digi-tech AA2170 User manual

Active
Noise Cancelling
Headphones
with Bluetooth® 5.1
AA2170
Model:
Instruction Manual

1
In Wireless mode:
A Red/Blue light will blink, when the headphone is trying to connect to a Smart
Phone/Bluetooth device.
A Blue light will stay on, when connection successful.
In ANC mode:
AUX: Green light stays On.
Wireless: Blue light stays On and Green light flashes.
In charging mode:
A Red light stays On when charging.
When fully charged, the Red light will switch off.
BUTTON OPERATING INSTRUCTIONS:
LED INDICATOR:
1.
Push upward to turn on noise reduction. Led light: Green light. ANC On.
Push down to turn off the noise reduction. ANC Off.
2. [ - ]
In Wireless mode:
Short Press: Volume down.
Long Press: Previous song.
3. [ + ]
In Wireless mode:
Short Press: Volume up.
Long Press: Next song.
4. [ •]
Turn on/off key:
Long press three seconds: Power On/Off.
In Wireless mode - Playback:
Short Press: Play/Pause.
In Wireless mode - Phone Calls:
Short press: To answer phone calls.
Long press: Reject call.
Push 2 times quickly: Redial last phone number
Note: Product will automatically power off after 5 minutes when the Bluetooth®
is disconnected.

2
SETTING UP YOUR HEADPHONES (BLUETOOTH®):
USING AUX CONNECTION:
1. Press and hold the [ •] button to turn on the headphones.
Bluetooth® will be already active as soon as you turn on the headphones.
The Red/Blue light will start to blink.
2. On your Smart Phone/Bluetooth® Device, turn on Bluetooth and search for
device name “AA2170”.
3. Pair your Smart Phone/Bluetooth® Device to “AA2170”, it should connect
automatically.
Note: On occasion it may request for a password before pairing.
Default password is “0000”.
4. If the pairing is successful, the Blue light on the headphones will stay on.
5. You can now playback music/tracks from your Smart Phone/Bluetooth®
Device. The controls on the headphones are now active. You can answer phone
calls, play/pause music and adjust volume etc.
1. Plug in the AUX cable into the headphones. This will disable Bluetooth® on the
headphones.
2. Plug in the other end of the AUX cable to your Smart Phone/Playback Device.
Supports Mobile phones/MP4/MP3/CD/PC etc.
3. Active Noise Cancelling can be activated while connected via AUX by toggling
the ANC Switch.

Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.electusdistribution.com.au
Made in China
SPECIFICATIONS:
Speaker: Φ40mm
Wireless Distance Range: 10m
Bluetooth Version: 5.1
Battery Capacity: 400mAh
Noise Canceling On Only: 12-15 hours
Bluetooth On Only: 12-15 hours
Bluetooth + Noise Canceling: 6-12 hours
Charging Time: 1.5 hours
Microphone: 2pcs (-42db±2db)
Noise-Cancellation: 20~22db
Frequency response: 20Hz-20KHz
Charging Input: 5V /1A, Micro USB