KitchenAid KECC501G User manual

'i e and Care Guide
A Note to You ............................... 2
Cooktop Safety ........................... 3
Getting to Know
Your Cooktop ............................... 5
Using Your Cooktop .................... 9
Using the surface units ................ 9
Using the cooktop ........................
Cookware tips ............................. 13
Characteristics of
cookware materials .................... 14
Caring for Your Cooktop .......... 15
Cleaning the cooktop
and control panel ........................ 15
Cleaning the control knobs ........ 15
How to keep your cooktop
looking like new .......................... 16
Troubleshooting ........................ 18
Requesting Assistance
or Service ................................... 19
Warranty ..................................... 22
For assistance or service in the U.S.A.,
call the Customer Interaction Center.
Forassistanceor service
in Canada, see page 20.
Jlodels: KECC501G KECC502G YKECC502G KECC507G
YKECCS07G KECCS08G YKECCS08G KECC562G
KECC567G YKECC567G KECC568G YKECC568G
KECC051 H KECC507H KECC563H KECC567H

iNote toYou
Because your life is getting busier and more complicated, KitchenAid appliances are
easy to use, save time, and help you manage your home better. To ensure that you
enjoy many years of trouble-free operation, we developed this Use and Care Guide.
It contains valuable information concerning how to operate and maintain your new
appliance properly. Please read it carefully. Also, please complete and mail the
enclosed Product Registration Card.
_/henever you call our Customer Interaction
;enter at 1-800-422-1230 (in Canada,
-800-461-5681 ) or request service for your
ippliance, you need to know your complete
nodel number and serial number. You can
ind this information on the model and serial
lumber plate (see diagrams for location of
_late).
Please also record the purchase
_formation.
Model Number
Serial Number
Purchase/
Installation Date
Builder/Dealer
Name
Address
Phone
4OTE: You must provide proof of purchase
_rinstallation date for in-warranty service.
[eep this book and the sales slip together for future reference.

Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and
others.
All safety messages will follow the safety alert symbol and either the word
"DANGER" or "WARNING." These words mean:
You can be killed or seriously injured if you
don't immediately follow instructions.
You can be killed or seriously injured if you
don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of
fire, electrical shock, injury to persons, or
damage when using the cooktop, follow
basic precautions, including the following:
•CAUTION: Do not store items of
interest to children in cabinets above
a cooktop - Children climbing on
the cooktop to reach items could be
seriously injured.
• Proper Installation - Be sure your cook-
top is properly installed and grounded
by a qualified technician.
• Never Use Your Cooktop for Warming
or Heating the Room.
• Do Not Leave Children Alone - Children
should not be left alone or unattended
in area where cooktop is in use. They
should never be allowed to sit or stand
on any part of the cooktop.
• Wear Proper Apparel - Loose-fitting
or hanging garments should never
be worn while using the cooktop.
• User Servicing -Do not repair or
replace any part of the cooktop
unless specifically recommended in
the manual. All other servicing should
be referred to a qualified technician.
• Storage on Cooktop - Flammable
materials should not be stored near
surface units.
• Do Not Use Water on Grease Fires -
Smother fire or flame or use dry
chemical or foam-type extinguisher.
• Use Only Dry Potholders - Moist or
damp potholders on hot surfaces may
result in burns from steam. Do not let
potholder touch hot heating elements.
Do not use a towel or other bulky cloth.
SAVE THESE INSTRUCTIONS
continued on next oaae

OOktOp 5atety
IMPORTANT SAFETY INSTRUCTIONS
• DO NOT TOUCH SURFACE UNITS
OR AREAS NEAR UNITS - Surface
units may be hot even though they are
dark in color. Areas near surface units
may become hot enough to cause
burns. During and after use, do not
touch, or let clothing or other flammable
materials contact surface units or areas
near units until they have had sufficient
time to cool. Among those areas are
the cooktop and surfaces facing the
cooktop.
• Use Proper Pan Size - This cooktop is
equipped with one or more surface units
of different size. Select utensils having
flat bottoms large enough to cover the
surface unit heating element. The use
of undersized utensils will expose a
portion of the heating element to direct
contact and may result in ignition of
clothing. Proper relationship of utensil
to burner will also improve efficiency.
• Never Leave Surface Units Unattended
at High Heat Settings - Boilover causes
smoking and greasy spillovers that
may ignite.
• Glazed Cooking Utensils - Only certain
types of glass, glass/ceramic, ceramic,
earthenware, or other glazed utensils
are suitable for cooktop service without
breaking due to the sudden change in
temperature.
• Utensil Handles Should Be Turned
Inward and Not Extend Over Adjacent
Surface Units - To reduce the risk of
burns, ignition of flammable materials,
and spillage due to unintentional
contact with the utensil, the handle of
a utensil should be positioned so that it
is turned inward, and does not extend
over adjacent surface units.
• Do Not Cook on Broken Cooktop -
If cooktop should break, cleaning
solutions and spillovers may penetrate
the broken cooktop and create a risk
of electric shock. Contact a qualified
technician immediately.
• Clean Cooktop With Caution - If a
wet sponge or cloth is used to wipe
spills on a hot cooking area, be careful
to avoid steam burn. Some cleaners
can produce noxious fumes if applied
to a hot surface.
For units with ventilating hood -
• Clean Ventilating Hoods Frequently-
Grease should not be allowed to
accumulate on hood or filter.
• When flaming foods under the hood,
turn the fan on.
SAVE THESE INSTRUCTIONS
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor
of California to publish a list of substances known to the State of California to cause
cancer, birth defects, or other reproductive harm, and requires businesses to warn of
potential exposure to such substances.
WARNING: This product contains a chemical known to the State of California to cause
cancer, birth defects, or other reproductive harm.
This appliance can cause low-level exposure to some of the substances listed,
including benzene, formaldehyde, carbon monoxide, and toluene.

to Know Your
Cooktop
his section contains captioned illustrations of your cooktop. Use it to become familiar with
le location and appearance of all parts and features. Following are models with control
nobs and dual-size and halogen surface units.
W' Models
I(ECCS62G, I(ECCS67G, YI(ECCS67G, and I(ECCS67H)
;ontrol panel
Left rear Center rear Right rear Dual-size Ceramic
control control control surface units cooktop
knob knob knob (p. 10) (pp. 9-12)
Left front Power on
control light
knob
Right
front
control
knob
Model and serial Control
number plate panel
(on bottom of (pp. 5, 9-12)
burner box)
(Model KECCS67H shown below)
Dual-size Ceramic
surface units cooktop
(p. 10) (pp. 9-12, 14-16)
Stainless steel
frame
(pp. 15, 17)
Model and serial Control
number plate panel
(on bottom of (pp. 5, 9-11)
burner box)
Note for Models KECC567G, YKECC567G, and
KECC567H:
Right front and left rear surface units are halogen.

::etting to KnOw Your Cool(top
KECC563H)
"ontrol panel
Center rear
Left rear control knob Right rear
control (Warming control
knob element) knob
Dual-size
surface units
(p. 10/
Ceramic
cooktop
(pp. 9-12)
i il i
Left front Power on Right front
control knob light control knob
Model and serial Warming
number plate element
(on bottom of (p. 12)
burner box)
Control
panel
(pp. 6, 9-10, 12)
;0" Modets
KECC501 G, KECCSO2G, YKECC502G,
',ECCSOTG, YKECC507G, and KECC507N)
;onffoi panel
Left rear Right rear
control control
knob knob
DuaJ-size
surface units
(p. lO)
Ceramic
cooktop
(pp. 9-12)
Left front Power on
control light
knob
front
control
knob
Model and serial number
plate (on bottom of
burner box)
Control panel
(pp. 6, 9-10)

7etting to KnOw Your Cool(top
(Model KECCSO7H shown below)
Dual-size Ceramic
surface units cooktop
(p. 10) (pp. 9-12)
Stainless steel
frame ...................
(pp. 15, 17)
Model and serial number Control
plate (on bottom of panel
burner box) (pp. 6, 9-10)
Note for Models KECC507G and YKECC507G:
Right front and left rear surface units are halogen.
Note for Model KECC501G:
This model does not have dual-size surface units.
15" Model
KECC051H)
;ontrol panel
Rear control
knob
Hot
surface
lights
located in
the lobe
of each
surface
unit marker
?i
S
Front Power on
control light
knob
Ceramic
cooktop
(pp. 9-12)
f
7
Model and serial Control
number plate panel
(on bottom of burner (pp. 7, 9)
box)

_ettJng to Know Your Cooktop
;hown below are models with electronic touch controls and dual-size surface units.
W' Models
KECCS68e, YKECCS68e)
ouch Control panel
Left rear Center rear Right rear Dual-size Ceramic
touch touch touch surface unit cooktop
control control control (p. 10) (pp. 9-12)
Left front ALL OFF/ Right
touch Control Lock front
control touch
control
;0" Models
KECCS08G, YKECCS08G)
ouch Control panel
Model and serial
number plate
(on bottom of
burner box)
Control
panel
(pp. 8, 9)
Left rear Right rear
touch touch
control control
t
j_
Left front ALL OFF/
touch Control Lock
control
Dual-size
surface unit
(p. 10) J
Right
touch
control Model and serial
number plate
(on bottom of burner
box)
Ceramic
cooktop
(pp. 9-12)
!
Control
panel
(pp. 8, 9)

• Your Cooktop
his section tells you how to operate the controls on the cooktop. It also discusses how the
eramic glass cooktop works, and includes tips on how to cook with and maintain the cooktop.
To choose a power level other than HI, from
the HI setting, touch and hold, or tap, the
arrow pointing to HI and the power level will
decrease. Stop when you reach the desired
level. Follow the same procedure from LO to
increase the power level.
To turn heating elements off individually,
touch ON/OFE To turn all elements off at
once, touch ALL OFE
Fire Hazard
Turn off all controls when done
cooking.
Failure to do so can result in death
or fire.
Surface unit
........Control
..................knob
iiii!i!iiiiiii,_
Control knobs (Models KECC50 IG,
(ECC502G, YKECC502G, KECC507G,
/KECC507G, KECC562G, KECC567G,
(KECC567G, KECC051H, KECC507H,
(ECC563H, KECC567H)
_ush in control knobs before turning them to
setting. Set them anywhere between HI and
_)FE
.:lectronictouch controls (Models
(ECC508G, YKECC508G, KECC568G,
(KECC568G)
touch ON/OFF to turn heating elements on.
I-heLO and HI lights will blink on and off,
ndicating a choice of high or low power. To
-hoose high power, touch the arrow pointing to
-I1.To choose low power, touch the arrow
NOTE: Heating elements will be visible (glow)
only at or above power levels 7 or 8.
To lock controls, touch CONTROL LOCK
and hold for 5 seconds. A tone will sound and
the lock light will go on. To unlock, repeat
above and lock light will go off.
Models KECC508G, YKECC508G,
KECC568G and YKECC568G are equipped
with a control cooling fan. The fan operates
when the cooktop is in use. The fan may
continue to run for a short period of time after
the cooktop is turned off.
Surface unit markers (All Models)
The shape and location of the Surface Unit
Markers match the shape and location of
the surface units that the control knob or
the touch control operates.
Power on light
Models KECC501G, KECC502G,
YKECC502G, KECC507G, YKECC507G,
KECC562G, KECC567G, YKECC567G,
KECC051H, KECC507H, KECC563H,
KECC567H :These models have a separate
Power On Light.
Models KECCS08G, YKECCS08G,
KECCS68G, YKECCS68G: These
electronic touch control models have a
common Power On Light. Power levels
LO through HI also act as Power On
Indicator Lights.

i:ii,'sing Your COOktOp
-lot surface indicator lights
I-he Hot Surface Indicator Lights in the lobe
tt each control will glow when the surface
Jnits get hot. The Indicator Lights will
-ontinue to glow as long as the surface
Jnits are too hot to touch, even after they
_returned off.
Jntil you get used to the settings, use the
OIIowing as a guide. For best results, start
•ooking at the high setting; then turn the
•ontrol knob down to continue cooking.
SETTING RECOMMENDED USE
HI • To start food cooking.
• To bring liquid to a boil.
MED-HI or 6-8 • To hold a rapid boil.
• To quickly brown or
sear meat.
MED or 5• To maintain a slow boil.
• To fry poultry or meat.
• To make pudding,
sauce, or gravy.
MED-LO or 2-4 • To stew or steam food.
• To simmer food.
LO • To keep food warm.
Set the heat higher or
lower within the LO
(or 1) band to keep
food at the
temperature you want.
• To maintain liquid just
below simmer.
• To melt chocolate or
butter.
I
REMEMBER: When cooktop is in use, the entire cook- I
top area may become hot. I
Using the dual-size surface unit
KECCS68G, YKECCS68G, KECCS08G,
YKECCS08G, KECCS02G, YKECCS02G,
KECCS07G, YKECCS07G, KECCS62e,
KECC567G, YKECC567G, KECCS07H,
KECCS63H and KECCS67H
You can use the right rear and left front
surface units as either small diameter, lower
wattage elements or large diameter, full
wattage elements.
Use both elements
for larger pans
Use small element
for smaller pans
Right rear surface unit:
Use both elements
for larger pans
Use inner element
for smaller
Left front surface unit:
To use the small or inner element
(for smaller pans):
• Push in and turn the control knob to the
left (counterclockwise) to the desired
setting in the area marked "SINGLE".
To use both elements (for larger pans):
•Push in and turn the control knob to the
right (clockwise) to the desired setting in
the area marked "DUAL".
NOTE: You can turn the control knob in
either direction to reach "OFF".

i:ii,'sing Your Cool(top
Jsing the dual size surface unit
Models KECC508G, YKECC508G,
[ECC568G, YKECC568G)
_oucan use the left front surface unit as
_ithera small diameter, lower wattage
_lement (center inner ring) for smaller pans
_ras a large diameter, full wattage element
entire element to outer ring) for larger pans.
Ise both elements
or larger pans
Jse inner element
or small pans
"o use the small or inner element:
Touch SINGLE ON/OFE The HI and LO
lights will blink on and off indicating a
choice of either HI or LO power selection.
Touch the arrow pointing to HI for high
power.
Touch the arrow pointing to LO for low
power.
"ouse both elements:
, Touch DUAL ON/OFF and proceed the
same as for SINGLE ON/OFF.
, To turn the entire element on, touch
DUAL ON/OFF. The HI and LO lights will
blink on and off indicating a choice of
either HI or LO power selection.
, Touch the arrow pointing to HI for high
power.
, Touch the arrow pointing to LO for low
power.
_OTE: You may switch between SINGLE
ind DUAL element operation at any time an
_lement is in operation simply by touching
}INGLE or DUAL.
Using the ceramic glass cooktop
Halogen element (Models KECC507G,
YKECC507G, KECC567G, YKECC567G and
KECC567H)
The right front and left rear surface units
feature halogen elements. These elements
light up as soon as you turn them on and are
brighter than regular coil elements.
Cooking on the ceramic glass cooktop is
similar to cooking on coil elements. There are,
however, a few differences:
• The surface cooking area will glow red
when the element is turned on. You will see
the element cycling on and off - even on the
HI setting - to help the area stay at the
temperature setting you chose.
• Do not cook foods directly on the cooktop.
• Do not cook popcorn that comes in
prepackaged aluminum containers on the
cooktop. The container could leave
aluminum marks on the cooktop that
cannot be removed completely.
• Make sure the bottoms of pots and pans
are clean and dry before using them. Food
and water particles left on the bottoms can
leave deposits on the cooktop when it is
heated.
• Lift pots and pans onto and off of the
cooktop. Sliding pots and pans on the cook-
top could leave marks that are difficult to
remove or could leave permanent marks.
• Dropping a heavy or hard object on the
cooktop could crack it. Be careful when using
heavy skillets and large pots. Do not store
jars or cans above the cooktop.
• Do not use the cooktop as a cutting board.
• Do not allow anything that could melt, such
as plastic, to come in contact with the cook-
top while it is hot.

;sing Your Cooktop
Sugary spills and soils can cause pitting,
See "Cleaning the cooktop and control
panel" in the "Caring for Your Cooktop"
section for more information.
•Wiping off the cooktop before and after
each use will help keep the surface free from
stains and give you the most even heating,
See "Cleaning the cooktop and control
panel" in the "Caring for Your Cooktop"
section for care and cleaning suggestions.
Food Poisoning Hazard
Do not let food sit for more than
one hour before or after cooking.
Doing so can result in food poisoning
or sickness.
Ising the Warming element
Model KECC563H)
Jsethe Warming element to keep cooked
_ods warm, It is not recommended for
eating cold foods. Choose the LO
etting for heat-sensitive and smaller
luantities of food, Choose the HI setting for
quids and larger quantities of food, Adjust
s needed,
bset the Warming element:
• Push in and turn the control knob to the
desired setting from LO to HI for different
levels of heating.
:.Turn the knob to OFF when finished, The
Keep Warm element will remain warm
until the surface indicator light on the
cooktop goes off,
Cover all foods with a lid. Do not use plas-
tic wrap to cover food because it may melt
onto the cooktop surface. When warming
baked goods, allow a small opening in the
cover for moisture to escape,
Use only cookware and dishes
recommended for oven and cooktop use,
Use potholders or oven mitts to remove
food,
• The Warming element will not glow red
when it is on, unlike the surface elements.
However, the surface indicator light on the
cooktop will glow.
• The Warming element may be used
whether the other elements are in use or
not.
• The quality of the food may deteriorate if it
is kept on the Warming element for an
extended period of time,
Warming element
control knob
Warming element

;i,i!sing Your Cooldop
tome canning information
ICe°_...... ;........................ Pan
I I Surface
..................................................................................unit
Use the entire surface ("DUAL" setting)
of the left front surface cooking area for
best results. (Models KECC502G,
YKECC502G, KECC507G, YKECC507G,
KECC508G, YKECC508G, KECC562G,
KECC567G, YKECC567G, KECC568G,
YKECC568G, KECC507H, KECC563H,
and KECC567H)
Use flat-bottomed canners on all types
of cooktops, especially ceramic glass.
Canners with rippled or ridged bottoms do
not allow good contact with the surface.
Center the canner over the largest
surface cooking area. Do not extend more
than one inch outside the surface cooking
area. Large diameter canners/pans, if not
centered correctly, trap heat and can
cause damage to the cooktop.
Do not place your canner on two surface
cooking areas at the same time.
• The type of material the canner is made
of determines the length of heating time.
Refer to the "Characteristics of cookware
materials" chart later in this section for
more information.
• When canning for long periods of time,
allow elements and the surrounding
surfaces to cool down.
• Alternate use of the surface cooking
areas between batches or prepare small
batches at a time.
• Start with hot water, cover with a lid,
and bring to a boil; then reduce heat to
maintain a boil or required pressure levels
in a pressure canner.
• For up-to-date information on canning,
contact your local U.S. Government
Agricultural Department Extension Office
or companies who manufacture home
canning products, tn Canada, contact
Agriculture Canada.
Select a pan that is about the same size
as the surface cooking area. Cookware
should not extend more than 1 inch
(2.5 cm) outside the area.
For best results and greater energy
efficiency, use only flat-bottomed
cookware that makes good contact with
the surface cooking area. Cookware with
rounded, warped, ribbed (such as some
porcelain enamelware), or dented bottoms
could cause uneven heating and poor
cooking results.
Cookware designed with slightly indented
bottoms or small expansion channels can
be used.
Cookware with non-stick finish has
heating characteristics of the base material.
• Check for rough spots on the bottom of
metal or glass cookware which will scratch
the ceramic glass surface.
• Use flat bottom cookware for best heat
conduction from the surface cooking area
to the cookware. Determine flatness with
the ruler test. Place the edge of a ruler
across the bottom of the cookware. Hold it
up to the light. No light should be visible
under the ruler. Rotate the ruler in all
directions and look for any light.
•Do not leave empty cookware, or
cookware that has boiled dry, on a hot
surface cooking area. The cookware
could overheat, causing damage to the
cookware or the surface cooking area.

;sing Your Cooktop
,,CCii, !" iii '' iC:ii;ii' , iiiiij:!i! !iii ii iCiiiii! iiiil;
he pan material affects how fast heat transfers from the surface cooking area through the pan
_aterialand how evenly heat spreads over the pan bottom. Choose pans that provide the
est cooking results.
Aluminum • Heats quickly and evenly.
• Use for all types of cooking.
• Medium or heavy thickness is best for most cooking.
• Used as a core or base in cookware to provide even heating.
Cast iron • Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Can be coated with porcelain enamel.
Ceramic or • Heats slowly and unevenly.
ceramic glass • Use on low to medium settings.
• Follow manufacturer's instructions.
Copper • Heats very quickly and evenly.
• Used as a core or base in cookware to provide even heating.
Earthenware • Can be used for cooktop cooking if recommended by the
manufacturer.
• Use on low settings.
#orcelain enamel-on-steel • See cast iron and stainless steel.
3r enamel-on-cast iron
Stainless steel • Heats quickly but unevenly.
• A core or base of aluminum or copper on the cookware
provides even heating.
• Can be coated with porcelain enamel.

faring for YourCooktop
his cooktop is designed for easy care.
owever, ceramic glass cooktops need
be maintained differently than standard
lectric coil elements. Foods spilled directly
n the cooktop will not burn off as on coil
lements. Because of this, the surface should
e dust-free and soil-free before heating.
The Cooktop Polishing Creme included
,ith your cooktop, paper towels or a sponge
all you need to clean your cooktop. For
roper cleaning methods, please review the
-low to keep your cooktop looking like new"
hart. Follow this chart after each use to en-
ure top performance and to preserve that
niquely elegant look.
NOTE: Let cooktop cool before cleaning.
• Activate control lock on electronic touch
control models (see page 8).
NOTE: (Note applies to models KECC507H
and KECC567H only.) Do not use Cooktop
Polishing Creme on the stainless steel
frame when cleaning. The polish will scratch
the stainless steel surface. If residual polish
should get on the stainless steel surface
during cleaning, wipe off with a damp cloth.
• Make sure all control knobs are turned to
OFF.
• Pull the control knobs straight off. Do not
remove seals under knobs. They keep
moisture and soil out of cooktop.
•Wash control knobs with sponge and
warm, soapy water. Rinse well and dry
with a soft cloth. Do not soak.
• Replace control knobs by pushing them
firmly into place. Make sure all knobs
point to OFF.
OTE: When cleaning, never use steel
'ool, abrasives, or commercial oven
eaners, which may damage the finish.

aring tor Your Cool(top
........ ¸¸¸¸¸¸ iiiiiiii!iii "i!!iiiiililiiiiiiiiii<i
(our cooktop is designed for easy care. Foods spilled directly on the cooktop will not burn
)ff as on open-coil elements. Because of this, you should keep the surface dust free and
_oilfree before heating. Use the Cooktop Polishing Creme, included with your range, to
-lean and maintain the cooktop.
PART WHAT TO USE HOW TO CLEAN
Ceramic glass DO NOT use steel wool, plastic cleaning
cooktop pads, abrasive powdered cleansers,
chlorine bleach, rust remover, ammonia,
or glass cleaners with ammonia. They
may damage the cooktop surface.
Light to • Paper towel Wipe as soon as Hot Surface Indicator
moderate soil • Clean, damp sponge Light goes off. Rinse thoroughly and dry.
Heavy soil, dark • Cooktop Polishing Rub into soil using damp paper towel.
streaks, specks, Cremet Rinse and dry.
and discoloration • Nonabrasive cleanser
Burned-on soils • Cooktop Polishing Rub creme into soil using paper towel.
Cremet Reapply creme to remaining spots. Hold
• Razor scraper in a razor scraper as flat to surface as
holder possible, scrape spots. Polish entire
cooktop with creme and paper towel.
Rinse and dry. Store razor blades out
of reach of children.
...... ................................................................................................................................................................wipe whiie Ceramic giaSs surface is............................................
(jellies, candy • Clean, damp sponge warm. Rinse thoroughly and dry.
syrups)
Metal marks from • Cooktop Polishing Before heating cooktop again, rub into
copper, aluminum Cremet area using damp paper towel. Rinse
.......pan,......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Tiny scratches or • Cooktop Polishing To prevent scratches and abrasions,
abrasions Cremet use the Cooktop Polishing Creme
regularly. Scratches and abrasions
do not affect cooking performance.
After many cleanings, they will become
less visible.
Nhen the cooktop is cool, remove all spills and clean. Food spills containing acids, such as
4negar and tomato, may effect finish.
'Toorder additional Cooktop Polishing Creme call 1-800-422-1230 (in U.S.A.) or
-800-807-6777 (in Canada). You will hear a recording. Follow the steps to place an order.

aring for Your Cooktop
........iiiOW _ii'Oiii,_,i::i_i,!i!!ii_iii!!_,iii_i:::iiiii_'_,_"_;ii:::i::i_,,,,,'i!iii!ii¸¸_COO!iiiqiiiiiiii'Oiiiii::i::;::_,_,iiiOO!iii_,_,i_:iiiiiiii!iii_"i!!iiiiiiiiiiii!iii_iiii_ii!ii!ii__!'_"!,_ili:i!;_W
PART WHAT TO USE HOW TO CLEAN
Stainless steel • DO NOT use steel wool or soap-
surfaces
(Models KECC507H
and KECC567H
Routine cleaning
and fingerprints • Liquid detergent/soap
and water, or
all-purpose cleaner
• Stainless Steel
Cleaner and Polish
Stubborn stains and
baked-on residue
filled scouring pads.
• Rub in the direction of the grain
line to avoid marring the surface.
• Always wipe dry to avoid water
marks.
• If commercial cleaners are used,
follow label directions, tf product
contains chlorine (bleach), wipe
thoroughly with clean water and dry
with a soft lint-free cloth. Chlorine
is a corrosive substance.
• Wipe with damp cloth or sponge,
then wipe with clean water and dry.
• To avoid marring the surface, rub in
the direction of grain lines with a
damp cloth or sponge and cleanser.
Wipe thoroughly with clean water.
Repeat if necessary.
• Swab or wipe with cloth. Wipe with
clean water and dry.
IOTE: Always wipe your cooktop with clean water and dry it well after using the cleanser
o prevent streaking or staining.

"ou can solve many common cooktop problems easily, saving you the cost of a possible
ervice call. Try the suggestions below to see if you can solve your problem without outside
elp. If the suggestions do not work, see "Requesting Assistance or Service" on page 19
n the U.S.A.), or on page 20 (in Canada).
PROBLEM POSSIBLE CAUSE SOLUTION
Nothing will The unit is not wired into See installation instructions for elec-
operate a live circuit with proper trical requirements.
voltage.
A household fuse has blown Replace household fuse or reset
or a circuit breaker has circuit breaker.
tripped.
The surface A household fuse has blown Replace household fuse or reset
cooking areas or a circuit breaker has circuit breaker.
will not operate tripped.
You are not setting the control Push control knobs in before turning
knobs correctly, to a setting.
Control knob(s) You are not pushing in before Push control knob(s) in before turning
will not turn turning, to a setting.
Touch controls You are not following the See Electronic touch controls in the
will not respond correct sequence to operate "Using Your Cooktop" section.
the electronic touch control.
You are not touching the
electronic control in the
correct location.
Cooking
results are
not what
you expected
The cooktop is not level.
The pan used is not the
correct type or size.
Cookware does not fit
the surface cooking area
being used.
Level cooktop. (See Installation
Instructions.)
Refer to a reliable cookbook for
recommended pan type and size.
Pan should be the same size or
slightly larger than surface cooking
area being used.

Service Assistance or
lefore calling for assistance or service, please check the "Troubleshooting Guide" section. It
lay save you the cost of a service call. If you still need help, follow these instructions.
Call the KitchenAid Customer Interaction
_enter toll free:
1-800-422-1230.
Our consultants are
available to assist you.
When calling:
Please know the purchase date, and the
complete model and serial number of your
appliance (see the "A Note to You" section).
This information will help us to better
respond to your request.
Our consultants provide assistance with:
•Features and specifications on our full line
of appliances.
• Installation information.
• Accessory and repair parts sales.
• Specialized customer assistance
(Spanish speaking, hearing impaired,
limited vision, etc.).
• Referrals to local dealers, service
companies, and repair parts distributors.
KitchenAid designated service
technicians are trained to fulfill the
product warranty and provide after-
warranty service, anywhere in the
United States.
To locate the KitchenAid designated
service company in your area, you can
also look in your telephone directory
Yellow Pages.
If you need to order replacement parts,
we recommend that you only use factory
specified parts. These parts will fit right
and work right, because they are made
with the same precision used to build
every new KITCHENAID ®appliance. To
locate factory specified replacement parts
in your area, call our Customer Interaction
Center telephone number or your nearest
KitchenAid designated service center.
If you need further assistance, you can
write to KitchenAid with any questions or
concerns at:
KitchenAid Brand Home Appliances
Customer Interaction Center
c/o Correspondence Dept.
MD 8020
553 Benson Road
Benton Harbor, MI 49022-2400
Please include a daytime phone number in
your correspondence.

i equesting Assistance or Service
Call the KitchenAid Canada Customer
Interaction Center toll free:
8:30 a.m. - 5:30 p.m. (EST) at
1-800-461-5681. Our consult-
ants are available to assist
you.
When calling:
Please know the purchase date, and the
complete model and serial number of your
appliance (see the "A Note to You" section).
This information will help us to better
respond to your request.
Our consultants provide assistance with:
• Features and specifications on our full line
of appliances.
• Accessory and repair parts sales.
• Specialized customer assistance
(French speaking, hearing impaired,
limited vision, etc.).
• Referrals to local dealers, service
companies, and repair parts distributors.
KitchenAid designated service
technicians are trained to fulfill the
product warranty and provide after-
warranty service, anywhere in Canada.
To locate the KitchenAid designated
service company in your area, you can
also look in your telephone directory
Yellow Pages.
Contact Inglis Limited Appliance Service from anywhere in Canada at 1-800-807-6777.
If you need to order replacement parts,
we recommend that you only use factory
specified parts. These parts will fit right
and work right, because they are made
with the same precision used to build
every new KITCHENAID _ appliance. To
locate factory specified replacement parts
in your area, call our Customer Interaction
Center telephone number or your nearest
KitchenAid designated service center.
If you need further assistance, you can
write to KitchenAid with any questions or
concerns at:
Customer Interaction Center
KitchenAid Canada
1901 Minnesota Court
Mississauga, Ontario L5N3A7
Please include a daytime phone number in
your correspondence.