dellonda DG114 User manual

Model No. DG114
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance.
DG114 Issue:2 13/05/21
www.dellonda.co.uk
Galvanised Steel Garden/Outdoor/
Storage Shed 1.51 x 1.51 x 2m Pent
Roof, Green

About the Product
Galvanized steel panels easily assembled to form rigid and secure structure, Doors are secured by cross bolt and eyelet which will accept a padlock
(not included) for additional security. All models are supplied with bolt down xing kits.
• SPECIFICATION
• Model no: .......................................... DG114
• Width: ............................................. 1510mm
• Depth: ............................................. 1510mm
• Height: .......................................... 2000*mm
• Roof type: .............................................. Pent
* Denotes minimum wall height
Safety Instructions
• WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when building this shed.
• Keep children and unauthorised persons away from the working area
• DO NOT use the shed for any purpose other than that for which it is designed.
• Use appropriate safety clothing including eye protection.
• NOTE: The assembly of this product will require assistance.
• DO NOT attempt assembly in windy conditions.
Tools required
• Drill, measuring tape, cross head screwdriver, rivet gun, rubber mallet, sturdy ladder, adjustable spanner, 2 saw horses, 3mm steel drill
bit, 9mm masonry drill bit.
Important Information
Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care
for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these
instructions safe for future use.
1
www.dellonda.co.uk
Refer to
instruction
manual
Wear protective
gloves
Wear safety
footwear
Wear eye
protection

2
www.dellonda.co.uk
1. ASSEMBLY

      
  





  

  
 

 


www.dellonda.co.uk 3

www.dellonda.co.uk 4

www.dellonda.co.uk 5

www.dellonda.co.uk 6

www.dellonda.co.uk 7

www.dellonda.co.uk 8

www.dellonda.co.uk 9

www.dellonda.co.uk 10

www.dellonda.co.uk 11

www.dellonda.co.uk 12

www.dellonda.co.uk 13

www.dellonda.co.uk 14

www.dellonda.co.uk 15
WHITEP L
ASTIC
STOPPER
WHIT
EP LASTIC STOPPER
FIXW ITH3 .0*10MMR IVET
Step 6: Assemble the front door (continued)
Turn door over with bracing aligned with holes (make sure the ridges of the door are facing up) and fix the bracing with the provided 3.0 x
10mm rivets through the front of the panel. Then turn door over and insert plastic stoppers at the ends of braces as shown below.
Note: Fix rivets
through the front panel
with ridges facing up.
FIX WITH 3.0MM RIVETS
WHITE PLASTIC STOPPER
WHITE PLASTIC
STOPPER
ROOF TOP EDGE RIDGES FACING UP
RIDGES FACING DOWN

www.dellonda.co.uk 16

www.dellonda.co.uk 17

www.dellonda.co.uk 18
GardenShed 1.5 x 1.5 x 2.1m
Now fit the bolt down kit as per the diagram. Strengthen the mid wall braces by applying part 72 (mid wall brace bracket) to
each corner if necessary.
WALL SHEE
T
BOLT & NUT
SLAB
STEELA NGLE
SLEEVEA NCHORB OLT
DOOR
72
DOOR
BOLT & NUT
STEEL ANGLE
WALL SHEET
SLEEVE ANCHOR BOLT

www.dellonda.co.uk 19
Apply channel safety cover (L type) to part 31 (channel) and channel safety cover (R type) to part 33R (channel). Also apply the
self-tapper covers to screw ends visible in the walls on the inside of the shed as per the diagram below.
33R
31
L
L
R
R