Digitus DN-10130-1 User manual

GIGABIT ETHERNET
PCI EXPRESS NETWORK CARD
Quick Installation Guide
DN-10130-1

2
Products Highlight
•Realtek RTL8111H Gigabit Ethernet Controller:
High performance and reliability; low power
•Data Rate Supported per Port:
10, 100 & 1,000 Mbps
•Bus Type: PCI Express X 1 (2.5 GT/s)
•Bus Width: x1 lane PCI Express operable
in x1, x4, x8, x16 slots
•Bus Speed (x1, encoded rate): 2.5 Gbps
uni-directional; 5 Gbps bi-directional
•Connectors: RJ-45*1
•IEEE Support: IEEE802.1p IEEE802.2
IEEE802.3ac, IEEE802.3az, IEEE802.3x
•LED Indicators: LINK/ACTIVITY

3
Specifications
Speed
1.25Gbps
Connector
RJ45
Ports
Single
Controller
Realtek RTL8111H
Slot Type
PCI Express X 1(2.5 GT/s)
Slot Height
Full height
Working temperature
0-55°C
Working humidity
0-85%
Storage temperature
-20-60°C
Store humidity
10-80%
Package content
•1 x Gigabit Ethernet PCI Express Network Card
•1 x Quick Installation Guide
•1 x Driver CD
•1 x Low profile bracket

4
System Requirements
•Windows 11/10/8.1/8/7, Windows Server
2008/2012, FreeBSD, Linux
•Available PCI Express x1slot
Hardware installation
1. Turn off the computer and unplug the power
cord
2. Remove the computer cover and the PCIe card
slot cover from the slot that matches your PCIe
card
3. Insert the PCIe card edge connector into the slot
and secure the bracket to the chassis
4. Replace the computer cover, then plug in the
power cord
5. Power on the computer
6. Connect the RJ-45 network cable

5
Install Drivers
Windows®Operating Systems
You must have administrative rights to the
operating system to install the drivers.
1. Insert the CD driver bound with Realtek network
driver into your CD-ROM drive.
2. Start the autorun located in the software
package, the autorun may automatically start
after you have extracted files
3. Click install Drivers and Software
4. Follow the instructions in the install wizard to
finish it

6
To Verify Windows® Driver
Installation
Click on the Device Manager tab in System
Properties, which you access from the Windows
Control Panel. If you use the DN-10130-1 network
card, you should see one “Realtek PCIe GBE Family
Controller”…installed under Network adapters
item.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of
the shipping content. If the Declaration of Conformity is missing, you can request it by
post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany