Denon envaya User manual

.
.
DSB50BT, DSB150BT, DSB250BT
Portable Waterproof Speaker
Owner’s Manual
Contents Preparation Connections Operation Troubleshooting Appendix
1Index

Preparation
Introduction 4
Unpacking 5
Overview 6
Sound Quality 6
Design 6
Operation 6
Features and functions 7
Attaching the Strap 9
Charging 10
Turning the power on 14
Turning the power off 14
Connections
Bluetooth operation 15
Pairing 15
Connecting 15
1: Connecting for the first time 16
2: Reconnecting paired devices 18
Simultaneously connecting multiple Bluetooth devices (Multipoint
function) 19
Envaya Link (DSB50BT) 20
Envaya Link (DSB150BT/DSB250BT) 21
Operation
Adjusting the volume 22
Listening to music using a wired connection 23
Voice Control Using Siri 24
Conducting hands-free phone calls using Envaya 25
Troubleshooting
Tips 27
Troubleshooting 28
Speaker does not turn on 28
Envaya cannot be charged 28
No sound from the speaker 29
Sound is distorted, noisy, or cuts in and out 29
Cannot pair a Bluetooth device with the speaker 30
Speaker is turning off automatically 31
Speaker is malfunctioning 31
Cannot conduct a call 31
Restarting the Envaya 32
Contents Preparation Connections Operation Troubleshooting Appendix
2Index

Appendix
Playing back a Bluetooth device 33
Precautions for Dust Resistance and Water Resistance 33
Trademark information 34
Specifications 35
DSB50BT 35
DSB150BT 37
DSB250BT 39
Index 41
Contents Preparation Connections Operation Troubleshooting Appendix
3Index

Introduction
This manual is for all three models.
For the purposes of this manual, the name “Envaya” is used to refer to the three products.
Their respective model names are used in the model-specific manuals.
.
DSB50BT (Envaya Pocket)
DSB150BT (Envaya Mini)
DSB250BT (Envaya)
Contents Preparation Connections Operation Troubleshooting Appendix
4Index

Unpacking
.
Quick Start Guide Safety Instructions USB Cable
(Micro B connector)
Strap
0USB to AC power adapter not included.
Contents Preparation Connections Operation Troubleshooting Appendix
5Index

Overview
Sound Quality
0Despite the compact size of Envaya, powerful playback sound is
produced by using neodymium magnets in the magnetic circuit
and utilizing an original surround shape in the passive radiator.
0Envaya is compatible with a wide range of codecs, including the
high sound quality Qualcomm® aptX™, AAC and SBC.
Envaya automatically selects the optimum compatible codec for
your Bluetooth device (smartphone or tablet) so you can enjoy
high-grade wireless sound.
aptX is also Low Latency compatible to minimize lag in the
picture and audio (Not supported during stereo pairing).
Design
0Envaya has a slim stick design for easy carrying.
0Envaya has a waterproof and dustproof design to keep the unit
safe if it gets wet or is exposed to dust clouds.
This allows it to be used in a wider range of areas, such as by a
pool or in dusty outdoor environments.
Operation
0Hands-free phone calls can be conducted using Envaya by
pairing with a Bluetooth-compatible mobile phone.
0If you have two Envaya units*, you can make a stereo pair
connection between them to create spatial stereo sound.
* The two units must be the same model.
* Stereo pair connection does not support aptX’s Low Latency
function.
Contents Preparation Connections Operation Troubleshooting Appendix
6Index

Features and functions
.
qw
AMicrophone
This microphone is used when conducting hands-free phone calls.
(v p. 25)
BStatus Indicator
Lit when power is on.
Lit when charging. (v p. 12)
Lit when pairing. (v p. 16)
Contents Preparation Connections Operation Troubleshooting Appendix
7Index

.
q w e r
ACall button (T)
Answers incoming calls and ends calls. (v p. 25)
BVolume adjustment buttons (–,+)
Adjusts the volume up and down. (v p. 22)
CPower button (X)
Turns the power on/off. (v p. 14)
DBluetooth button (V)
Press this to start pairing. (v p. 15)
.
qwer
AStrap loop
Attach the provided strap here.
BCap
Close this cap securely to ensure proper dustproof and waterproof
performance.
CMicro USB port
Connect Envaya to the USB to AC power adapter (not included) using
the supplied USB cable to charge this unit. (v p. 10)
DAUX Input connector
Used to connect an external audio player with an analog output.
(v p. 23)
Contents Preparation Connections Operation Troubleshooting Appendix
8Index

Attaching the Strap
The strap can be attached more easily by using the twist tie that holds it in place.
1Loop the twist tie around the strap.
.
2Pass the twist tie through the strap loop of this unit.
.
3When the loop of the strap appears on the other side,
insert both ends of the strap through the loop to secure
it in place.
.
4Tie the ends of the strap securely.
.
NOTE
0Do not spin Envaya around holding the strap, as doing so may cause injury or
damage.
Contents Preparation Connections Operation Troubleshooting Appendix
9Index

Charging
Envaya can be charged and operated on battery power. It can also be operated from an AC power source by connecting it to the USB to AC power
adapter (available commercially) using the supplied USB cable.
Please make sure you charge the battery completely before listening on battery power.
0After purchase, charge this unit before use.
DSB50BT DSB150BT DSB250BT
Operating life *1 (hours) 10 11 13
Charging time *2 (hours) 2.5 3.0 3.5
z1The playback time may differ depending on the ambient temperature, playback volume, and usage conditions.
z2If using a USB to AC power adapter with an output of 2.1A or higher.
NOTE
0Only use the supplied USB cable.
0Rating of adapter should be DC 5 V, and between 2.1 A and 2.4 A.
0Must be used with an approved adapter suitable for the countries where the requirement will be applied.
Contents Preparation Connections Operation Troubleshooting Appendix
10 Index

oCharging the speaker
AOpen the cap on the rear side.
BConnect the small end of USB cable to the speaker.
CConnect the large end of the USB cable to a USB to AC power adapter
and a power source.
NOTE
0When connecting the dedicated charging cable to the charging port, be sure to
match the cable connector with the shape of the socket. Forcing the connector into
the socket will cause damage.
0Remove the USB cable and firmly close the cap when charging is completed.
.
Contents Preparation Connections Operation Troubleshooting Appendix
11 Index

oBattery indicator
The battery indicator uses 5 LEDs to indicate the status of the charge
process when connected to the USB to AC power adapter.
.
When connected to the USB to AC power adapter (charging)
The battery indicator is always lit when charging.
The battery indicator turns off when charging is complete.
Charging status (Approximate) Status Indicator
81 - 99 %
.
61 - 80 %
.
41 - 60 %
.
21 - 40 %
.
Less than 20 %
.
Contents Preparation Connections Operation Troubleshooting Appendix
12 Index

When running on battery power
Press and release the X button to check the remaining battery. The
remaining battery level is displayed for approximately 2 seconds.
0When the battery indicator flashes on battery power, connect Envaya to the USB
to AC power adapter.
Remaining battery
(Approximate) Status Indicator
81 - 100 %
.
61 - 80 %
.
41 - 60 %
.
21 - 40 %
.
7 - 20 %
.
Less than 7 %
.
Contents Preparation Connections Operation Troubleshooting Appendix
13 Index

Turning the power on
1Press and hold X until a notification sound is heard.
The status indicator illuminates and Envaya turns on.
.
Turning the power off
1Press and hold X until a notification sound is heard.
The status indicator lights turn off and the speaker’s power is turned
off.
0Envaya automatically turns off when there is no audio output from a Bluetooth
device for approximately 15 minutes and the unit is not operated during this time.
0If the stereo mini plug cable is connected to Envaya for approximately 8 hours,
Envaya automatically turns off (AUX auto off function).
Contents Preparation Connections Operation Troubleshooting Appendix
14 Index

Bluetooth operation
You can enjoy listening to music wirelessly by connecting Envaya to your Bluetooth device.
Pairing
Pairing (registration) is an operation that is required in order to connect a
Bluetooth device to Envaya.
When using Bluetooth for the first time, you need to pair Envaya and your
Bluetooth device so they can communicate with each other.
Envaya can store pairing information for up to 8 devices.
.
NOTE
0Multiple Bluetooth devices cannot be played back at the same time.
Connecting
There are two methods for connecting with Bluetooth devices:
1Connecting for the first time (v p. 16)
2Reconnecting paired devices (v p. 18)
Contents Preparation Connections Operation Troubleshooting Appendix
15 Index

1: Connecting for the first time
1Turn on Bluetooth on your mobile device.
0For details, see the Owner’s Manual of your Bluetooth device.
.
Bluetooth
Bluetooth
CHOOSE
Denon xxx
2Press and hold X until a notification sound is heard.
The status indicator illuminates and Envaya turns on.
0Envaya automatically enters pairing mode the first time the power
is turned on after purchase. In this case, you do not need to
perform step 3.
3Press the V button.
The status indicator blinks rapidly and Envaya enters pairing mode.
.
Contents Preparation Connections Operation Troubleshooting Appendix
16 Index

4Select “Denon Envaya xxx”*1 from the list of devices
displayed on the screen of your Bluetooth device.
When pairing is complete a notification sound is heard.
.
0If you are asked to enter a pass key in the Bluetooth device screen, enter
“0000”.
NOTE
0*1：The name displayed depends on the model.
DSB50BT：Denon Envaya Pocket
DSB150BT：Denon Envaya Mini
DSB250BT：Denon Envaya
5Listening to music.
Music played back on the Bluetooth device will now play through
your Envaya speaker.
0Adjust the volume to an appropriate level.
NOTE
0Envaya remains in the pairing mode for approximately 5 minutes and then will exit
pairing mode. If your device could not connect, please try again from step 3.
0Envaya cannot pair with Bluetooth devices that require a pass key other than
“0000”.
Contents Preparation Connections Operation Troubleshooting Appendix
17 Index

2: Reconnecting paired devices
1Turn on Bluetooth on your mobile device.
0For details, see the Owner’s Manual of your Bluetooth device.
.
Bluetooth
Bluetooth
CHOOSE
Denon xxx
2Press and hold X until a notification sound is heard.
The status indicator illuminates and Envaya turns on.
0If the last device which was connected to Envaya is turned on, in
range, and has Bluetooth enabled, it automatically connects to
Envaya.
0If the stereo mini plug cable is connected to Envaya, remove the
cable to switch to the Bluetooth input.
3Select “Denon Envaya xxx”*1 from the list of devices
displayed on the screen of your Bluetooth device.
When a device is connected by Bluetooth, a notification sound is
heard.
.
NOTE
0*1：The name displayed depends on the model.
DSB50BT：Denon Envaya Pocket
DSB150BT：Denon Envaya Mini
DSB250BT：Denon Envaya
4Listening to music.
Music played back on the Bluetooth device will now play through
your Envaya speaker.
Contents Preparation Connections Operation Troubleshooting Appendix
18 Index

Simultaneously connecting multiple
Bluetooth devices (Multipoint function)
Two Bluetooth devices can be simultaneously connected to Envaya so
you can easily switch between multiple Bluetooth audio sources without
having to disconnect and reconnect each device. (“Bluetooth
operation” (v p. 15))
It is convenient to connect devices that you use frequently so that you do
not need to re-connect each time you want to switch playback devices.
Pair the devices that you want to connect in advance.
.
Audio signal
During
playback
During Bluetooth connection
oSwitching playback devices
1Stop or pause playback on the device that you are
currently listening to.
2Begin playback on the device that you want to listen to.
oDisconnecting the bluetooth connection
Disconnect the Bluetooth connection by turning off the Bluetooth function
of the Bluetooth device.
Contents Preparation Connections Operation Troubleshooting Appendix
19 Index

Envaya Link (DSB50BT)
If you have two of the same speakers, you can use them as a pair of
stereo speakers.
1Connect the first Envaya to the Bluetooth device.
2Press and hold the Bluetooth buttons simultaneously
on both Envayas for approximately 6 seconds.
NOTE
0Adjust the volume on the Bluetooth device.
0Envaya Link is disconnected when the Envaya power is turned off. You need to
reconnect Envaya Link in order to use it again.
0Envaya Link does not support aptX’s Low Latency function.
.


Contents Preparation Connections Operation Troubleshooting Appendix
20 Index