DepthQ WXGA User manual

PLEASE NOTE: Infra-Red (IR) emitter and Liquid Crystal (LC) glasses are not
included with the projector. These items must be purchased separately.
VGA Cable
A product of Lightspeed Design, Inc. co-developed with InFocus®C o r p .
Quick
Start
HIGH DEFINITION 3D VIDEO PROJECTOR
DepthQ-WXGA

8
Folding glasses typically turn on when the ear-pieces are opened.
Others may have a pressure-sensitive switch or a physical button.
Turn on your LC shutter glasses
7
*DepthQ®also supports 1024 x 768 and 800 x 600 input at 120 Hz.
Ensure desktop is set to 1280 x 720* and refresh rate is 120 Hz.
Turn on your computer
120 Hz
720*
1280*
(USB-connected emitters may not require external power.)
Either aim your emitter at your screen (for front-projection),
through the screen (for rear-projection), or point it directly
towards the viewer. Use whichever method works best.
Supply power to your IR emitter and aim
~1 min
glow
2D Device
*DVD, VCR, Cable Box or Game Console
2D Device
2 D Device
2D
A) If your graphics card has an onboard DIN3 connector (FX3700, FX4600, etc.)
connect your IR emitter directly to the onboard DIN3 connector.
B) If your graphics card does not have an onboard DIN3 connector (FX1500)
you will need to use a stereoscopic breakout cable (VGA to VGA + DIN3).
C) Some IR emitters may connect to a USB port instead of using a DIN3.
Also connect: Your IR Emitter to Computer
DIN or USB cable
(not included)
Infra-red Emitter
(not included)
optional
VGA
3D

www.depthq.com/support.html
www.depthq.com/faq.html
PowerPoint®
To flip the image horizontally
turn on the Rear Project setting
using Menu | Setup.
Note: this will also require that
you swap eyes. See Stereo-
scopic Concerns.
Rear projection?
To flip the image vertically turn
on the Ceiling Mount setting
using Menu | Setup.
Ceiling mount?
www.depthq.com/accessories.html
Buy a Ceiling mount, Screen
and Other Custom Accessories
*approximate values
5’4”/ 1.6m
8’ / 2.4m
10’7“ / 3.2m
13’3”/ 4m
15’11“ / 4.9m
18’7”/ 5.7m
21’3”/ 6.5m
23’11”/ 7.3m
4’4”/ 1.3m
6’6“ / 2m
8’8”/ 2.6m
10’10“ / 3.3m
13’ / 4m
15’2”/ 4.6m
17’4”/ 5.3m
19’6”/ 6m
40”/ 1m
60”/ 1.5m
80”/ 2m
100”/ 2.5m
120”/ 3m
140”/ 3.6m
160”/ 4.1m
180”/ 4.6m
*
*
Status and Service
Setup
Advanced Picture
Basic Picture
Menu
H
.15H

Lightspeed Design and
UL and c-UL (US/Canada), FCC-A (US/Canada), CE (CE member countries), GOST (Russia), TUV GS (Germany),
CCC (China), IRAM (Argentina), NOM (Mexico), C-Tick (Australia), MIC & eK (South Korea), PSB (Singapore).
DepthQ is a registered trademark of Lightspeed Design, Inc. InFocus, In Focus, and INFOCUS (stylized) are either registered trademarks
or trademarks of InFocus Corporation in the United States and other countries. DLP, and the DLP logo are registered trademarks of Texas
Instruments and BrilliantColor is a trademark of Texas Instruments. Microsoft, PowerPoint, and Windows are trademarks or registered
trademarks of Microsoft Corporation. NVIDIA and the NVIDIA logo are trademarks or registered trademarks of NVIDIA Corporation.
All rights reserved.
DepthQ-WXGA HD 3D projectors support the highest quality stereoscopic display
technique available - frame-sequential progressive “page flip” - at a very high
frequency of 120Hz (60 fps per eye). This provides flickerless, fatigue-free 3D
viewing even under high ambient light conditions. In order to be compatible
with this projector, your stereoscopically-enabled display system must deliver
120Hz, 1280x 720 resolution* data using this frame-sequentialL-R-L-R- method.
If you are using nVidia Quadro®graphics cards, be aware that by default, Open-GL
stereo operation is turned OFF in the associated nVidia driver. You must navigate
to the “stereo enable” option and set it to ON in order to view realtime stereo-
scopic displays using this hardware.
If your 3D is “inverted” (pseudo-stereo), you usually have a range of options.
Some IR emitters have a hardware switch to reverse the eyes. Additionally, your
stereo-enabled software may include an option to accomplish this. Lastly, your
video driver may allow you to “swap eyes”. Use whichever is easiest.
*DepthQ®also supports 1024 x 768 and 800 x 600 input at 120 Hz.
Stereoscopic 3D Concerns
visit www.depthq.com/support.html
If you are seeing the projected image jump between “only left eye” and “only right eye”
every few seconds (while viewing through LC shutter glasses), turn OFF, and then ON
the 3D Images setting using Menu | Advanced Picture. (Please note that this is a
work-around for a known bug, and future firmware upgrades will address this issue.)
Advanced Picture
menu
If the stereo-sync is malfunctioning
Press the Menu button. If the colors are still wrong, press the arrow button
one or more times until the color shift is corrected. (Please note that this is a
work-around for a known bug, and future firmware upgrades will address
this issue.)
If the colors are wrong
ensure your desktop is set to 1280 x 720 and the refresh is 120 Hz.