Desa HS36 Quick start guide

hs36 - 36" OUtdOOr Fireplace hOOd
hs42 - 42" OUtdOOr Fireplace hOOd
1. Removeprotectivelmfromstainlesshood.
2. Alignthreenotcheslocatedonbacksideofhoodwithfrontfaceofreplace(seeFigure).Notchesshouldbeatleast2"up
fromedgeofreplaceopening.
3. Holdreplacehoodinplace.Usinga#34(0.11dia.)drillbit,drillthrough3notches.
4. Insert3screwsthroughnotchesinhoodintoholesinreplace.
OUtdOOr Fireplace hOOd
iNstallatiON iNstrUctiONs
Figure - Installing Hood
Notches
onHood
Screws
12131101
121311-01
Rev. A
03/07
2701IndustrialDrive
P.O.Box90004
BowlingGreen,KY42102-9004
www.desatech.com
NOTAUPC