Denver Electronics IPO-1320MK2 User manual

DENVER IPO-1320MK2
DENVER IPC-1030MK2

APP Download
Please Download and install the DENVER IPC APP before you set up the
IP Camera. Search on Google Play store and APP Store for “DENVER IPC”
One Key Setting Functionality (cell phone must be connected to the WiFi. This one key setting functionality is
only available for the models IPO-1320MK2 and IPC-1030MK2)
a). Connect the camera with power adaptor (you do not need to connect the Ethernet cable).
b). Launch the APP, tap on “+” to access the “Add Camera” function, then click on “One Key
Setting”, and the screen shown below will appear:

c). Enter the correct WiFi password, then click on “Start configuration”, like shown in the screen
below:
d). Wait for 60 seconds, then choose the respective device and enter the password. If done,
click on save to connect to the WiFi.
How to connect the IP Camera
Connect the power supply cable to the IP Camera and wait for about 2 seconds until the green
indicator will light permanently. After another 10 second the yellow indicator will start flashing
and the camera will perform the IP detection automatically.
You may continue with the next step, if after another 30 seconds the camera successfully was
launched.
IP Camera
IP Camera
IP Camera
Internet
Router
PC
Internet Cable
Power
WAN
LAN

Use of the APP Functions
App Icon:
Home screen:

Part 1. Home screen
Here you are provided with the options: “Video”, “Device List”, “Multimedia”, and “Message”.
1. Video:
You may add up to four cameras to this multi-device page. Here the three functions below are
provided:
a) You may stop the video by sliding over the video thumbnail. To view the footage in full
screen mode, double click on the respective thumbnail.
b) To access the Menu, click on the icon in the upper left corner of the screen.

2. Device List:
In the device list the connected cameras are shown. Here the four functions mentioned below
are possible:
a) Click in the upper left corner of the screen on the “Edit” button to access the device settings
if you want to change or delete the parameters of one or all devices.
b) To add a new camera, click on “+” icon in the upper right corner of the screen.
c) To set or modify the settings of a device, click on the icon on the right side next to the
respective camera.
d) Click on the camera thumbnail to activate the full screen display.

3. Multimedia:
Multimedia includes the photo and video management. The three functions below are possible:
a) Click on the button to access the list of all photos and videos.
b) Click on the button to view a video remotely.
c) Click on to view the video of the recent day.

4. Message:
Message includes all alarm events recorded by the connected camera(s).
a) To view the alarm events click on the desired camera menu item.
Part 2. App Management
The App management enables you to perform individual and also contains the Help function for
the APP. The screen displays 7 options: “Flow statistics”, “Message sound”, “Network limited”,
“Skin”, “Help”, “Push”, “About”.
App management:

1. Flow statistics:
Here the network traffic used will be displayed. The traffic metrics for the mobile network and
the WiFi will be shown.
Here the three functions below are possible:
a) By moving the grey slider offer the screen the traffic statistics for the mobile network and
WiFi will be displayed.
b) By clicking the “ ” button in the upper right corner of the screen you are able to
configure limits for the mobile network and WiFi network. This setting will not affect the use
of the app, it just provides an intuitive reminder of the traffic used on the mobile and WiFi
networks.
c) By clicking the “ ” button on the bottom you may clear the traffic
statistics for the mobile and WiFi networks.

2. Message sounds:
Here you may activate/deactivate the Message alarm sounds.
3. Network Limited:
Here you may set that the video only may be opened if the cell phone is connected to a WiFi
network.