Dell OptiPlex FX130 User manual

Dell™OptiPlex™FX130
Quick Setup Guide

Notes, Cautions, and Warnings
NOTE: ANOTEindicatesimportantinformation that helpsyou
make better use ofyour thin client
CAUTION: A CAUTION indicates potential damage
to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for
property damage, personal injury, or death.
_____________
Information in this document is subject to change without notice.
© 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission
of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell™, the DELL logo, and OptiPlex™ are trademarks
of Dell Inc.
Other trademarks and trade names may be used in this publication to refer to either the
entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary
interest in trademarks and trade names other than its own.
Power adapter models that may be included are AU1361203N (Elementech International Co.
Ltd.) and FSP036-DGAA1A (FSP Group Inc.)
Regulatory Model: D05U
Regulatory Type: D05U001
March 2011 Rev. A00

| 3
Dell™OptiPlex™FX130
Quick Setup Guide
Before Setting Up Your FX130
NOTE: Place the thin client in its verticalorientation for best
performance.
Your FX130 terminal is shipped with the following items:
1 Power Cord
2 Adapter
3 Terminal Stand (pre-installed)
4 Quick Setup Guide
5 Warranty and Support Information
6 End User License Agreement
7 CD Containing Open Source Code
8 Safety, Environmental, and Regulatory Information
9 DVI-VGA Adapter
NOTE: Inspect all parts visually for damage. If anything is damaged,
please contact Dell immediately to report the issue.

| 4
Setup and Features Information
1
Power Button
2
Network Activity Indicator LED
3
Audio Line Out
4
Microphone
6
USB 2.0 Connectors (2)
6
1
2
3
4
6
Front View

| 5
5
Network Connector
6
USB 2.0 Connectors (2)
7
DVI Connector
8
PS/2 Connector
9
Power Connector
10
Security Cable Slot
5
6
7
8
9
10
Back View

| 6
Quick Setup
1 Connect the monitor to the DVI Connector on the back
of the unit.

| 7
2 Connect the mouse and keyboard to the PS/2 or USB
connectors, depending on what type you have.

| 8
3 Connect the network cable to the Network Connector
on the unit and the other end of the cable to your local
network.

| 9
4 Connect the power supply to the FX130’s power
connector on the back of the unit.

| 10
5 Plug the power cord into a surge-protected AC outlet.
CAUTION: To prevent overheating, and thus voiding your
warranty, do not place anything on or over the thin client.