Digital Equipment DGT-IR-673B40 User manual
DGT-IR-673B40
Color Camera
IR Color Camera
Specification
Packing Li t
No
Name
Model
Number
2.
User Guide
DGT-IR-673B40
1
1.
IR Color Camera DGT-IR-673B40 1
Franchiser：
Note
:
::
:
Before providing power for the
camera, plea e read thi U er Guide in
detail!
Do not attempt to disassemble the camera.
If the camera can not wor , please contact
local franchiser or our company.
Model DGT-IR-673B40
Pick up Element 1/3" SONY EXview HAD CCD II
Effective Picture Element
(H×V) PAL 976(H)x582(V)
Horizontal Re olution 700 TV Line
0.001 Lux
0Lux (with IR LED ON)
S/N Ratio 52dB
Scanning Sy tem 2:1 interface
Synchronou Sy tem Internal, Negative sync.
Auto Electronic Shutter PAL: 1/50s~1/100,000s
Gama Characteri tic 0.45
IR Di tance
40 Meters (with
￠
5X42PCS Infrared LED)
IR Statu
Under 10Lux by CDS
IR Power On
CDS AUTO Control
Video Output 1Vpp, 75Ω
Auto Gain Control Auto
Power
/
//
/
Current DC12V(+/-10%)
/
750mA
Len 4-9mm Manual Zoom Lens
Dimen ion (mm) 260(W)x112(H)x85(D)mm
Weight (g) 1600
Storage Temperature -30~+60
℃
RH95% MAX
Operating Temperature -10~+45
℃
RH95% MAX
Minimum Illumination
INTRODUCTION
Congratulations on your purchase of this product.
This User Guide suits DGT-IR-673B40 series
product. We
adopt the latest SONY technical of sensor and driver. The
most attractive characteristics are small and easy hidden,
suits the elevator and corridor. In addition, it owns the
characters of high
definition and stability, strong anti-
jamming, rich and real color. Fixing and
using this model
are convenient too. It is very good for you to apply to your
CCTV system.
Please read this instruction manual carefully to
ensure proper use of the product.
CONNECTING
BRIEF OF PRODUCT
*
* *
*
Sen or
(
((
(
CCD
)
))
)
Adopt SONY 1/3
"
CCD Sensor.
*
* *
*
Auto Gain Control (AGC)
Built-in auto gain control (AGC)
circuit. The color camera
can get high definition picture in low Lux condition.
*
* *
*
Scanning Mode
PAL
mode.
*
* *
*
OSD SETTING
DC12V
Power Supply
Monitor
DGT-IR-673B40
TROUBLE AND SOLUTION
Lin wire rule
：
Power
Video
Note
:
: :
:
●
Please note the camera’s operating temperature and its using
environment
requirement. Avoid using the camera at too high or
too low temperatures. The operating temperature is -30~
+
60
℃
.
(Recommendatory operating temperature is -10~+45
℃
.)
●
Never ma e the camera face the sun or bright object.
Otherwise, it will damage the CCD
.
●
Do not mount the camera near by the radiator
or heater.
1. No Picture after providing power
. May be the power supply voltage abnormity, please chec the power
supply voltage and pole
whether exactitude
.
. Please chec all the connecting cable and monitors whether be connected
correctly or not
.
2. The picture level direction have flowing interference ripple
. May be caused by the power supply AC ripples, it need filter the wave of the
power supply
.
. Chec the monitor and peripheral equipments used.
3. The picture background color change continuou ly
. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
4. The picture mear too ma
. The power supply’s voltage unstable
.
. Connecting cables not connect correctly or have high impedance.
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure
that may be of sufficient Magnitude to
constitute
a ris of electric shoc to persons.
Video
DC12V
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
RISK OF ELECTRIC. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
Note
：
：：
：
●
The power supply
must through safe attestation. Its output voltage,
current, voltage polarity
and operating temperature
must match the
camera’s requirement
.
●
When using the camera in the thunderbolt condition
,
please note to
mount Anti-thunder device or put off the power supply plug and cable
.
●
In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
MENU
UP
DOWN
RIGHT
LEFT
PRESS
KEY BOARD
OSD SET
LENS
MANUAL
AUTO
TYPE:DC/VIDEO
MODE:CLOSE/AUTO/OPEN SPEED:0-255
SHUTTER/
AGC
AUTO
HIGH LUMINANCE MODE:SHUT+AUTO IRIS/AUTO
IRIS
BRIGHTNESS:0-255
LOW LUMINANCE MODE:OFF/AGC
BRIGHTNESS: ×0.25, ×0.5, ×0.75, ×1
MANUAL
MODE:SHUT+AGC
SHUTTER:1/50,1/120,1/250,1/500,1/1000,1/2000,
1/4000,1/10000
AGC:6,12,18,24,30,36,42,44.8
WHITE BAL
ATW SPEED/DELAY CNT/ATW FRAME/ENVIRONMENT
PUSH/ANTI CR/PUSH LOCK/USER1/USER2/MANUL
BACK LIGHT OFF/BLC/HLC
PICT
ADJUST MORROR/BRIGHTNESS/CONTRAST/SHARPNESS/HUE/GAIN
ATR
OFF
ON LUMINANCE/CONTRAST
MOTION
DET
OFF
ON DETECT SENCE/BLOCK DISP/MONITOR AREA/
AREA SEL/TOP/BOTTOM/LEFT/RIGHT
PRIVACY
OFF
ON AREA SEL/TOP/BOTTOM/ LEFT/RIGHT/
COLOR/TRANSP/MOSAIC
DAY/NIGHT
COLOR
B/W BURST:OFF/ON
AUTO
BURST:OFF/ON
DELAY CNT/DAY-NIGHT/NIGHT-DAY
NR NR MODE:Y/C,OFF,Y,C
CAMERA ID OFF/ON
SYNC INT
LANGUAGE
CAMERA RESET/BACK/EXIT/SAVE ALL
ENGLISH/CHINESS/JAPANESS/ESPANOL/PORTUGUES/
PYCCKNN/FRANCAIS/DEUISCH
