Broan 46000 User manual

BROAN ®SPECIFICATION SHEET
MODEL 46000
4-WAY
CONVERTIBLE
RANGE HOOD
Deluxe features in our smaller shell - offers the
most hood for the money.
FEATURES
•Infinite speed fan control
•Polymeric blade and light lens (accepts up to 75W bulb)
• Washable aluminum filter
• Converts to non-ducted by removing cover plate from
control panel and installing the non-ducted filter (pur-
chase separately)
• Mitered sides and hemmed bottom for safety and good
looks
• Damper/duct connector included
• 7" round plate included
• Contemporary styling in White, Almond, Biscuit and
Stainless Steel
• Available in 24", 30", 36" and 42" widths
• Special Order Color - Black (24", 30" and 36" only)
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 2.5 190 7.5 31¼"X 10" (H)
120 2.5 190 7.5 31/4'' X 10" (V)
120 2.5 220 7.5 7" Round (V)
120 2.5 Non-Ducted
_! HVl-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by
the Home Ventilating Institute, for off-the-shelf products,
as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in AMCA's state-of-the-art test
• laboratory. Sones are ameasure ofhumanly-perceived
loudness, based on laboratory measurements.
TYPICAL SPECIFICATION
Range hood shall be Broan Model 46000.
Unit shall be convertible between ducted (using a washable
aluminum filter) and non-ducted (using a Microtek _System II
filter).
Motor to be permanently lubricated. RPM not to exceed
3250.
Unit shall have infinite speed fan control with separate light/
night light switch.
Sides shall be mitered and bottom edge hemmed - with no
sharp edges.
Air delivery shall be no less than 190 CFM (3¼ x 10 dis-
charge) and 220 CFM (7" round discharge) and sound
levels no greater than 7.5 Sones. All air and sound ratings
shall be certified by HVI.
Unit shall be U.L. listed.
'
* Center point for 7" round installation
REFERENCE
Broan-NuTone LLC, 926 West State Street, Hartford, Wl 53027 (1-800-637-1453)
QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
10K 99044004A