Denon DN-333XAB User manual

User Guide English ( 3 – 8 )
Guía del usuario Español ( 9 – 14 )
Guide d’utilisation Français ( 15 – 20 )
Guida per l’uso Italiano ( 21 – 26 )
Benutzerhandbuch Deutsch ( 27 – 32 )
A
ppendix English ( 33 )
DENON
PROFESSIONAL
DN-333XAB

3
User Guide (English)
Introduction
The Bluetooth®-enabled DN-333XAB professional audio equipment forms the heart of a
complete commercial audio system by mixing and amplifying Wireless (Bluetooth),
microphone, and line input sources.
Perfect for driving in-ceiling or wall-mounted speaker systems, the DN-333XAB features 120
watts of built-in Class D amplification at ultra-low distortion for exceptional clarity. Dedicated
mixing controls for three XLR+1/4-inch combination microphone inputs, two pairs of stereo
line-level RCA jack inputs, and a front-panel 1/8-inch (3.5 mm) auxiliary input gives users the
ability to create a seamless blend of audio from a plethora of source types. A front-panel
Bluetooth pairing control with LED status indicator provides a fast and simple wireless
connection to smartphones and tablets. A quick-responding limiter eliminates the negative
audible effects of excessively high input signals from microphones or playback material.
The DN-333XAB output section offers detachable Euroblock 70V and 100V outputs with a 4Ω
transformer bypass output, as well as Chime, Alarm, and Mic 1 Priority mic facilities. The
compact 2RU unit fits neatly with other rack-mounted equipment for an integrated system
appearance, or may sit on a shelf via the attached rubberized feet.
Please see this guide’s Setup chapter to learn how to integrate DN-333XAB with your audio
system, and then refer to the Operation chapter to start using DN-333XAB.
Box Contents
DN-333XAB
Power Cable
Rack Ear
Rack Ear Screws (6)
Euroblock Connectors (3)
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denonpro.com.
DENON
PROFESSIONAL

4
Features
Front Panel
1
2
3
6
78
910 10 10 11 11 12 13 14
45
1. Power Switch: Use this switch to power DN-333XAB on or off. Make sure all Level knobs
are set to “MIN” before powering it on.
2. Power Light: This light will turn on when DN-333XAB is powered on.
3. Signal Light: This light will turn on when an audio signal is sent through any of the
outputs.
4. Peak Light: This light will turn on when an audio signal that is sent to the outputs is very
high. If this light turns on frequently, or the sound is distorted, reduce the volume level of
your sound source, or lower the setting of the Speaker Level knob.
5. Limiter Light: This light will turn on when a high-level audio signal triggers the built-in
limiter. The incoming signal will be reduced to help prevent damage to any connected
speakers. If this light turns on, reduce the volume level of your sound source, or lower the
setting of the Speaker Level knob.
6. Bluetooth Light: This light indicates DN-333XAB’s current Bluetooth status:
•Off: Not paired to a Bluetooth device.
•Flashing quickly: Searching for a Bluetooth device (Pairing Mode).
•Lit solidly: Paired to a Bluetooth device.
7. BT Pair: Press and hold this button for 3 seconds to un-pair DN-333XAB from a currently
paired Bluetooth device (if any). When the Bluetooth Light is off, press and hold this
button for 3 seconds once more to enter Pairing Mode; DN-333XAB will search for a
nearby Bluetooth device. See Operation > Bluetooth Pairing to learn more.
8. Aux Input: Connect an audio device to this input using a standard 1/8” (3.5mm)
stereo/TRS cable. Turn the BT/Aux In Level knob to control its volume.
9. BT/Aux In Level: Turn this knob to control the volume level of either a connected
Bluetooth device or an audio device connected to the Aux Input. If DN-333XAB is
connected to a Bluetooth device, the aux input will be disabled.
10. Mic In Level: Turn these knobs to control the volume level of any microphones connected
to the mic inputs on the rear panel.
11. Line In Level: Turn these knobs to control the volume level of any audio devices
connected to the line inputs on the rear panel.
12. Speaker Bass: Turn this knob to control the level of the low (bass) frequencies sent from
DN-333XAB’s Speaker Out.
13. Speaker Treble: Turn this knob to control the level of the high (treble) frequencies sent
from DN-333XAB’s Speaker Out.
14. Speaker Level: Turn this knob to control the volume level of the audio signal sent to
DN-333XAB’s Speaker Out.
DENON
,.,,FE66/IIIIIAL
0 0
DENON - - - DN·333XAB
0 0 0
-•• 010 0 010010 0 0J il ~
0
=------- • ·· -· -· ·· -· ·· -· - ·. -0
•••
L_____J L_____J

5
Rear Panel
1. Power Input: Use the included power cable to connect this input to a power outlet. Make
sure DN-333XAB’s power switch is set to “off” when connecting or disconnecting the
cable.
2. Bluetooth Antenna: The antenna receives and transmits the Bluetooth signal from a
paired Bluetooth device. DN-333XAB has a range of up to 100 feet (30.5 meters).
3. Alarm On: This sends DN-333XAB’s alarm tone to your external speakers (to alert guests
to an emergency situation). See Setup for more information.
4. Chime On: This sends DN-333XAB’s chime tone to your external speakers (as a “pre-
announcement” before paging). See Setup for more information.
5. Mic 1 Priority: This sends DN-333XAB’s Mic Input 1 signal to your external speakers
(muting the sound from the other inputs). See Setup for more information.
6. Speaker Out: These outputs send the main/master signal from DN-333XAB to your
external speakers. Connect these outputs to your speakers using a properly wired 4-pin
Euroblock connector and speaker wire. The power of each output is less than 120 W
(without distortion). Use only one output at a time. See Setup for more information.
7. Mic Inputs: Connect microphones to these inputs using standard XLR or 1/4” (6.3mm)
TRS cables. Turn the Mic In Level knobs on the front panel to control their volume levels.
8. Phantom +15V: Press this button to activate or deactivate +15V phantom power for any
microphones connected to the mic inputs. When activated, the light above the button will
turn on.
Note: Dynamic microphones usually do not require phantom power, while condenser
microphones usually do. Consult your microphone’s documentation to find out whether it
needs phantom power. Deactivate phantom power if your microphones do not require it.
9. Line Inputs: Connect line-level audio devices to these inputs using standard stereo RCA
cables. Turn the Line In Level knobs on the front panel to control their volume levels.
10. Aux Out: Connect an external speaker or mixer to these outputs using standard stereo
RCA cables. When an audio device is connected to the aux input on the front panel, its
signal will be sent to these outputs. Turn the BT/Aux In Level knob on the front panel to
control its volume level.
MIC1
PRIORITY
CHIME
ON
ALARM
ON
PRIORITY
1
2
345
677 78
9
10
DENON
0
1· □
0
DENON
<I II
~ar
~-~~ I» ,--.
7, ••. , , ~ ~ 1
0 -0

6
PRIORITY
MIC1
PRIORITY
CHIME
ON
ALARM
ON
Setup
Getting Started:
1. Connect any microphones to the mic inputs or line-level devices to the line inputs.
2. Connect your speakers to the Speaker Out using a properly wired 4-pin Euroblock
connector and speaker wire. The power of each output is less than 120 W (without
distortion). Use only one output at a time.
3. Make sure all Level knobs are set to “MIN”.
4. Connect the included power cable from the power input to a power outlet; power on
DN-333XAB.
5. Adjust the individual channel Level knobs and the Speaker Level knob to get a strong
signal without distortion or “clipping”.
6. Adjust the Speaker Treble and Speaker Bass knobs to further control the frequencies of
the sound.
Using a Euroblock Connector (see the side graphic):
1. Twist the speaker wire to form a tight strand and
insert this into the appropriate port, (following the
indication located above the pins on DN-333XAB)
pushing the wire until it is secured inside.
2. Attach the Euroblock connector to the input terminal
on DN-333XAB.
3. To disconnect a wire, use a small screwdriver to
press in the spring above the insert port while pulling
out the wire.
Items not listed under Introduction > Box Contents are sold separately.
Power Speaker Bluetooth
Device
Microphone
MIC 1
PRIORITY
DENON
,.,,FE66/IIIIIAL

7
Operation
Bluetooth Pairing
You can play audio from an audio device that sends its signal over a Bluetooth connection (e.g.,
smartphones, tablet computers, etc.). DN-333XAB has a range of up to 100 feet (30.5 meters).
Once you “pair” your Bluetooth device with DN-333XAB, they are “connected” wirelessly. You can
play audio on your Bluetooth device, and it will be sent out of DN-333XAB’s outputs.
Important:
•DN-333XAB will not receive audio from a phone call. While using it, we recommend disabling
your cellular connection, if possible.
•Do not use DN-333XAB near a microwave oven, which can interfere with the reception.
•While DN-333XAB is paired with a Bluetooth device, other Bluetooth devices cannot pair to it.
You must unpair (“disconnect”) the current Bluetooth device from DN-333XAB to make it
available to others.
To pair your Bluetooth device to DN-333XAB:
1. If DN-333XAB is off, use the included power cable to connect its power input to your power
source.
2. Make sure your desired Bluetooth device has its Bluetooth connectivity on and is within range.
DN-333XAB will automatically try to pair with the last-paired Bluetooth device, if any.
If you are using that Bluetooth device again, you can start playing audio immediately.
If you want to use a different Bluetooth device, continue to Step 3.
3. Press and hold DN-333XAB’s BT Pair button for 3seconds. When the Bluetooth Light starts
flashing quickly, release the BT Pair button.
4. On your Bluetooth device, enter its Bluetooth settings menu, and select DN-333XAB.
Note: (Some older Bluetooth devices may require you to enter a PIN. If this is the case, enter
0000 as the PIN.)
5. On your Bluetooth device, start playing audio.
To adjust your volume level, we recommend setting the volume control of each of your devices
in the following order:
i. your Bluetooth device
ii. DN-333XAB, using its BT/AUX IN Level knob
iii. DN-333XAB, using its Speaker Level knob
iv. your mixer, if any (its input channel level[s], then its main output level)
v. your loudspeakers
Set each volume level as high as possible without creating distortion or any “clipping” of the
sound.
Important: DN-333XAB will not receive audio from a phone call. While using it, we recommend
disabling your cellular connection, if possible.
To unpair your Bluetooth device from DN-333XAB, do one of the following:
•Enter your Bluetooth device’s Bluetooth settings menu, and disconnect from DN-333XAB.
•Or alternatively, press and hold DN-333XAB’s Pair button for 3seconds, and then release it.
DN-333XAB will unpair from your Bluetooth device and be available to pair to another one.
DENON

8
Troubleshooting
If you encounter a problem, try doing these things first:
•Make sure all cables and other connected devices are properly and securely connected.
•Make sure you are using DN-333XAB as described in this User Guide.
•Make sure your other devices or media are working properly.
•If you believe DN-333XAB is not working properly, check the following table for your
problem and solution.
Problem: Solution: Please see:
Power does not turn on. Make sure DN-333XAB’s power input
is properly connected to a power outlet
using the included power cable.
Setup
DN-333XAB does not
produce any sound, or
the sound is distorted.
Make sure all cable and device
connections are secure and correct.
Make sure none of the cables are
damaged.
Make sure the volume settings on your
Bluetooth device, loudspeaker, mixer,
etc. are correct.
Setup
Audio from my Bluetooth
device does not play
through DN-333XAB.
Make sure you have properly paired
your Bluetooth device.
Improve the Bluetooth signal reception
by moving your Bluetooth device
closer to DN-333XAB. Also, remove
obstacles (walls, furniture, etc.) so
there is a clear line of sight between
your Bluetooth device and DN-
333XAB.
Setup and Operation
Pairing my Bluetooth
device to DN-333XAB
requires a PIN.
Enter 0000 as the PIN. (Some older
Bluetooth devices may require you to
enter a PIN.)
Operation
DENON
PRDFE$6IDNAL

33
Appendix (English)
Technical Specifications
Inputs Mic In (3 XLR-TRS connectors), Line In (2 RCA connectors), Aux In
(1/8” connector), Bluetooth 3.0 reception
Outputs Aux Out (RCA connector), Speaker Output (Euroblock connector),
Tone Output (Euroblock connector)
Frequency Response Line: 60 Hz – 20 kHz (-3 dB)
Mic: 120 Hz – 20 kHz (-3 dB)
S/N Ratio >90dB
THD <0.1%
Power Amplifier 120W (RMS) Class D
Aux Output Level 0 dBV
Speaker Euroblock Output 4 Ω, 70V Line, 100V Line
Bluetooth Specifications Version: 3.0
Supported Bluetooth Profiles: A2DP
Maximum Transmission Power: Class 3, +4 dBm
Transmission Frequency: 2.4 GHz
Transmission Range: Up to 100 feet / 30.5 meters
Receiver Sensitivity: < -70 dBm @ 0.1% BER
Supported Profiles: A2DP
Power Connection: Standard IEC (switching power supply)
Input Voltage: 100-240V AC, 50/60Hz
Dimensions
(width x depth x height)
19” x 8.25” x 3.75”
48.3 cm x 21 cm x 9.5 cm
Weight 12.85 lbs.
5.8 kg
Specifications are subject to change without notice.
Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the
product in the center of the room so it is unobstructed by walls, furniture, etc.
Trademarks and Licenses
Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries.
Denon Professional products produced by inMusic Brands, Inc.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by inMusic Brands is under license.
All other product names, company names, trademarks, or trade names are those of their respective owners.
DENON
- -
- -
- -
--
- -

denonpro.com
Manual Version 1.4

DENON
PROFESSIONAL
Important Safety Instructions English (3 - 7)
and Warranty Information
lnstrucciones importantes de seguridad Espanol (8 -11 )
e informaci6n de la garantfa
Instructions importantes de securite et Fran9ais ( 12 -15 )
informations de garantie
lstruzioni importanti di sicurezza e Italiano ( 16-19)
le informazioni della garanzia
Wichtige Sicherheitsanweisungen Deutsch ( 20 -23 )
und Garantieinformationen

DENON Product Warranty (U.S.A.)
PROFESSIONAL
1. What is covered and for how long?
All Products: inMusic Brands, Inc. ("inMusic') warrants to the original purchaser that Denon Professional
("Denon Pro") products and all other accessories are free from defects in material and workmanship under
normal use and service for the period commencing upon the date of purchase from an authorized Denon Pro
dealer and continuing forthe following period of time afterthat datefor one (1) year. inMusic warrants factory-
refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from
the original date ofretail sale. This refurbished merchandise warranty is nottransferable.
2. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser.
This Limited Warranty does notcover:
• Damage caused by improper installation or improperconnection to any peripheral
• Damage caused by an external electrical fault
• Damage from use of parts not manufactured or sold by Denon Pro
• Product purchased from anyone otherthan a Denon Pro authorized dealer
• Modifications to product notapproved in writing by Denon Pro
• Equipmentthathas the serial numberremoved or made illegible
• Normal cosmetic and mechanical wear
• Damage or loss during transit to an Authorized Denon Pro Repair Center
• Unitsthat are purchased and/orlocated outside of the continental USA
3. What are inMusic's obligations? During the applicable warranty period, Denon Pro will repair or replace, at
Denon Pro's sole option, without charge to the purchaser, any defective component part of the product. To
obtain service under this Limited Warranty, purchaser must first contact Denon Pro and obtain a return
authorization number ("RA#"). Purchaser must then return the product to Denon Pro in an adequate container
for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of
purchase, the serial number of the product, and the seller's name and address. To obta in an RA# and
assistance on where to return the product, contact Denon Pro customer service at 401-658-5766. Upon
receipt, Denon Pro will repair or replace the defective products. Denon Pro may, at Denon Pro's sole option,
use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with
a rebuilt, reconditioned, new or comparable product. Repaired products will be warranted for a period equal
to the remainder of the original Limited Warranty on the original product or for90 days, whichever is longer. All
replaced parts, components, boards, and equipment become the property of Denon Pro. If Denon Pro
determines that any product is not covered by this Limited Warranty, purchaser must pay all parts, shipping,
and laborcharges for the repair or return of such product.
4. What are the limits on inMusic's liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY,
TOGETHER WITH ANY IMPLIED WARRANTIES COVERING DENON PRO PRODUCTS, INCLUDING
WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, INMUSIC OR DENON PRO SHALL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO
PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE,
MISUSE OR INABILITY TO USE ANY DENON PRO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE,
INCLUDING BUT NOT LIMITED TO INMUSIC'S OR DENON PRO 'S OWN NEGLIGENCE, EVEN IF INMUSIC,
DENON PRO, OR THEIR AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY . THIS LIMITED WARRANTY IS THE COMPLETE
WARRANTY FOR DENON PRO PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF
THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF
THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED
TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of product failure between purchaser and Denon Pro, and Denon Pro 's
product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of Denon Pro are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on Denon Pro or inMusic. Accordingly, additional
statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by
Denon Pro or inMusic and should notbe relied upon.
5. How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOTAPPLY TO PURCHASER.
This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to
another.
3

DENON Product Warranty (Non-U.S.A.)
PROFESSIONAL
1. inMusic Brands, Inc. ("inMusic") warrants to the original purchaser that Denon Professional ("Denon
Pro") products are free from defects in material and workmanship under normal use and service for
the period commencing upon the date of purchase from an authorized Denon Pro dealer and
continuing forthe following period of time afterthat date for (1) Year.
2. This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect,
unusual physical or electrical stress, modification of any part of the product, or cosmetic damage; {b)
equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other
externally exposed parts that are scratched or damaged due to normal use; (d) defects or damage
from impropertesting, operation, maintenance, installation, adjustment, orservice of the products.
3. During the applicable warranty period, Denon Pro will repair or replace, at Denon Pro's sole discretion,
without charge to the purchaser, any defective component part of the product. Denon Pro may, at
Denon Pro's sole discretion, use rebuilt, reconditioned, or new parts or components when repairing
any product or replace a product with a rebuilt, reconditioned, new or comparable product.
4. THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED
WARRANTIES COVERING DENON PRO PRODUCTS, INCLUDING WITHOUT LIMITATION ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, INMUSIC OR DENON PRO SHALL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES
TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE
USE, MISUSE OR INABILITY TO USE ANY DENON PRO PRODUCT, BREACH OF WARRANTY, OR
NEGLIGENCE, INCLUDING BUT NOT LIMITED TO INMUSIC'S OR DENON PRO'S OWN
NEGLIGENCE, EVEN IF INMUSIC, DENON PRO, OR ITS AGENTS HAVE BEEN ADVISED OF SUCH
DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS
LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR DENON PRO'S PRODUCTS, AND IS
GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of product failure between purchaser and Denon Pro, and Denon Pro's
product pricing reflects this allocation of risk and the limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and dealers of Denon Pro are not authorized to make
modifications to this Limited Warranty, or make additional warranties binding on Denon Pro or inMusic.
Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do
not constitute warranties by Denon Pro or inMusic and should not be relied upon. Some jurisdictions do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which vary under local laws.
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the
dealer from whom you purchased the unit. Retain this information and your original purchase receipt for
your records. Go to ourwebsite denonpro.com to register your product with us.
Model: ________________ Purchased From: ______ _____ _
Serial Number: _____________ Date of Purchase: ___________ _
4

Return Information
• A Return Authorization number must be obtained from your local Denon Professional Representative.
For your representative go to denonpro.com.
• A copy of the original sales receipt must also be included for the equipment to be repaired under
warranty.
• Thefaulty equipment must be packed in its original packaging.
• One additional outer layer of packaging must be included to ensure product safety. Fallures to do so
may inadequately protect the equipment in transit and, therefore, jeopardizethe customer's warranty.
• Denon Professional will not accept COD shipments and no call tags will be issued for merchandise
return.
• Denon Professional will not return repaired merchandise to customers by priority service, unless by
written request at the customer's cost. Requests must be submitted in writing with merchandise
returned.
• The defective Denon Professional equipment should be sent, freight prepaid with the Return
Authorization number clearly printed on the outer packaging and original sales receipt enclosed to
your local service center.
Very Important
Please read this section before connecting this unit to your system:
For optimum performance:
• All the slide faders are subject to wear. Excessive force can wear out the fader quickly. User
replaceable slide faders are not a warranted item.
• Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this wi ll
void your warranty. In normal use slide controls can last for many years. If they malfunction (usually
because of a dirty or dustyenvironment) consult a professional technician.
• Always make sure that AC power is off while making any connections.
• Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 32 feet /
1O meters) Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or
intermittents that could easily damage your speakers. Make the input and output connections with
readily available low-capacitance stereo cables. Quality cable makes a big difference in audio fidelity
and punch. See your Denon Professional dealer or an electronics or audio specialist store if you are
not sure which cables to use.
• Never attempt to make any adjustments other than those described in this manual, or repairs. Take
the unit to yourdealer or to an authorized Denon Professional Service Center.
• Always remember: turn amps on last and off first. Begin with master faders or volume controls on
minimum and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the
volume. This preventstransients which may cause severe speaker damage.
• Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage
equipment due to amplifierclipping.
• Avoid amplifier "clipping" at all costs: this occurs when the red LEDs (usually on the front panel of
most professional power amplifiers) start flashing. "Clipping" is when the power amplifier is distorting
and working beyond its limits. Amplifier distortion is the majorcause of speakerfailure.
• To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer,
soda, glasses of water or anything wet near or on top of the unit!
• Headphone outputs can be set to levels which can cause damage to your ears. Use caution.
• This unit may contain a microcomputer for signal processing and control functions. In very rare
situations, severe interference, noise from an external source, or static electricity may cause it to
lockup. In the unlikely event that this should happen, turn off the unit, wait at least five seconds, and
then turn it back on again.
• Underrare circumstances, if this product is exposed to electromagnetic interference during use, there
may be a slight drop in signal-to-noise ratio.
• Intended electromagnetic environments: residential, commercial, light industrial, urban outdoors.
5

Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all Instructions.
Do not usethis apparatus nearwater.
Clean only with dry cloth.
Do not blockanyventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachmenVaccessories specified by the manufacturer.
Useonly thecart, stand, tripod, bracket or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the carVapparatus
combination to avoid injury from tip-over.
Unplug this apparatusduring lightning stonns or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate nonnally, or hasbeen dropped.
Power Sources: This product should be connected to a power supply only of the type
described in these operating instructions, or as marked on the unit.
Internal/External Voltage Selectors: Internal or external voltage selector switches, if any, should only be reset and re-
equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this
yourself.
Water and Moisture: This product should be kept away from direct contact with liquids. The apparatus shall not be
exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
Protective earthing terminal: The apparatus should be connected to a mains socket outlet with a protective
earthing connection.
• Finland (Suomi): Laite on liitettava suojamaadoituskoskettimillavarustettuun pistorasiaan.
• Norway(Norge): Apparatet mll tilkoples jordet stikkontakt.
• Sweden (Sverige): Apparaten skall anslutastill jordat uttag.
This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical earth. .
Do not install this equipment in a confined or 'boxed-in' space such as a bookcase or similar unit, and maintain good
ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as
newspaper, tablecloths, curtains, etc.
This apparatus is for professional use only.
When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to
damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has
been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by
the manufacturer.
Warning: Excessivesound pressure (high volumes) from headphones can cause hearing loss.
Warning: Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom
enclosure or rearpanel before installing or operating the product.
Service Instructions
•
• Disconnect power
cord before servicing.
Replace critical components ~ only with factory parts or recommended equivalents.
• For AC line powered units -Before returning repaired
unit to user, use an ohmmeter to measure from both AC plug
blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms.
Safety Notices
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNELONLY.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the user to the presence of un-insulated 'dangerous voltage• within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
6 &
SA 1965

INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing) instructions in the
literature accompanying this appliance.
WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or
moisture. Electrical equipment should NEVER be kept or stored in damp environments.
SA 1966
CAUTION (for USA &Canadian models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
NOTICE CONCERNING LASER PRODUCTS: DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR
ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
FC
FCC Caution:
1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
2. This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna ortransmitter.
3. Changes or modifications to this unit not expressly approved by the party responsible tor.
compliance could void the user authority to operate the equipment.
IMPORTANT NOTE (For Portable Device Configuration): Federal Communication Commission (FCC) Radiation
Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in
ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures
specified in OET Bulletin 65 Supplement C.
ESD/EFT Warning: This unit may contain a microcomputer for signal processing and control
functions. In very rare situations, severe interference, noise from an external source, or static
electricity may cause it to lockup. In the unlikely event that this should happen, turn off the unit, wait
at least five seconds, and then turn it back on again. The pins of connectors identified with this ESD
warning symbol should not be touched.
In an environment with radio frequency interference, the unit may malfunction and resume normal operation after
removal of the interference.
For best audio quality, avoid using this device in a high RF-radiated environment.
This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio
interference regulations of the Canadian Department of Communications.
For 240-volt use in U.K., use NEMA-style 240-volt plug. For other countries use proper plug for local outlet.
Double Insulated: When servicing, use only identical replacement parts.
Correct Disposal of This Product: This marking indicates that this product should not be disposed A
with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They. can take this product for
environmentally safe recycling.
Disposing of General Purpose and Alkaline Batteries:
• Alkaline batteries can be safely disposed of with normal household waste. Never dispose of batteries in fire
because they could explode.
• Alkaline batteries are composed primarily of commo,:i metals-steel, zinc, and manganese-and do not pose
a health or environmental risk during normal use or disposal.
• It is important not to dispose of large amounts of alkaline batteries in a group. Used batteries are often not
completely "dead." Grouping used batteries together can bring these "live" batteries into contact with one
another, creating safety risks.
• Proven cost-effective and environmentally safe recycling processes are not yet universally available for
alkaline batteries. Some communities offer recycling or collection of alkaline batteries. Contact your local
government for disposal practices in your area. 7

World Headquarters: inMusic Brands, Inc.
200 Scenic View Drive
Cumberland, RI 02864
USA
Tel: [phone]
Fax: [phone]
U.K. Office: inMusic Europe, Ltd.
Unit 3, Nexus Park
Lysons Avenue
Ash Vale
HAMPSHIRE
GU12 SOE
UNITED KINGDOM
Tel: [phone]
Fax: [phone]
German Office: inMusic GmbH
HarkortstraBe 1_2-32
40880 Ratingen
GERMANY
Tel: [phone]
Fax: [phone]
denonpro.com
Manual Version 1.0

CE
CE
CE
CE
CE
General Note on the Declaration of Conformity: We hereby declare that this device is
in accordance with the essential requirements of the European Directive 1999/5/EC. The
full EU declaration of conformity can be requested at the following address:
Observaci6n general sobre la declaraci6n de conformidad: Por el presente declaramos
que este dispositivo se encuentra en conformidad con las requisitos esenciales de la
Directiva Europea 1999/5/EC. La declaraci6n de conformidad completa de la UE se puede
solicitar a lasiguiente direcci6n:
Note generale sur la declaration de conformite : Nous declarons par la presente que
cet appareil est conforme atoutes les exigences essentielles de la Directive 1999 /5/CE
du Parlement europeen et du Conseil. Une copie du texte integral de la declaration de
conformite UE est disponible sur demande al'adressesuivante :
Nota generica in merito alla dichiarazione di conformita: Con ii presente documento
sl dichiara che ii dispositlvo econforme con i requisiti essenziali contenuti nella Direttiva
Europea 1999/5/EC. La dichiarazione completa di conformita UE puo essere richiesta al
seguente indirizzo:
AJlgemeinhinweis zur KonformitatserkUirung: Hiermit erklaren wir, daB slch dieses
Gerat in Obereinstimmung mit den grundlegenden Anforderungen der europaischen
Richtlinie 1999/5/EG befindet. Die vollstandige EG Konformitatserklarung kann unter
folgender Adresse angefordert werden:
inMusic GmbH
Harkortstr. 12 - 32
40880 Ratingen
GERMANY
inMusic GmbH
Harkortstr. 12 - 32
40880 Ratingen
ALEMANIA
inMusic GmbH
Harkortstr. 12 -32
40880 Ratingen
ALLEMAGNE
inMusic GmbH
Harkortstr. 12 - 32
40880 Ratingen
GERMANIA
inMusic GmbH
Harkortstr. 12 - 32
DE -40880 Ratingen