Deluxe Comfort RM-1001 User manual

User
User
User
User manual
manual
manual
manual

INSTRUCTION MANUAL
LCD
LCD
LCD
LCD DISPLAY
DISPLAY
DISPLAY
DISPLAY
CONTROL
CONTROL
CONTROL
CONTROL PANEL
PANEL
PANEL
PANEL
SPEED
CALORIE
DISTANCE
TIMER
MODE
MAIN
POWER
SWITCH
MODE
REVERS
E
DECREASE
TIME SETTING
INCREASE TIME
SETTING
INCREASE SPEED SETTING
DECREASE SPEED SETTING

1. Main Power Switch (ON/OFF)
The red-colored main power switch is located at the bottom of the controller. When th e button
is pushed to “ 0 ” position, the power will be disconnected . To switch on the unit, just push the
button to “ - ” position and its red indicator light will turn on.
2. Function keys Description
Power When the main power switch is turned on, press “ Power ” button once and
the LCD display will be turned on . A ll function keys are now ready to use.
Mode This function key is use to select for operati o n modes . 5 operation
modes are available for choices (0 to 5).
Mode 0: Manual operation ; time, speed and direction can be set
according to individual ’ s preference.
Mode 1: Auto operation(km/h) with a speed change of 3-4-3-4-3-4 .
Mode 2: Auto operation(km/h) with a speed change of 3-4-5-4-3-5
Mode 3: Auto operation(km/h) with a speed change of 3-4-5-6-5-4
Mode 4: Auto operation(km/h) with a speed change of 4-5-6-5-4-3
Mode 5: Auto operation(km/h) with a speed change of 4-3-4-5-6-5
Speed Mode 0: Manual operation. Press “ + ” or “ - ” to adjust speed levels of 3km/h,
4km/h, 5km/h or 6km/h .
Time Mode 0: Manual operation. Press “ + ” or “ - ” to adjust its running time of
3min, 6min, 9min or 12 min .
Reverse When the unit is turned on and running in any operation mode, press
“ reverse ” button once to change the motor rotating direction.
3. Auto-Protection Function
When the unit is running abnormally due to sudden break down of the motor or human error,
the power will automatically cut off after 10 seconds to protect its motor and other electronic
components.
Notes:
�When the unit is not in used, it will turn off automatically after 60 seconds. To restart the
unit, just press the “ Power ” button once to switch it on again.
Warning:
When using the unit, the legs and arms must be fully relaxed so that proper physical exercise
can be carry out on the legs and arms. Do not stop exercise by external force or perform
r everse- direction exercise that can harm the legs and arms.
ASSEMBLING

Notice:
1). Please kindly note that you need to tighten the head screw ( D ) & Anti-slip screw ( G )
tightly with the tool ( F ).
2). Please do match the Foot with the Crank as the picture showed, that means the Left Foot
needs to be fixed to the Crank on the left side of the product, it is the same for the right one.