Denver DPC-20 Assembly instructions

INSTRUCTION MANUAL
FSK/DTMF SystemCaller I.D. Telephone
DENVER DPC-20
Please apply for the service on your local post office before using it
FEATURE
1. Tel. Line
2. DC Jack
3. Ringer ON/OFF Switch
4. Volume HI/LO Switch
5. Hook Switch
6. Wallmount knob
7. Delete button
8. Store button
9. Speaker
10.Handset Jack
11.UP button
12. DOWN button
13. DIAL button
14. PAUSE button
15. M1,M2 and M3 button
16. Number Keys
17. In-use LED
18. H-F button
19. Microphone
20. REDIAL button
21. FLASH button

Telephone features
• 12-digit LCD dialing number display
•3 one-touch memory keys of 16 digitsmaximum
•Date. Real time display
• Real time calibrated by caller ID message automatically
•Redial function
• Hands-free function
•Flash function
• Pause function
• Alarmclock
Caller ID features
• LCD 5 levels contrast regulation
•DTMF/FSK system
• Supports multi data message format and single data message format
• 63 sets (max.) in-coming call stored.
•Upward and downward seeking in-coming call message
• Callback the call number which displays on the screen
•Single or all call messages can be deleted
• LCD will display Total calls, Newcalls, Call sequence
•Withheld, unavailable, line error prompt
OPERATION INSTRUCTIONS
BEFORE USINGYOUR CALLER ID PHONE, YOU MUSTINSTALL 3 AAA BATTERIES OR PLUG INTO THE
DC6V/100mA AC-DC ADAPTOR.
FUNCTION AND OPERATION DESCRIPTION
Setting at the on-hook state
At the on-hook state, press STORE into setting mode, and LCD will display: “ SET 1 DATE ”
Use UP/DOWN to select among different items. When you choose one item, press again to go into its
setting, After you finish with one item,you should press STORE again in order to confirmand/ormove to another
item.To change items, always use UP/DOWN. If you want to leave the setting mode at any time, press DEL.
The setting of different items are shownin detail as follows:
DATE/TIME
When LCD displays “SET 1 DATE”
press , and the year digits willflash. Use UP/DOWN to
change the year (STEP is 1), then press into setting of themonth.Repeat the operation to set the
date,hour and minute by tum.When finished,LCD will automatically display the corresponding day of the week.
LOCAL CODE
When LCD displays ,press ,and you will see on LCD , then press
again to make the first! -flash. Edit with UP/DOWN and then press to confirm,Advance as above to set
the rest.
FLASH TIME
When LCD displays , press STORE, and you will see onLCD Edit with
UP/DOWN, and then press STORE to confirm.
LCD CONTRAST
When LCD displays , press STORE and useUP/DOWN to select among 5 degrees when
you prefer. The default setting is 3.
ALARM CLOCK
When LCD displays , pressSTORE, and you will see on LCD (total 3 alarm
clocks selectable). Use UP/DOWN to make the option, and then press STORE. 3 alarm clocks could be setting
with different time.
Operation at the on-hook state
Receiving incoming calls: when receiving a phone call, LCD willdisplay the phone number together with the
information of date, time, and a serial number. A newnumber will carry a NEW!, icon, and a repeated number
will carry a REP! icon ,A private call (when the caller prefers his/her number to be hidden) willdisplay!!, A call
out lf service will displays!. An incorrect incoming signal will display!!. If it is a FSK format CLI signal, the current
month, date and time display will be updated (while the year remains unchanged).
Checking incoming calls: You can use UP/DOWNto viewthe information of the incoming calls including phone
number, date, and time, To scroll rapidly, press and hold UP/DOWN.
Re-dialing an incoming number, For a local call, just press the RD key when the number is on display.For a
long distance call press twice to add “0” at beginning of the area code if it has not been set the telephone
should be unlocked.
Pre-dialing:Enter a phone number and press the RD key. In the case of any input mistakes, use DEL to
correct.
Using the DEL key:
1
2In the Pre-dialing mode, use it to correct any input mistakes.
When scrolling incoming calls, use it to delete a phone number, Press and hold it for 4 seconds will delete
all the incoming calls.
Operation at the off-hook state
UP/DOWN: Check incoming.
One-touch memory
A Store:on-hook/off-hook+number+STORE+Mi(I=1-3)
(The number could be the pre-dialing calls, incoming calls or outgoing calls.)
BDialing: off-hook+Mi(I=1 2 3)or on-hook+Mi+RD(I=1-3)
Alarmfunction
The alarmwill be started for about 1 minute if the alarmclock isturned on. Pressany key to stop it and return to
on-hook state. The alarmclock 3 will be turned off aut omatically after every alarm. If the telephone is on
operation during alarmtime, the function will be cancelled this time.
“SET 2 ACODE” “ACODE -----”
“SET 3 FLASH” “FLASH 3 110”
“ SET 4 LCD ”
“ SET 5 ALAR ” “ 1 12-00 OFF ”
STORE
STORE
STORE
STORE STORE
STORE