Devine EZ-Creator Key XL User manual

EZ-Creator Key XL
User Manual
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

Introduction
Thank you for purchasing the Devine EZ-Creator Key XL. This compact MIDI key oard
offers ideal, hands-on control over the parameters of a DAW or other software programmes
where using a mouse and computer key oard can e restricting. The small size and USB-
us powered design com ined with the practical control features and smooth software
integration gives you everything you need for streamlined audio production.
This user manual will not only provide set-up instructions, ut will also explain how to get the
very est out of the functions this key oard has to offer and how to solve any pro lems you
may encounter while setting up or using it. We strongly recommend reading these
instructions in detail efore using your MIDI key oard.
Box contents:
1x EZ-Creator Key XL MIDI key oard
1x USB connecting ca le
1x Bitwig 8-Track DAW software voucher
Bitwig 8-Trac DAW
Specially for this series, Devine has colla orated with one of the most
accessi le and user friendly DAW developers: Bitwig.
The Bitwig 8-Track DAW (Digital Audio Workstation) provides any
eginner or advanced music producer everything they need, and y
purchasing a Devine MIDI controller, you’re granted free access to this
excellent software.
While the 8-Track edition of Bitwig is not limited in terms of functionality,
only a certain num er of audio tracks can e used at the same time. As such, this entry-level
version of the program offers the opportunity to understand and get to grips with all of the
availa le functions efore upgrading to the full version (Bitwig Studio) at a later date. With
the included voucher, you are entitled to a reduced rate when upgrading to Bitwig Studio.
To use Bitwig 8-Track, simply register at www.bitwig.com/8-trac and follow the steps to
install Bitwig 8-Track on your computer.
A special function has een included in Bitwig for the Devine EZ-Creator Series, ensuring
that your model is included in the list of compati le MIDI devices. This way, when you
connect your device up to a computer running Bitwig, the device will immediately switch to
the correct operating mode for Bitwig.
If you don’t need to use Bitwig 8-Track, then you can give the voucher to someone else
since this software can also e used without a Devine MIDI key oard.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

Safety Instructions
Every person involved with the installation, operation and maintenance of this device must:
- Be qualified.
- Be skilled.
- Have read the instructions included in this user manual.
- Be sure that neither the device nor any included accessories are damaged. Should the
device or the included accessories e damaged, please contact your retailer for further
advice.
- Ensure that the device is in good working condition and is safe to operate. Please follow
the advice and instructions as they are descri ed in this user manual.
Damage caused y misuse and/or modifications made to the device are not covered y the
warranty.
This device does not contain any parts that can e repaired or replaced y the user. Should
maintenance or repairs e necessary, they must e carried out y a qualified technician.
Important information regarding health and safety:
- Do not remove any la els or stickers from this device.
- Do not leave any ca les lying around where they are in danger of causing a tripping
hazard.
- The housing of this device should not e opened and any hardware or software that may
e present should not e modified.
- To achieve optimal performance, any inputs on the device should not e fed with a signal
higher than necessary.
- The device must only e used indoors; contact with water, rain and moisture must always
e avoided. Do not place any o jects containing liquid on top of the device.
- Remove the device from any near y flames or heat sources; do not place it near
flamma le fluids, gasses or o jects.
- Disconnect this device from a power source if it is not eing used for a long period of time,
if maintenance is necessary, or if it needs to e cleaned.
– Do not pull or tug on the ca le to remove a plug as this may cause damage.
- Do not use any ca les other than those specified in this manual. Do not use defective
ca les. Please contact your retailer if the included or necessary ca les do not function
properly with this device.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -
WARNING!
Keep this device away from moisture, water and rain
to prevent ris of electric shoc s!

- In the event that the device is exposed to extreme temperature changes (e.g. transported
from a cold outdoor environment into a warm indoor environment), it should not e turned on
until it has reached room temperature. This is necessary to prevent moisture (condensation)
from forming inside the device, which could lead to electric shocks.
Use & Operation Guidelines:
- This device is intended for indoor use and must only e operated y an adult.
- This device is not suita le for use y children and must always e operated y an adult.
- This device can only e used in appropriate environments where no damage to the device
can occur. Do not use the device in moist or dusty environments such as:
- indoor swimming pools where chlorine is used
- eaches or any location where sand and/or salt is present
- outdoors
- indoors in spaces where intense heat sources are present, or where it can reach
temperature levels that would e considered uncomforta le for a person.
- Avoid impact and collisions during use and transport. Do not move or transport the device
while it is in use. - Avoid using excessive force when installing and operating the device.
- Any user must ecome familiar with the functions of this device efore using it.
- Should the device not e used in the manner descri ed in this user manual, damages or
even injuries could occur. Devine cannot e held responsi le for any injuries or damages
that occur as a result of improper use of this product.
Storage & Transport:
- This device is not designed for mo ile use. This device must always e transported in its
original packaging, or in an appropriate padded ag/cover that is a le to provide adequate
protection.
-This device has not een designed for continuous (24/7) use. Regularly switching off the
device will not effect its lifespan. Always switch off and disconnect the device whenever it is
not in active use.
- When the device is not in use for long periods of time, always disconnect the device and
store it in a dust free environment.
- Do not expose the device to extreme temperature shifts.
Housing:
- Frequently inspect the housing of the device and always just efore use. Avoid operating
the device if any large dents or cracks are found in the housing, or if screws are missing. Do
not use the device if the housing is not in good condition. Contact your dealer or a qualified
technician if you are unsure a out the state of the device.
- Check the device and screws for any corrosion. If any corrosion is found, do not use the
device. Contact your dealer or a qualified technician if the screws or housing show any signs
of corrosion.
- Ensure that every power and signal socket is securely fitted. Do not use the device if any
of the sockets are not secure.
- Avoid the uild up of any dust and dirt. Clean the device once a month y disconnecting it
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

from the power supply and wiping it down with a dry or slightly moist cloth. If the device is
used frequently, the device should also e cleaned more frequently.
Symbol Explanation:
Ensure that this device is disposed of properly. This product falls under the
WEEE (Waste Electrical and Electronic Equipment) directive. The
requirements of this directive apply to all manufacturers and producers of
electronic devices in the EU. Do not throw this product away with regular
ru ish. Please contact your local authority for more information a out how
to recycle and dispose of these products in your region. By recycling this
product in the proper manner, we can work together to ensure that we can
continue to enjoy these kinds of products and still protect the environment
as much as possi le.
CE: The CE logo indicates that this product meets the European norms and
requirements to which it must legally conform.
Suitable for indoor use only: This product was designed for indoor use
only. The maximum environmental temperature must not exceed 40
degrees Celsius (104 degrees Fahrenheit).
Contact:
Devine Pro Audio Products
Verrijn Stuartweg 18
4462 GE Goes
The Netherlands
Please do not send any physical products to this correspondence address.
Should you wish to send a product for repairs or for a refund, please contact your retailer for
an RMA re uest (Return Merchandise Authorisation)
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

Using the EZ-Creator Key XL With Bitwig 8-
Trac
The Devine EZ-Creator controllers have een scripted into the Bitwig 8-Track software,
adding them to a list of compati le hardware controllers. Simply select your EZ-Creator
model within the software and the key oard will immediately switch to the correct Bitwig
operating mode. This is so that you can control functions within the software using the
controller, so that you don’t need to map the controls manually, or learn anything a out the
more complex features of MIDI.
P lease note that Bitwig does not support 32- it systems.
The minimum system requirements are specified on the following we page:
www.bitwig.com/en/support/faq.html
Bitwig 8-Track and Bitwig Studio are products developed y Bitwig Gm H.
Bitwig 8-Track does not come with a physical installation CD or USB stick and can only e
installed via the Bitwig we site. This guarantees that you only get the most recent version of
the software and that any su sequent updates can e freely downloaded following initial
installation.
The included Bitwig voucher can only e used to install Bitwig 8-Track and is registered y
name in the account that you will need to create when you register via the Bitwig we site.
If you would prefer to use the EZ-Creator Key controller without Bitwig 8-Track, then the
voucher can e passed on to someone else. The Bitwig 8-Track voucher cannot e
exchanged for money, other Bitwig products, or other forms of credit.
If you do use the Bitwig 8-Track software and want to upgrade to the full version (Bitwig
Studio) at a later date, your copy of Bitwig 8-Track entitles you to a reduced upgrade tariff.
Bitwig Studio will offer all of the same functionality when used in com ination with any of the
Devine EZ-Creator MIDI controllers.
Using the EZ-Creator Key XL Without Bitwig 8-
Trac
Any of the Devine EZ-Creator USB MIDI controllers can e used with software other than
Bitwig. Since MIDI devices are universal, it is possi le to use almost any software that
supports MIDI over USB in com ination with any of the EZ-Creator controller models.
Some software examples include:
- lighting software / DMX software
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

- laser software
- general production software from other developers
- podcasting and roadcasting software
- ta lature software
- and more
Please note that, when using third-party software, settings may need to e changed to
ensure compati ility. Always read the applica le software instructions to e certain of this.
Compati ility with third-party software cannot e guaranteed.
Always check the system requirements of the software to e certain that your computer
meets the minimum recommended system requirements.
Using the EZ-Creator Series With and Without Bitwig
It is also possi le to use the EZ-Creator Series controller with Bitwig 8-Track efore
changing to a different DAW programme, other software, or another computer.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

Product Features & Specifications
The Devine EZ-Creator Key XL is a relatively compact MIDI key oard with 49 keys and the
asic features needed to play simple chords into (for example) the included Bitwig software
or other music production software or DAWs (Digital Audio Workstations).
Below, you will find an overview of all of the features offered y the EZ-Creator Key XL:
1. Keys
The key ord of the EZ-Creator Key XL has 49 keys that are a little smaller and narrower
than those of a standard piano or key oard. This is so that the device remains compact,
while it can still e used to play complex chords and melodies. The keys are velocity
sensitive to a specific degree and provide the perfect level of functionality for any eginning
producer who may only use a few chords at first.
2. Fader
Using the multi-functional and assigna le fader of the EZ-Creator Key X, you can specify
whether it functions as a master volume fader, or as a pitch controller.
This is also referred to as the M.P.V. function and includes a utton to switch etween the
different functions: Pitch, Modulation, and Volume.
This utton can e found directly a ove the fader.
Using the editor software, a different function can e assigned to the fader. For example, it
can e assigned to function as a rever effect control.
3. Edit Button with ‘+’ and ‘-’ Buttons
The Edit utton switches etween three different functions. The Octave function is the
default selection. In this mode, the LED is not lit and the ‘+’ and ‘-’ uttons are used to shift
the pitch of the key oard up or down y an entire octave.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -
1
2
113
4

By pressing the Edit utton once, the Transpose function is activated. While this mode has a
similar function to Octave, it shifts the pitch of the key oard y half an octave. Press the Edit
utton once more and the LED will start to link, indicating that the Multi-Functional mode
has een activated. The key oard can now serve a secondary function y accessing and/or
adjusting certain settings.
In Octave mode, the octave can e shifted y max. -3 or max. +3. The Transpose function
can e shifted y max. -12 or max. +12.
4. Connections
The EZ-Creator Key XL comes with the all of the connections required for controlling
hardware as well as software.
This starts with the fitted analogue 5-pin DIN port, so that this key oard can e used as a
standalone device, as a secondary key oard for a workstation, or as the controlling
key oard for a synthesizer.
A socket to which a pedal can e connected has also een included. A simple sustain pedal
can e connected to this socket using a 6.35mm TS jack plug.
A USB-B port has also een included. This dou les as a power input as well as the MIDI
data output to a computer or laptop. The EZ-Creator Key XL can e powered via USB while
sending MIDI data via the 5-pin DIN port, making the device as versatile as possi le.
System Requirements
So that your EZ-Creator model functions properly when connected to your computer or
laptop, the computer or laptop must meet the minimum system requirements. If your laptop
or computer does not meet the minimum system requirements, this may cause the EZ-
Creator to function incorrectly.
Windows Mac OS
Pentium 3 800 MHz or higher
(laptop CPU may require higher)
256 MB RAM
DirectX 9.0 or higher
Windows XP (Service Pack 2) or higher
Windows 98, ME, NT and 2000 are not
supported
Macintosh G3* 800/G4 733 MHz or higher
(laptop CPU may require higher)
OS X 10.3.9 with 256 MB RAM,
OS X 10.4.2 or higher with 512 MB RAM
G3/G4 accelerator cards are not supported
Always check if any software and/or external equipment that you intend to use in
com ination with the EZ-Creator specifies any minimum system requirements.
When powering the EZ-Creator via USB, it is recommended to connect it directly to the USB
port of your computer or laptop and avoid using any external USB hu s.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

Basic Functionality
Connecting the EZ-Creator to a computer or laptop
The EZ-Creator should e automatically recognised as a generic MIDI input and output
device as soon as it is connected to a computer or laptop. If you’re using an application that
supports MIDI input, go to the settings and select the EZ Creator as the MIDI INPUT device.
Connecting the EZ-Creator via analogue 5-pin DIN
Every EZ-Creator key oard comes fitted with a 5-pin DIN port that supports a MIDI OUT
signal so that the EZ-Creator can also e used as a secondary key oard for other
key oards and workstations that support this, or to control a synthesizer module.
Powering the EZ-Creator
The EZ-Creator is powered via USB when connected to a laptop or computer.
If you are not using the EZ-Creator with a computer or laptop, then a USB power supply
can e used to power it. This USB power supply must e a le to deliver a minimum of
500mA at 5V DC.
Ma ing Sound/Music with the EZ-Creator
A MIDI key oard like the EZ-Creator cannot produce sound on its own, ut sends a specific
signal to another device or software to control the sounds that that device or software is a le
to generate. This can e a software package or an external synthesizer.
Using the Editor (CD)
The EZ-Creator Series models come with a special Editor CD that can e used to adjust
some of the details of your controller. For example, you can adjust the MIDI note per key.
Making these adjustments can make it much easier to use your controller with external
hardware that needs to receive specific MIDI messages in order to trigger specific functions.
You can also set up details like the MIDI channel over which the controller outputs its MIDI
data.
Below is a summary of the adjustments that can e made using the Editor CD:
– setting the MIDI channel
– setting the key velocity (velocity/touch sensitivity) in 5 levels
– pedal input settings (CC num er, minimum value, maximum value)
– slider/fader settings (CC num er, minimum value, maximum value)
General uttons/kno s:
– Ena le/Disa le function, to lock keys or send out a signal
– CC message setting
– Key ehaviour:
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

Momentary (only sends a signal when held down, sends no signal when idle)
Toggle (On/Off function, press once to switch on, press once more to switch off)
Value on / Value off
Appendix: Graphic of the velocity setting options that can be selected using the
editor:
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -

Specifications
General features:
– compact EZ-Creator Series MIDI key oard
– 49 compact keys
– multifunctional slider (pitch- end, modulation or volume)
– Octave, Transpose and Edit uttons with ‘+’ and ‘-’ adjustment uttons
– various programming options
– control editing software included for function customisation
– energy consumption: 100mA or less
– USB us powered
– dimensions: 718 x 195 x 50mm
– weight: 1800g
Connections:
– 5-pin DIN MIDI output
– 6.35mm TS jack pedal socket
– USB B port
Included:
– Bitwig 8-Track voucher
– USB A to USB B connecting ca le
Minimum system requirements:
- Windows XP or higher
- Mac OSX 10.3.9 or higher
- Bitwig operates over Windows as well as Mac systems
- Bitwig 8-Track does not support 32- it systems
- Check the minimum system requirements specified y Bitwig to ensure that your computer
or laptop is a le to use Bitwig 8-Track in com ination with the controller.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV Revision date and author initials: -