DesignHouse 562025 User manual

ASSEMBLY INSTRUCTIONS
562025, 561431
Lazy Susan Cabinet

Unpacking Precautions
Hardware Considerations/Screw Size Clarification
(I) (Small 1/2") (J) (Medium 1 ")
(K)(Large 1 1/8")
Step 1：
Step 2:
Repeat step 1 for the right side
If using a sharp object to unpack the cabinet components and the packing materials, be careful to avoid
scratching or damaging the cabinet components. The various packing materials may be used to protect
the cabinet components during assembly. During the unpacking process, place the various components
away from and to the side of the work area so that they will not be inadvertently knocked over or
otherwise damaged.
Put the left side panels together with Three metal clips(Each metal clip will
need 2 small crews(I).

Step 3:
Step 4:
Attach the two face frames together; Use the large screws(K) to
connect the Large face frame to the smaller face frame, two
screws per side.
Attach the large face frame to the right side panel with two
Large screws(K).

Step 5:
Step 6：
Step 7：
Repeat the Step 6 for the middle lazy Susan
with eight screws.
Slide both the right & left side panels into the grooves on the
face frames and secure with metal clips.
Attach the bottom lazy Susan to the wood blocks provided on
the sides using the large screws(K) in the pre-drilled holes, two
screws per side panel(total eight screws).

Step 8：
Step 9：
Attach the top large triangle brace using two metal
clips attaching to the left & right sides.
Insert the Back panel between the two side
panels; use the Large screws(K) to attach using
the pre-drilled holes three screws per side .

Step 10：Step 11：
Step 12：
Install the toe kick with two metal clips to
the side panels, and one metal clip
connecting two toe kicks.
1. Magnetic latch: Install the small metal plate
to the back of the door, using the two small
screws (I).
Install the doors on the left side or the right side(Reversible).
2. Install the plastic magnet latch to face frame,
using the two small screws(I).

Step 13：
Use Two middle size screws(J) to attach the wooden triangle to the panel and
back panels. (Total of five corners)