Fax: [phone]
Email: info@delfield.com
Approval _________________
Date____________________
SSRRI2-S
SPECIFICATIONS
Exterior: Cabinet exterior sides, front and shroud
shall be 22-gauge, corrosion resistant stainless steel.
Upper shroud shall be hinged, with stay-open feature
to provide easy access to refrigeration system.
Interior: Cabinet interior shall be 22-gauge, corrosion
resistant stainless steel (SS models) or heavy gauge
aluminum (SA models). Bottom and top surfaces are
die stamped to provide radius corners and recessed
floor. Interior light, mounted to the interior ceiling is
controlled automatically through a switch mounted in
the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless
steel breaker strips. An air duct is mounted to the
ceiling assuring low velocity, even air movement
throughout the cabinet interior.
Solid Doors: Exterior shall be 22-gauge, corrosion
resistant stainless steel. Interior liner shall be resilient high
impact ABS material, formed to protrude beyond the door
gasket to protect the gasket from tearing. Each door has
two edge mount, self closing, cam lift style hinges. Doors
can be removed from cabinet without the use of tools.
Metal door handle is recessed into the door for easy grip
without impacting aisle space. Keyed door lock is mounted
in the door next to the handle. Lock engages into a heavy
duty strike mounted to the cabinet face. Door gaskets are
magnetic and mount to the door snapping in place and are
removable without tools.
Refrigeration system: All components are mounted to
the exterior cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between 27˚F and 40˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which
provides improved pull down times, reducing compressor
cycling and longer compressor life with lower energy
consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V,
60Hz, single phase. A 10’ cord and plug is supplied
attached to a junction box mounted on the exterior
top of the cabinet. Three section standard voltage is
115/208-230V, 60Hz single phase. Electrical connection
must be hard wired to junction box.
MODELS
 SSRRI1-S 1 section stainless interior
full door
 SARRI1-S 1 section aluminum interior
full door
 SSRRI2-S 2 section stainless interior
full door
 SARRI2-S 2 section aluminum interior
full door
 SSRRI3-S 3 section stainless interior
full door
 SARRI3-S 3 section aluminum interior
full door
STANDARD FEATURES
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Built in door locks with heavy duty strikes
• Recessed metal door handle
• Exterior digital thermometer with high/low
temperature alarm
• Easy to use electronic control
• Easy access “flip up” shroud
• Three chrome plated wire shelves per section
• Tough ABS interior door liners
• 10’ attached cord and plug standard on 115V units
• Stainless steel breaker strips
• Energy savings door heater switch
• Inclined stainless steel exterior ramp
• Environmentally friendly 404A refrigerant
• Two year parts & labor warranty
OPTIONS AND ACCESSORIES
 Security package
 Stainless steel interior door liner
 Stainless steel back
 Laminate on front, sides and back
 Heat shield end
 Stainless steel kick plate
 Full height shelf kit
 Half height shelf kit
 Flat exterior ramp
 High humidity evaporator coil
 Alarm control display
 220-50-1 electrical
 220-60-1 electrical

Specification Line: Self-contained solid door roll-in refrigerator
Model #__________
CSI Section 11400
Printed in the USA.
03/07
DSSSRI
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: [phone]
Fax: [phone]
Email: info@delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice.
Mechanical Data
MODEL
NUMBER VOLTAGE AMPS STORAGE SHELVES SQ.FT. NO. OF SHELVES
UNIT
H.P.
BTU/HR
SYSTEM CAP SHIP WEIGHT NEMA PLUG
SSRRI1-S, SARRI1-S, 115 6.0 36.15 N/A N/A 1/4 2092 476 5-15P
SSRRI2-S, SARRI2-S 115 12.2 74.72 N/A N/A 1/2 3637 768 5-15P
SSRRI3-S, SARRI3-S 115/208-
230 10 113.28 N/A N/A 3/4 6744 1044 N/A
ELEVATION VIEW
SSRRI1-S, SARRI1-S
ELEVATION VIEW
SSRRI2-S, SARRI2-S
PLAN VIEW
SSRRI1-S, SARRI1-S PLAN VIEW
SSRRI2-S, SARRI2-S PLAN VIEW
SSRRI3-S, SARRI3-S
ELEVATION VIEW
SSRRI3-S, SARRI3-S









30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).%









30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).%









30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).%









30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).%









30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).%









30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).%









30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).% 30%#)&)#!4)/.,).%
END SECTION VIEW
ALL MODELS