Digitus DA-20315 User manual

MICROPHONE ARM
WITH TABLE CLAMP
AND CABLE GUIDANCE
Quick Installation Guide
DA-20315

2
1. Introduction
The DIGITUS Microphone Arm is ideal for streaming,
podcasts as well as gaming. The arm has 3 rotating joints
with which you can configure the optimal position of the
microphone. The robust clamp or screw fastening
creates a solid connection with your working table and
ensures a perfect hold. Internal springs and integrated
cable channels with removable covers ensure optimal
cable management. The standard threads 5/8" and 3/8"
enable high compatibility with common microphone
mounts.
2. Package content
A
x 1
B
x 1
C
x 1
D
x 1

3
E
x 1
F
x 1
G
x 1 (3mm)
3. Mounting instruction
Clamp Mounting:
1.)

4
Grommet Mounting:

5
Desktop with existing Through-
Hole:

6
2.)
Stored energy hazard!
1. Firmly hold the two
halves of the spring
arm together and
have another person
cut off the cable tie
from around the
spring arm.
2. Slowly release the
pressure on the
spring arm and allow
to gradually stretch
to its full extansion.

7
3.)

8
4.)
5.)
Hold the Head Joint (C1)
and loosen the knob, adjust
the microphone to desired
position, then tighten the
knob.

9
6.)
Adjust the screw
clockwise when the
bracket arm can
not stand, but do
not screw
counterclockwise.

10
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity
is part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany