DESKY Elite User manual

Elite Ergonomic Chair
Installation Instructions
Step 1
Flip both base and back suport upside down. Slide back pannel
into position and use supplied screws to firmly secure as
pictured.
Insert each of the casters into each corresponding leg of the base.
Once completed, insert the cylinder into the base.
Proceed to secure both arm rests in position by using 4x
M6 bolts on each arm.
Step 2
Step 4
Step 3
Align the base with the bottom of the chair and ax into
position.
*If headrest is
required
X3
M8 X 30mm
X8
M6 X 25mm
X8
M6 X 25mm
X2
M6 X20mm

Elite Ergonomic Chair
User Instructions
Seat Height Adjustable
Flip up lever on right side to raise or lower seat. Adjust so that your feet are supported adequately on the floor.
Armrest Height
Press the button and raise or lower the armrest. Adjust height to adequately support elbows to take strain o of shoulders.
Armrest Depth
Grasp armpads and push them forwards and backwards to suit your arm support.
Armpad Angle
Grasp armpads and rotate them inwards or outwards to adjust elbow support to suit spectific tasks. An inward position works
during keyboard use, while an outward position is recommended during mousing.
A
B
C
D
E
C
I
Seat Depth Adjustment
Pull the lever under the right-side of the seat to adjust positioning.
F
GLumbar Depth
Turn knobs on either side of back-frame to adjust depth of lumbar support cushion. A slack mesh back is normal and may be
tensioned by adjusting the cusion forwards.
F
B
C
DE
A
Multi-Position Tilt Lock
Recline to desired position, and turn lever anti-clockwise to lock. Turn lever clockwise to release tilt-lock.
G
HBackrest Height
Hold backrest by both sides and pull up, one step at a time to desired height. To lower backrest, pull it up until maximum
height and then returnto lowest height in order to start again. Adjust height so that the backrest curvature follows the curve
of your back.
H
IHeadrest Height (Only Applicable when positioned)
Adjust height by holding both sides of headrest and pull up or down to your desired height.
F