DELONGTOP LFP48200 Mounting instructions

Shenzhen Delong Energy Technology Co.,Ltd
深圳德隆能源有限公司
Address: 9098,DongBian Business Building, MinZhi Road 369, MinZhi Street,Longhua New District, Shenzhen city, Guangdong Province,China
TEL: +86 755 21012989 FAX: +86 755 33815254
1
Lithium-Iron Phosphate Battery
User Operation Manual
Product Name:Lifepo4 Battery Pack
Model:LFP48200 Wall mounted

Shenzhen Delong Energy Technology Co.,Ltd
深圳德隆能源有限公司
Address: 9098,DongBian Business Building, MinZhi Road 369, MinZhi Street,Longhua New District, Shenzhen city, Guangdong Province,China
TEL: +86 755 21012989 FAX: +86 755 33815254
2
WARNING
Quality Statement
Proper use and maintenance will ensure that the battery (or battery system) will operate
reliably and consistently for a long period of time.
△After receiving the product, please check if the packaging is in good condition. If the packaging
is broken, there may be damage to the product. If there is damage, please contact us.
△Anyone who does not use or maintain the battery according to this owner's manual, gives up
any right to warranty.
This battery is to be installed and serviced only by qualied personnel equipped with
appropriate personal protective equipment and following safe electrical work practices.
Always wear eye protection, gloves, apron and mask when working with batteries. Also
remove any metal / conductive jewelry.
Precautions When Working With Batteries
△Use caution to eliminate the risk of dropping a metal tool on the battery. It could spark or short
circuit the battery or other electrical parts and could cause an explosion.
△Insulated tools are strongly recommended anytime you are working around batteries.
△Never smoke or allow a spark or flame near the batteries.
△Ensure that someone is within range of your voice or close enough to come to your aid when
you are working near a battery.
△Wear complete eye / face protection and gloves. Avoid touching your eyes while
working near batteries.
△If you need to disconnect the battery, always remove the negative terminal from the battery
first. Make sure all accessories are turned off so you don’t cause a spark.
△Never use or combine this battery with another dissimilar battery.
△Batteries are temperature sensitive. For optimum performance, they should be installed in a
stable temperature environment.
△Always recycle old batteries. Contact your local recycling center for proper disposal
information.
△Contact your suppler or qualitied the battery installer befre wirng in parallel or series
Precautions When Working With Batteries
△Use caution to eliminate the risk of dropping a metal tool on the battery. It could spark or short
circuit the battery or other electrical parts and could cause an explosion.
△Insulated tools are strongly recommended anytime you are working around batteries.
△Never smoke or allow a spark or flame near the batteries.
△Ensure that someone is within range of your voice or close enough to come to your aid when
you are working near a battery.
△Wear complete eye / face protection and gloves. Avoid touching your eyes while
working near batteries.
△If you need to disconnect the battery, always remove the negative terminal from the battery
first. Make sure all accessories are turned off so you don’t cause a spark.

Shenzhen Delong Energy Technology Co.,Ltd
深圳德隆能源有限公司
Address: 9098,DongBian Business Building, MinZhi Road 369, MinZhi Street,Longhua New District, Shenzhen city, Guangdong Province,China
TEL: +86 755 21012989 FAX: +86 755 33815254
3
△Never use or combine this battery with another dissimilar battery.
△Batteries are temperature sensitive. For optimum performance, they should be installed in a
stable temperature environment.
△Always recycle old batteries. Contact your local recycling center for proper disposal
information.
△Contact your supplier or qualitied the battery installer before wirng in parallel or series
1. Introduction
Lithium iron phosphate battery is one of new energy storage products developed and
produced by manufacture, it can be used to support reliable power for various types
of equipment and systems. DL-51200 is especially suitable for application scene of
high power, limited installation space, and restricted load-bearing and long cycle life.
DL-51200 has built-in BMS battery management system, which can manage and
monitor cells information including voltage, current and temperature. What’s more,
BMS can balance cells charging and discharging to extend cycle life. Multiple
batteries can connected in parallel to expand capacity and power in parallel for larger
capacity and longer power supporting duration requirements.
1.1 Features:
The whole module is non-toxic, non-polluting and environmentally friendly;
Cathode material is made from LiFePO4 with safety performance and long cycle
life;
Battery management system (BMS)has protection functions including
over-discharge, over-charge, over-current and high/low temperature;
The system can automatically manage charge and discharge state and balance
current and voltage of each cell;
Flexible configuration, multiple battery modules can be in parallel for expanding
capacity and power.
Adopted self-cooling mode rapidly reduced system entire noise;
The module has less self-discharge, up to 6 months without charging in on shelf; no
memory effect, excellent performance of shallow charge and discharge;
Working temperature range is from (Charging 0~55 ℃; discharging -20~55 ℃)
with excellent discharge performance and cycle life;
Small size and light weight, standard of embedded designed module is
comfortable for installation and maintenance;

Shenzhen Delong Energy Technology Co.,Ltd
深圳德隆能源有限公司
Address: 9098,DongBian Business Building, MinZhi Road 369, MinZhi Street,Longhua New District, Shenzhen city, Guangdong Province,China
TEL: +86 755 21012989 FAX: +86 755 33815254
4
1.2 Specifications
Model
LFP48200
Nominal Capacity
200Ah
Nominal Voltage
51.2V
Energy
10KWH
Self discharge
<3% per month
Energy efficiency
> 98%
Cycle Life
4000~6000 , 25℃
Lifespan
10 years
Internal Resistance
≤100mΩ
Standard Charge
End of charge Voltage
58.8V
Max.Continuous charge current
100A
Recommended charge current
40 A
Charge Method
0.2C (0.5A) CC/CV
Standard Discharge
End of discharge Voltage
40V
Max Continuous Discharge Current
200A
Max. Pluse Discharge Current
400A/5S
Environment
Working Temperature ℃
-20~55℃
Recommended Storage temperature
-10~45℃
Casing material
Metal case/ wall type
Dimensions
L*W*H 730*145*465mm
Terminal Type
M8 or customized
Weight
≤80kg
1.3 Interfacing

Shenzhen Delong Energy Technology Co.,Ltd
深圳德隆能源有限公司
Address: 9098,DongBian Business Building, MinZhi Road 369, MinZhi Street,Longhua New District, Shenzhen city, Guangdong Province,China
TEL: +86 755 21012989 FAX: +86 755 33815254
5
Switch
Power : to turn ON/OFF the whole battery BMS standby.
Display:
to show the batteries information
ON/OFF
ON/OFF Light: Constantly on after the boot, off after the extinguish
Run:
Run light: to show the Power Switch is ON, and the BMS has electricity (No power).
ALARM
Alarm light: Battery failure status indicator light, red for failure, green for normal.
Battery indicator
Battery Capacity: Power display, six indicator lights show the current power.
CAN
CAN Communication Terminal: (RJ45 port) follow CAN protocol, for output batteries
information.
RS232
R232 Communication Terminal: (RJ11 port) follow RS232 protocol, for output batteries
information.
RS485
R485 communication terminal : (RJ45 interface) using RS485 protocol, output battery
information, can also be used for multi-group lithium battery parallel communication.
Power Terminals(P+, P-)
Power cable terminals: for connecting to equipment and paralleling to other battery module for
Table of contents
Other DELONGTOP Camera Accessories manuals
Popular Camera Accessories manuals by other brands

Trojan
Trojan GC2 48V quick start guide

Calumet
Calumet 7100 Series CK7114 operating instructions

Ropox
Ropox 4Single Series User manual and installation instructions

Cambo
Cambo Wide DS Digital Series Main operating instructions

Samsung
Samsung SHG-120 Specification sheet

Ryobi
Ryobi BPL-1820 Owner's operating manual