Timer - Set the desired auto on/off and cooking time and left idle for 5secs to starts counting down.
*Timer function is available for selected cooking methods only.
Sliding Control –Sliding panel with red power indicator light. “+” and “-” button to adjust the time and temperature
Pause/Resume –To pause the heating process. Press again to resume.
COOKING MODES
Stew: default power: 100W, default timer: 2 hours, panel display: “2:00”
Soup: default power: 2100W, default timer: 2 hours, panel display: “2:00”
Steam: default power: 2100W, default timer: 30minutes, panel display: “0:30”
Boil: default power: 2100W, default timer: 15minutes, panel display: “0:15”
Slow Cook: default power: 1600W, default timer: 1 hour, panel display: “1:00”
Fry: default power: 1400W, default timer: 1 hour, panel display: “1:00”
Hotpot: default power: 2100W, default timer: 2 hours, panel display: “2:00”
Stir Fry: default power: 2100W, default timer: 30 minutes, panel display: “0:30”
Cleaning and Maintenance
1. Do not unplug or switch off the mains power while the cooker is still operating. Press the ‘On/Off’ key to
switch off the cooker and wait for the fan to stop spinning before unplug.
2. Please clean the cooker regularly and after every use to prevent spillage from becoming burnt onto the
surface Clean the cooker with a damp cloth and, if necessary, with some mild cleaning agent. Never use
scouring pads, abrasive cleaning agents or aggressive liquids to clean the cooker.
Caution : DO NOT rinse the induction cooker under tap to avoid damage
Recommended Types and Sizes of Cookware
For best cooking experience, please use the type of cookware as recommended below.
Stainless Steel Pots, Enamelled Steel Utensils, Iron Kettles, Enamelled Stainless Steel Kettles, Iron Frying Pans, Iron
Pans/Flat Base Karahis, Iron Pans
For other cookware that is not included, please refer to the requirements below before using:
1. Material : cookware with a bottom made of iron or magnetic stainless steel
2. Shape: cookware with a flat bottom
3. Size: Cookware with a bottom diameter of 12-20cm
4. Weight: Cookware with a weight of up to 6kgs (Including contents)
Toubleshooting
1. The ON/OFF button does not respond
There is a connection problem .Check if the induction cooker is connected to the mains and if the plugs is inserted
firmly into the wall socket.
2. The cookware does not heat up to the required temperature
The bottom of the cookware may not be flat or the material is not suitable. If problem persists, please contact DeMarco
service center.
3. The appliance stops working suddenly
The temperature of the cookware might be too high or the induction cooker auto protecting program is activated. Let
the cookware cool down for a while.
4. Error Code E0 to E7
Please contact DeMarco service center.