DERUN LIGHTING TECHNOLOGY DR-CON-IR20M-3CH-LV User manual

DERUN LIGHTING TECHNOLOGY CO., LTD
Web: www.derunledlights.com Email: [e-mail]
User manual
Part No: DR-CON-IR20M- CH-LV
Summarization
20 key infrared music LED controller adopts the advanced micro control unit. t is used for controlling a variety of
LED lamp. For instance, point-source light, flexible strip light, wall washer light, glass curtain wall light and so on,
it has many advantages such as low cost, convenient connection and ease of use. Meanwhile you could adjust
brightness, static colors and color changing effects via infrared remote control, when it is in sound control-mode,
the colors will changs with the music rhythm.
Technical Prameters:
●working-temperature: -20-60 ℃ ●input voltage:DC12-24V
●output: 3 circuit ●connection mode: common anode
●ecternal dimension: L63*W35*H22mm ●packing size:L88*W65*H40mm
●net weight:50g ●gross weight:66g
●maximum current:4A ●static power loss: <1W
●output current: 2A ●output power: 72W
Remote control functions
button Function
When in static mode(default): to adjust the brightness(16 grades)
When in jump3, jump7,fade3, fade7 mode: to adjust the light flashing rate(8 grades)

DERUN LIGHTING TECHNOLOGY CO., LTD
Web: www.derunledlights.com Email: [e-mail]
When in music mode: to adjust the sensitivity of receiving music
On/Off Turn on /off the controller
Red/green/blue
White/orange
Yellow/cyan/purple
To select corresponding static color
Jump3 3 colors jump changing
Jump7 7 colors jump changing
Fade3 3 colors gradual changing
Fade7 7 colors gradual changing
Sound-control mode_ Ⅰ (general music), all colors will gradual or jump change following the
music/ sound rhythm. f no music/sound input or sensed, all colors will gradual change.
Sound-control mode _Ⅱ (tenderness music), all colors will slow breathing or jump change
following the music/sound rhythm. f no music/sound input or sensed, all colors will slow
breathing change.
Sound-control mode_ Ⅲ (active music), all colors will jump change following the
music/sound rhythm. f no music/sound input or sensed, current colors keep lighting.
Sound-control mode _Ⅳ (DJ music), all colors will jump following the music/sound rhythm.
f no music/sound input or sensed, all colors are off.
Direction for use
1. Connect the load lines and power lines, make sure all connection correct before power switched on.
2. nsure there is no obstacle between the R controller and the receiver when operating.
3. This product should not be used in outdoor and any other humid environment. Not allow to touch water or any
liquid. No impacting and knocking. Should be not use in high temperature and high pressure environment to avoid
the product damage, and cause short-circuit. Fire disaster and electric shock etc.
4. The manufacturers will not be responsible for the product damage, proerty damage, personal injury and any
other losess which are caused by improper use.