Denver PFF-1514B MK2 User manual

PFF-1514B MK2
denver.eu
Aug , 2022
À DÉPOSER
EN MAGASIN À DÉPOSER EN DÉCHÈTERIE
OU
FRFR
Cet appareil et
ses cordons sont
recyclables

Language
English
German
Danish
Dutch
French
Spanish
Italian
Portuguese
Swedish
Finnish
Norwegian
Polish
Abbrevation
ENG
GER
DEN
NED
FRA
ESP
ITA
POR
SWE
FIN
NOR
POL
Order
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

ENG 1
Important safety information
WARNING: Please read the safety instructions carefully before using the product for
the first time and keep the instructions for future reference. Read all the safety
information below before using this Frameo product.
1. This product is not atoy. Keep it out of reach of children. If operated by
children, please always make adult supervision.
2. Please keep the product away from pets.
3. Do not try to open the Frameo product! The device may contain parts with deadly
voltage.
4. Do not expose to heat, water, moisture, direct sunlight!
5. Only charge with the original adapter supplied with this product!
6. Repairs or service should only be performed by qualified personnel.
7. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
The apparatus shall not be exposed to dripping or splashing and that objects filled with
liquids, such as vases, shall not be placed on apparatus.
8. The direct plug-in adapter is used as disconnect device, the disconnect device shall
remain readily operable. So make sure there is space around the power outlet for
easy access.
9. Product operating and storage temperature is from -10 degree Celsius to 40 degree
Celsius.
Under and over this temperature might affect the function.

1. POWER
After connecting power adapter, please press and hold power button for
approximately 5 seconds (until screen turns on).
When it is on, press and hold power button for approximately 3 seconds to
access reboot or power off menu. Short press on power button will turn off/
onscreen (but leave the photo frame in on position).
2. USB
Connect a USB flash drive. USB is for service use only.
3. RESET
Use a needle or paper clip to reset unit.
4. MicroSD card
Load external max 32GB microSD memory card here.
5. DC
Connect DC adapter to power on the device.
ENG 2
4 2 5 3
1

User Manual
Version: 1.11
ENG 3

Getting started
Congratulations on your brand new Frameo photo frame!
If you are new to using Frameo then start by following the Frameo quick setup or follow the
on-screen guide when powering it on for the first time.
Once you have set up your Frameo frame, you can start connecting it to your friends and family.
Frameo app
To send photos to your frame, use the Frameo app for iOS or Android.
Find the Frameo app by scanning this code:
For Android:
Search for “Frameo” on Google Play.
For iOS:
Search for “Frameo” on App Store.
ENG 4

Frameo quick setup
When starting your frame for the first time, you will need to set up the frame.
●Select a language. This will be the language used on the Frameo.
●Connect your frame to the internet by connecting it to Wi-Fi.
●Verify or correct the date and time.
●Frameo may ask you to update to the latest version. It is recommended to update
your frame before continuing if asked to.
●Enter your name, and the location where you have placed your frame e.g. “John Doe”
and “Living room”, “Kitchen” or “Office”. Finally set the timezone if not already correct.
ENG 5

Start using Frameo
Next step is to connect Frameo with your friends and family by providing them with a code from
your frame.
If you want to be able to send photos to the frame yourself, start by downloading the app for iOS
or Android on App Store or Google Play. Then use the code to connect your frame and app as
described below.
Connecting a new friend
Make sure that your friend has downloaded and installed the Frameo app.
Click the add friend icon on your frame . A dialog will appear showing a connection code,
which is valid for 12 hours.
Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone call, to your
friend.
Once your friends have added the code in their Frameo app, they will automatically appear on
your frame and be able to send you photos.
Read chapter Change options for a friend to allow connected friends, to retrieve and share the
connection code via the smartphone app.
ENG 6

Navigating your Frameo
Swipe left or right to go through your photos.
To access the menu, simply tap once on the screen.
In the menu you will find the most used features.
Add friend
This will generate a code that you can share with your friends and family so they can connect and
send photos to your frame.
Settings
Opens the Settings.
Power menu
Opens the Power menu.
React
Opens the React menu.
NB. The React menu can also be accessed by double-tapping on the screen.
Hide photo
Hides the current photo. This means that the photo will no longer be shown in the slideshow. If
needed the photo can be shown again through the settings menu.
Gallery
Opens a gallery which allows for easy and fast navigation through your photos.
Fit to frame/Fill frame
This toggles how the photo is shown.
ENG 7

The Fill frame option is the default. The photo is scaled so that it fills the whole screen. It will be
centered around what is selected as the most important part. See the first picture below.
Fit to frame will make sure that the entire photo is shown on the screen. See the second picture
below.
Adjust photo
Allows you to adjust the position of the photo in the frame for an even better fit. Here you can also
use to rotate your photo.
Interacting with videos
When a video is shown two additional controls are shown. One for play/pause of the video and
one to control the volume level for video sounds.
Press to start the video playback. Pressing will pause the video playback.
Press to open the volume slider. Use the slider to adjust the volume level for video sounds.
Pressing will mute the video while pressing will unmute the video.
ENG 8