Denver DDP-700 User manual

MODELNAME
DDP-700
USER GUIDE PAGE
WHEREWHERE
WHEREWHERE
WHERE TT
TT
TO FIND ITO FIND IT
O FIND ITO FIND IT
O FIND IT a glance guide to the buttons on your handset and base,
and the messages on the handset display
Thehandset
Thehandset’sdisplay
Thebase
INSTINST
INSTINST
INSTALLAALLA
ALLAALLA
ALLATION DOTION DO
TION DOTION DO
TION DOss
ss
s ANDAND
ANDAND
AND
DONTsDONTs
DONTsDONTs
DONTs
howtoinstallyourDDP-700andthethings you will observed
usingyourDDP-700-digital cordless telephone
Unpackingyour DDP-700
Connectionandconditionforuse
Choosing a site for the Base
Radiosignalbetweenhandsetandbase
Electrical Safety
Emergency calls
Chargingthebatteries
GETTING STGETTING ST
GETTING STGETTING ST
GETTING STARAR
ARAR
ARTEDTED
TEDTED
TEDafirstglancetoknow before you operate your DDP-700
Handsetbatterychargelevel
On/Off function
Outof range warning
Standbymode
The clock (time and date)
BASIC FUNCTIONSBASIC FUNCTIONS
BASIC FUNCTIONSBASIC FUNCTIONS
BASIC FUNCTIONS
Making a call how to make and end a calls in different ways.
To make a call by Pre-dialing (external call)
To end a telephone call
Tomake a call from phonebook
To make a call from CID list (call back)
To make a call to another handset (internal call)
To make a call for Babysit
LastNumberRedial
OutgoingCallReview / Redial
To answer a call howtoreceived calls in different ways.
Earphonemode
Speakerphonemode / handsfree
During a call the things you can do during a call
Volumelevel
Microphonemute
Transferringanexternalcall / External
CallHold
Conference call
CallShuttle
SendingDTMF
Headsetmode
i
TABLE OF CONTENTS
1
2
3
4
4
4
4
5
5
5
6
6
6
6
6
8
8
8
8
9
9
9
9
10
10
10
10
10
11
11
11
11

MODELNAME
DDP-700
USER GUIDE PAGE
ii
TABLE OF CONTENTS
The phonebookhowtostore,edit,anddelete contact names and telephone
numbersinyour DDP-700 handset
Tostore nameandnumber
To edit entry
Toedit individual entry
To delete all entry
Ring Melody how to select the ringing volume level, the ring melody for
theinternal and external call for base and handset.
Handsetring volume
Handsetring melody for external call
Handsetring melody for internal call
Baseringvolume
Basering melody
RingPriority
Warning tonethiswilllet you set yourDDP-700handsettoemit beep when
youpresskey,keyconfirmation,lowbatteryandoutofrange.
Key Press
KeyConfirmation
LowBattery
OutofRange
PERSONPERSON
PERSONPERSON
PERSONALIZEDALIZED
ALIZEDALIZED
ALIZED YY
YY
YOUR SET-OUR SET-
OUR SET-OUR SET-
OUR SET-
TINGTING
TINGTING
TING
The call timer
The handset name
The keypad protect
Choose your language
Set alarm clock
Baby sitter
Caller IDhowtouse the caller ID features ofyour DDP-700
Callscreening
CIDphonebook matching
CIDreservedandunavailable
Auto talk
Unansweredcallreview
DeleteCID
your DDP-700 handset will display the elapse time on the
LCD.
topersonalizedyourindividualhandsetname.
toprotectyourDDP-700 handset from accidental dialing.
tochoose the language Italiano andEnglish.
to set your DDP-700 handset as alarm clock
useyourDDP-700handsetforBabysit
12
12
12
12
13
13
14
15
15
16
PP
PP
PAA
AA
AGINGGING
GINGGING
GING THE HANDSETTHE HANDSET
THE HANDSETTHE HANDSET
THE HANDSET
tolocatethehandset or all handset registered tot thebase,
you can make it ring by pressing the page key 17
18
18
19
19
20
21
22
22
22
23
23
24
25
25
27
28
Set the clockways to set, turn on/off your DDP-700 handset clock26

MODELNAME
DDP-700
USER GUIDE PAGE
EXPEXP
EXPEXP
EXPANDINGANDING
ANDINGANDING
ANDING YY
YY
YOUR DECTOUR DECT
OUR DECTOUR DECT
OUR DECT
SYSY
SYSY
SYSTEMSTEM
STEMSTEM
STEM
howtoregister additional handset to yourDDP-700cordless
DECTphone.
AnotherDDP-700 handset
AnotherDECTGAPcomplianthandset
Pico Cellular systemhowtoconfigure your DDP-700 tocoverlargerarea,register
additionalbasetoyourDDP-700cordlessDECTphone.
Registeranother DDP-700base
AnotherDECTGAPcompliant base
DDP-700mobility
choosingthebase
howtoconfigure your DDP-700 tocoverlargerarea,register
additionalbasetoyourDDP-700cordlessDECTphone.
Programming
ChangePINCode
Dialingmode
PABX
De-registerhandset
Defaultsetting
LCRFeature-Italy
PrimaryCode
DesiredCode
Areacode
Access Code
SpecialCode
RoutableCode
Settingthe Primary Code
Settingthe Others Code
LCR On / OFF
FactoryPreset-Routable
Factory Preset - Special Code
DialingLCR
CallBarring
ADAD
ADAD
ADVV
VV
VANCE FEAANCE FEA
ANCE FEAANCE FEA
ANCE FEATURESTURES
TURESTURES
TURES
iii
Adding new handset 29
29
30
31
31
32
32
33
33
34
35
36
37
38
38
38
38
38
40
40
41
42
44
45
47
48
49
check the points here if you encounter problem
withyour DDP-700 or not working correctly,
TROUBLESHOOTINGTROUBLESHOOTING
TROUBLESHOOTINGTROUBLESHOOTING
TROUBLESHOOTING
GUIDEGUIDE
GUIDEGUIDE
GUIDE
51
TABLE OF CONTENTS
USE IN BUSINESSUSE IN BUSINESS
USE IN BUSINESSUSE IN BUSINESS
USE IN BUSINESS DialingType
Do you need a Pause
PBX Access Code and Pause
DoyouneedRecall (Flash)
PABX storingnumberin the phonebook
50
50
50
50
50
technicalspecificationsofDDP-700
TECHNICAL DETTECHNICAL DET
TECHNICAL DETTECHNICAL DET
TECHNICAL DETAILSAILS
AILSAILS
AILS 55
easyreference forprogrammingtheDDP-700
PROGRAMMING QUICKPROGRAMMING QUICK
PROGRAMMING QUICKPROGRAMMING QUICK
PROGRAMMING QUICK
REFERENCE GUIDEREFERENCE GUIDE
REFERENCE GUIDEREFERENCE GUIDE
REFERENCE GUIDE
53

MODELNAME
DDP-700
USER GUIDE PAGE
EARPIECE
Listening
DISPLAY
ViewName,Number & Icon FLASH Recallduringacall
MUTE
Forprivate conversation during
acall
POWER OFF / OK
Turnoffhandset /Confirmation
keyduringprogrammingmode
REDIAL / PAUSE
Last number Redial / Insert fix
timeholdbetweendiallednum-
ber
CLEAR / SPEAKERPHONE
Delete last entered digit or exit
programmingmode/Speaker-
phoneduringacall
CID / MENU DOWN
Review CID / Press to scroll
menudown-decreasevolume
duringacall
MICROPHONE
Pick up voice
EARPHONESOCKET
Forhandsfreeusingheadset
PHONEBOOK
Listofname
HOLD / INT
Placethe callonholdtempo-
rary/callanotherregistered
handset
MENU / MENU UP
ForprogrammingHandset/
Press to scroll Menu up -
increasevolumeduring a call
TALK
Presstoinitiateandendacall
DIALING NUMBER
PresstodialNumberorStore
Name
CHARGE CONTACT
ChargingBatteries
The Handset
WHERE TO FIND IT
1

MODELNAME
DDP-700
USER GUIDE PAGE
ALPHANUMERIC DIS-
PLAY
DisplayLettersorNumber
NUMERIC DISPLAY
DisplayLettersorNumber
BATTERY
BatteryStrengthLevel
KEY PAD LOCK
KeyboardisnotActive
SPEAKERPHONE
HandsfreeOperation
NEW CALL (CID)
NewCallwhenflashing
ANSWERING MACHINE
NotUse
MONITOR
BabySitterorRoommonitor
RING MUTE
SilentRingforHandset
CONVERSATION MUTE
Microphonemute
CALL IN PROGRESS
ConnectedtotheTelephoneline
oranHandsettoHandsetCall
PHONEBOOK
Viewnamesandnumbers
PROGRAMMING
ProgrammingHandsetorBase
CONNECTION
ReceptionStatusbetweenhand-
setandBase
The Handset’s display
WHERE TO FIND IT
2

MODELNAME
DDP-700
USER GUIDE PAGE
The Base
NEW CALL / IN USE
INDICATOR
This indicator will flash if you
have missed a call (new call)
During an external call, it will
continuouslylight.
WHERE TO FIND IT
RING INDICATOR
When an incoming call, this in-
dicatorwilllight.
CHARGE INDICATOR
Whenyouplacethehandsetfor
charging,thisindicatorwilllight.
PAGE BUTTON
Press this key to find the hand-
set/s. Allregisteredhandsetwill
emitthepagering.
CHARGE TERMINAL
It will contact with the handset
terminalwhenplacetocradleto
chargethebattery.
TEL. LINE / POWER LINE
Two separate Jack for the PSTN
Telephone Line and AC mains
power supply
3

MODELNAME
DDP-700
USER GUIDE PAGE
INSTALLATION DO’s AND DONT’s
Unpacking your DDP-700
Whenyouunpack your DDP-700, make sure youkeep all packing materials in asafe place, in case you laterneed
to transport it to return it for servicing. In the box, you will find :
- DDP-700handset
- 2 pieces of battery
- a belt clip
- theDDP-700 base unit
- AC adaptor
- User Manual
- a telephone line cable
Connection and condition for use
The DDP-700 is connected to the public network using the standard telephone plug and socket systems.
You can connect your DDP-700 to :
- a line connected directly to a local exchange, with its own directory number
- an extension socket connected to a local exchange
- anextensiononan approved PABX
Choosing a site for the Base
TheDDP-700baseunitshould be installed where :
- the mains adaptor plug will reach the 220V AC main power supply
- the telephone cable will reach your telephone line socket
- it is not close to another telephone
- it is not close to a sink, shower or anywhere else where it might get wet
- itis not close to otherelectrical equipment (washing machines, microwave oven, TV, fluorescentlights,
etc.)
1. Choose a suitable site for the DDP-700 base
2. Plug-in the mains power lead and the telephone line cord on the DDP-700 base back side
3. Plug the mains AC adaptor into the AC mains socket
4. Insert the telephone line plug into the telephone socket.
Radio signal between handset and base
To use your DDP-700 cordless telephone, you must be able to establish a radio link. It is therefore noted that :
- placing the base unit as high as practical will give a better result.
- placing the base unit near any large metal object, like refrigerator or filling cabinet may block the
transmission of radio signal
- other solid structures, like walls may reduce the radio signal strength
4

MODELNAME
DDP-700
USER GUIDE PAGE
INSTALLATION DO’s AND DONT’s
Charging the batteries
Your DDP-700 handset need battery to operate. During the first use of your DDP-700, it is recommended that the
handsetisleft over on charge overnight toensure maximum in-use time.
1. Onlyuse the rechargeable batteries suppliedwith your DDP-700
2. Installtherechargeable batteries into the rear ofyour handset. MAKE SURE youinsertthebatteriesin correct
polarity.
3. Position the battery cover over the rear of the handset and slide into place.
4. Place the handset on the base unit to charge.
5. The handset will beep and the red LED CHARGE light on the base unit.
NOTE : Ifthe charge donot light up, reposition thehandset in the base unitensuring the chargingpoints contact.
Electrical Safety
1. DO NOT install the base unit near a sink, bath or shower or anywhere else where it could get wet. Electrical
equipment can cause serious injury if used while you are wet or standing on water.
2. Ifthe baseuniteverfalls intowater,DO NOTretrieve ituntilyouhaveunpluggedtheAC mainspoweradaptor and
the telephone line plug from the telephone wall socket.
3. DO NOT allow the handset to come in contact with water
4. DO NOT open the handset or the base.
5. DO NOT allowthecharging contacts or the battery to comeincontact with electrical conductive materials such
as metals, rings, paper clip, key, etc.
6. MAKE SURE you insert the batteries in correct polarity.
7. NEVER USEyourDDP-700inthe open air during a thunderstorm -unplugthe base unit from the telephone line
and the AC mains socket where there are storms in your area. Damage caused by lighting may likely to
happen.
8. If your DDP-700 is not to be used for long period of time, disconnect the main AC power adaptor from the AC
power socket and the telephone line from the telephone wall socket
Emergency calls
YourDDP-700 need mains power. So youcannot use for plac-
ingacall during AC power failure.
Thus, a basic phone that does not need AC mains power is
neededtoplaceanemergency call during power failure.
5

MODELNAME
DDP-700
USER GUIDE PAGE
Handset battery charge level
1. The Level of the battery power is indicated as a battery icon on the LCD display in the handset. If the battery
icon shows empty, your DDP-700 need to be charge.
2. Whenin use and your DDP-700 emit battery low warning tone, yourDDP-700 need to be charge
3. Whenfully charge your DDP-700 will operate for eight (8) hours talk time forearpiece, one hour forthe speaker
phone and 100 hours of standby time.
GETTING STARTED
On / Off function
Thebutton when press and hold willswitch on or off the power of your DDP-700 handset. When your DDP-700
issetto off, your DDP-700 will conservedthe battery power, however placing andreceiving a call cannot be made.
Out of range warning
Ifyouare moving around during a calland you hear an out ofrange warning tone from your DDP-700handset,thi
means you are going out of your DDP-700 base coverage. Move a little closer until the tone stops. If you do not
move, your call may be cut off. If your call will cut off, you will hear beep tone and your DDP-700 handset antenna
icon will continuously flashing.
Press , your DDP-700 handset will display BASE , flashing. You may need to go closer to the base to
establish radio link between the handset and the base.
Standby mode
Whenthehandset is not in use, thehandset is in the standby mode. TheLCDwilldisplaythe handset name and
number. The clock and date is also shown.
Note that, the clock and date should be set.
1. Press up to select HANDSET menu.
2. Press
3. Press to select CLOCK.
4. Press .
5. Press to select SET CLOCK.
6. Press . The 2 digits hour number are blinking.
7. Press the hour on the numeric keypad, 05= 5 AM, 17=5 PM, 23=11 PM
The clock (time and date)
YourDDP-700 handset can display thetime and day. You should set it to the correct time and day at this time. For
your first setting on your DDP-700 - digital cordless phone, follow the instruction below to set the time and day.
6

MODELNAME
DDP-700
USER GUIDE PAGE
8. Press down to go to the minutes setting. The 2 digits minutes are blinking.
9. Press the minutes directly on the numeric keypad, 01=for 1 minute, 25=25 minutes.
10. Press down to go to the month setting. The 2 digits Month number are blinking.
11. Pressthemonthdirectly on the numerickeypad, 01=January, 05=May, 11=November.
12 Press down. The 2 digits Date are blinking.
13. Press the date directly on the numeric keypad (example : 01, 02, 10, 20, 31)
14 Press . A confirmation tone is heard.
15. Press three times to exit CLOCK setting or repeat 5 to 13 to set the clock once more.
CONGRACONGRA
CONGRACONGRA
CONGRATULATULA
TULATULA
TULATIONS!TIONS!
TIONS!TIONS!
TIONS!
You just made the first programming - setting the clock and date on your DDP-700- digital cordless phone.
Note : WhenyourDCT101 encountered ACpowerfailure, or whenyou removed the ACadaptor,theclock will
be inaccurate. Upon power up, it will be automatically set the time to 00:01 and the date to 1-01 . You
need to set the correct time and date when your base is power on. See Set the clock -autocalibration on
page26,this will automatically setthedate and time baseon the FSK CID ofthePSTN network. This will
only work if your PSTN connection can provide FSK CID and have the date and time information.
WhenyourDDP-700 handset is outofbattery power, just putthe unit on thechargecradle on the baseand
the time and date will be restored. There is no need to set again the time and day.
Ifyou register new DDP-700 handset, there is no need to setthe clock on the new handset The Time and
Datewill synchronized toall handsets.
If you changed the Time and Date on one handset, the changes will take effect.
If you register another DECT GAP compatible to your DDP-700 base, the time and date may not be
possible to display on the LCD of this new handset.
7
GETTING STARTED