dipo INDUCTION BKP26-A User manual

Caution
BKP118-A/BKPW11-A
BKP26-A/BKP18-A/BKPW-A
BK118-A/BKW11-A
BK26-A/BK35-A/BKW-A
CK118-A/CK218-A
CK26-A/CK35-A/CK226-A/CK235-A/2CK235-A
TCK26-A/TCK35-A
Theory 4P
Cautions 5~9P
Specifications 10~16P
How to use 17~20P
Emergency Measures 21P
Installation 22P
Cookware for Induction 23P
Warranty Card 24P
User’s Manual
Read this manual,
before using the Range.

1. Use an individual 208-240 VOLT, 20 AMPERE electrical socket.(BKW-
A,BKPW-A,BKW11-A,BKPW11-A: 5 AMPERE)
2. DO NOT block the air-intake panel as blocking may overheat the unit.
3. Use pans 12cm (4.75”) or larger in diameter. Please refer to Page 23 for a
list of suitable and unsuitable pans.
4. DO NOT touch the hot surface of the ceramic plate. NOTE: The induction
range itself does not produce any heat during cooking,
however, the heat from the pan will leave the ceramic surface hot!
5. DO NOT heat empty pots or pans. Heating an empty pan could
automatically activate the overheating protection function and the unit will
shut off. An empty pan can become extremely hot very quickly and cause
injury.
6. Place the induction range on a horizontal surface and at least 4” away
from the wall and other objects for the proper ventilation.
7. DO NOT place any objects or tools in the air-intake panel. Doing so may
cause electrical shock.
8. To protect against electrical shock, DO NOT immerse the unit, the cord or
the plug in or near water or other liquids.
2
INSTRUCTIONS and SAFEGUARDS

9. Close supervision is necessary when the induction range is used or near
children.
10. DO NOT operate the induction range if it has been damaged in any
manner or if the unit malfunctions. Return the unit to the nearest authorized
service facility for examination or repair.
11. The use of any accessories not recommended by the manufacturer may
cause injuries.
12. Keep the power cord away from heat.
13. DO NOT place the induction range in, on or near open flames, electric
burners, or other high temperature surroundings.
14. DO NOT heat any sealed cans on the induction range. A heated can may
explode.
15. DO NOT move the induction range while cooking or when the pan is hot.
16. After the induction range has cooled down, unplug the cord and clean as
follows, CERAMIC PLATE: wipe with damp cloth or use a mild, non-abrasive
cleaning solution.
BODY: wipe the control panel with soft cloth or use a mild cleaner.
17. DO NOT use induction range for other than the intended use.
18. Unplug when not in use.
19. When storing, DO NOT place any objects on top of the induction range.
20. When using an induction range (smooth top range) for cooking, keep your
pacemaker 2 feet (approx. 60cm) from the heating areas.
SAVE THESE INSTRUCTIONS!!!
3

T H E O R Y
4
Theory of DIPO Induction
Induction Range
When the magnetic flux created
at the coil passes through the
bottom of the pot placed on the
top plate, eddy current is
generated around the flux.
This eddy current then is
transformed into heat by the
resistant element of the pan and
heats up the pan for cooking.
The features of Induction Range
◈Save -> save up to 70%, no waste heat
◈Clean -> spills don’t burn on. No combustion
products in the air.
◈Fast -> cooks faster
◈Safe -> safest cooking equipment

5
Warnings / Cautions
Warnings / Cautions
Contents
Warning
Caution
Indicates the possibility of severe injury or death .
Indicates the possibility of injury or damage to
the equipment.
S Y M B O L
Don’t touch! General
prohibition Important!
Be careful of
Electric shock!
Use of fire strictly
prohibited!

6
Warning
Warnings / Cautions
1. Use the specified NEMA outlet.
** If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
Don’t touch the power plug or
cable with wet hands.
*You could get an electric
shock.
Don't use a damaged power plug.
Warnings / Cautions
Don't bend or put strain on the
power cable.

7
Warnings / Cautions
Warnings / Cautions
Warning
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
Children should be supervised to
ensure that they do not play with
the appliance.
Don’t install or use near an
electric heater or a gas range.
Don’t use in a wet environment. Use on a flat surface
Be careful not to drop this appliance.
Don’t move this appliance while in
use.

Warning
8
Warnings / Cautions
Warnings / Cautions
Don’t spray water on the range.
*It can cause a fire or electric shock.
Don’t use sharp tools, when you
clean this appliance.
Metallic objects such as knives,
forks, spoons and lids should not
be placed on the hob surface since
they may get hot.
WARNING : If the ceramic surface is
cracked, switch off the appliance and
unplug the unit to avoid possibility
of electric shock.
Be careful that the power cable is not
damaged or put under strain.
Don't use paint thinner,
benzene or gasoline, when you
clean this appliance.
Don’t touch the hob surface, after
using range. It will be hot.

9
Warnings / Cautions
Warnings / Cautions
Warning
When not in use, unplug the unit.
Use vessels of the proper size.
*Use pans with a flat bottom and a diameter
between 5 and 12 inches.
Do not heat an empty pan or cook
dry ingredients.
Keep electronics and magnetic
cards away from the ceramic
surface.
If the oil starts smoking when oil
frying food, turn off the power!
If you use pacemaker, consult with
doctor before use this appliance.
12cm~24/30cm.
Do not block the exhaust vents.

10
SPECIFICATIONS
Specifications
Model
Watt
Voltage
Weight
Size
Heat Level
BKP26-A
2600W
9 Steps 8 Steps 7 Steps
MODEL: BKP26-A/BKP18-A/BKPW-A
9 lbs
AC 208 - 240V, 60Hz
14 5/8” x 11 ¾” x 3 ¼”
Warm( 1,2 ) Warm( 1,2 )
Ceramic Top
Plate
Display
Power
Touch
Button
Power
UP/Down
Button
Ventilation
BKP18-A BKPW-A
400W1800W

11
SPECIFICATIONS
MODEL: BKP118-A / BKPW11-A
Model
Watt
Voltage
Weight
Size
Heat Level
BKP118-A
AC 100 - 120V, 60Hz
9 lbs
14 5/8” x 11 ¾” x 3 ¼”
BKPW11-A
1800W 350W
9 Steps
(Warm : 1, 2) 7 Steps
Ceramic Top
Plate
Display
Power
Touch
Button
Control Button
Ventilation
Specifications

12
SPECIFICATIONS
Specifications
Model
Watt
Voltage
Weight
Size
Heat Level
BK118-A
1800W
10 Steps
MODEL: BK118-A / BKW11-A
9 lbs
AC 100 - 120V, 60Hz
14 5/8” x 11 ¾” x 3 ¼”
Warm( 7steps )
Ceramic
Top Plate
Display
Power
Button
Control Knob
Ventilation
Start Button
Mode
Button
Min,Sec
Button
Timer
Button
BKW11-A
7 Steps
350W

13
SPECIFICATIONS
Specifications
MODEL: BK26-A / BK35-A / BKW-A
Model
Watt
Voltage
Weight
Size
Heat Level
BK26-A
AC 208 - 240V, 60Hz
11 lbs
14 5/8” x 11 3/4” x 3 ¼”
Ceramic
Top Plate
Display
Power
Button
Control Knob
Start Button
Mode
Button
Min,Sec
Button
Timer
Button
BK35-A BKW-A
2600W 3500W 400W
10 Steps(Warm : 7 Steps) 7 Steps
Ventilation

14
SPECIFICATIONS
Model
Watt
Voltage
Weight
Size
Heat Level
CK118-A
1800W
15 lbs
18” x 14 ½” x
4 ½”
MODEL: CK118-A/CK26-A/CK35-A
AC 208-240V 60Hz
10 Steps(Warm : 7 Steps)
Ceramic Top
Plate
Power
Button
Start/Stop
Button
Power Up/Down
Buttons
Display
Air Filter
Ventilation
Specifications
CK26-A CK35-A
2600W 3500W
15 lbs 15 lbs
AC 100-
120V 60Hz
18” x 14 ½” x
4 ½”
18” x 14 ½” x
4 ½”

15
SPECIFICATIONS
Model
Watt
Voltage
Weight
Size
Heat Level
CK218-A
3600W
29 lbs
MODEL: CK218-A/CK226-A/CK235-A/2CK235-A
AC 208-240V 60Hz
10 Steps(Warm : 7 Steps)
27.5” x 17 ¾”
x 4 ½”
27.5” x 17 ¾”
x 4 ½”
27.5” x 17 ¾”
x 4 ½”
Ceramic Top
Plate
Power
Button
Start/Stop
Button
Power
UP/Down
Buttons
Display
Air Filter
Ventilation
Specifications
CK226-A CK235-A 2CK235-A
5200W 7000W 6100W
29 lbs 29 lbs 29 lbs
AC 100-120V
60Hz
27.5” x 17 ¾”
x 4 ½”

16
SPECIFICATIONS
Specifications
MODEL: TCK26-A / TCK35-A
Model
Watt
Voltage
Weight
Size
Heat Level
TCK26-A
2600W 3500W
19 lbs 19 lbs
AC 208-240V 60Hz
10 Steps (Warm : 7 Steps)
18” x 14 ½” x 4 ½”
Ceramic
Top Plate
Display
Power Button
Control
Knob
Ventilation
Start Button
Timer/Mode
Button Air Filter
TCK35-A

17
HOW TO USE
How To Use
BKP-A Series
Display Power Button
Start/Up Step
Down Step
1. Insert power plug.
2. Place a vessel on the Ceramic Top Plate.
One lighted dot on the display indicates that the unit is plugged in.
◆It must be placed in center of the ‘target’ on the Ceramic Top Plate.
3. Operation
◆If you press the power button, “0” is displayed.
◆If you want to start operation, press the Up Button. At first, "5" is displayed.
◆If you want to control Heat Level, press the Up or Down button. You can
control levels from 1 to 9 steps.
4. Heat Levels
Model Cook Warm
BKP26-A
BKP118-A
3 ~ 9 Steps Step 1 (95oF)
Step 2 (140oF)
BKP18-A 3 ~ 8 Steps Step 1(95oF)
Step 2 (140oF)
BKPW-A
BKPW11-A
X 1 (95oF) 2 (104oF)
3 (122oF) 4 (140oF)
5 (158oF) 6 (176oF)
7 (194oF)
5. To Turn the Unit Off
◆Press the Power Button to turn the unit off and reset.
◆Maximum run time is 12 hours. After 12 hours, press the Start/Up
Button to continue the cook cycle.
☞DIPO is not responsible for damage to the equipment or
injuries caused by mis-use or negligence.

18
HOW TO USE
How To Use
BK-A Series
Start Button Power
Button
Control Knob
Min/Sec
Button
Timer
Button
1. Insert power plug.
2. Place a vessel on the Ceramic Top Plate.
◆Four lighted dots on the display indicates that the unit is plugged in.
◆It must be placed in the center of the ‘target’ on the Ceramic Top Plate.
3. Operation
◆If you press the power button, “00” is displayed.
◆If you want to start heating, press the START Button and turn the knob to right. At
first, “01" is displayed.
◆If you want to control Heat Level, spin knob to right(Max.10 Step) or to left(Min.H1
step).
4. How to use Timer Function
◆Press the power button. “00” is displayed.
◆Press the Timer Button. At first, "720" is displayed.
◆Press the Min/Sec Button. "720" will blink. And then, if you spin the knob, you can control
cooking times.( From 59 Seconds to 720 Minutes )
◆If you want to adjust the seconds, (for times less than 100 minutes) Press the Min/Sec
Button one more time and the Seconds will blink. Use the knob to select the desired time.
◆If you press the Start Button, the unit will start. If you want to control the heat level, press
the Timer Button, then spin the knob.
◆At the end of the set time , the operation will stop. Then if you press the start button one
more time, the product will start again with the same set time and heat level. But if you press
the power button, the set values are reset to Power Level 1 and 720 minutes.
☞DIPO is not responsible for damage to the equipment or
injuries caused by mis-use or negligence.

19
HOW TO USE
How To Use
CK-A / 2CK-A Series
Start Button
1. Insert the power plug.
3. Operation
4. To Turn the Unit OFF
◆Press the Power Button to stop operation and reset the power level to
01
Buttons to
control Heat
Level
Display
Window
Power Button
◆Two lighted dots on the display indicates that the unit is plugged in.
2. Place a vessel on the Ceramic Top Plate.
◆It must be placed in the center of the Target on the Ceramic Top Plate.
◆Press the power button. “00” is displayed.
◆If you want to start operation, press the START/STOP Button. At first, “01" is
displayed.
◆If you want to control Heat Level, press the Up or Down button. You can
control levels from 1 to 10 steps.
Also, you can control warm levels below level 1 from H1 to H7 steps.
◆Press the Start/Stop Button to halt the current operation and retain the power level setting.
◆This unit will run for a maximum of 12 hours. After 12 hours, press the Start/Stop button
to resume heating at the previously set power level.
☞DIPO is not responsible for damage to the equipment or
injuries caused by mis-use or negligence.

20
HOW TO USE
How To Use
TCK-A Series
Start
Button Power
Button
Control Knob
Mode
Button
Min/Sec
Button
Timer
Button
1. Insert the power plug.
5. Temperature Mode
◆And then, press the Mode Button. "000F" is displayed.
◆Press the Start button. The display will show 100F Then, set the cooking temperature by
turning the knob.. The display will alternate between showing the actual temperature and
the set point.
◆When the set point is reached, the display will stop changing.
★If you press the Mode button and no temperature sensor is attached, the display will
flash E5
★The temperature sensor is optional and purchased separately.
◆Four lighted dots on the display indicates that the unit is plugged in.
2. Place a vessel on the Ceramic Top Plate.
◆It must be placed in center of the Target on the Ceramic Top Plate.
3. Operation
◆If you press the power button, “00” is displayed.
◆If you want to control Heat Level, spin knob to right(Max.10 Step) or to left(Min.H1
step).
◆If you want to start operation, Press the Start/Stop button and turn the knob to the
right. At first, “01" is displayed.
4. How to use Timer Function
◆Press the power button. “00” is displayed.
◆Press the Timer Button. At first, "720" is displayed.
◆Press the Min/Sec Button. "720" will blink. And then, if you spin the knob, you can control
the cooking times.( From 59 Seconds to 720 Minutes )
◆If you want to adjust the seconds, (for times less than 100 minutes) Press the Min/Sec
Button one more time and the Seconds will blink. Use the knob to select the desired time.
◆If you press the Start Button, the unit will start. If you want to control the heat level, press the
Timer Button, then spin the knob.
◆At the end of the set time, the operation will stop. Then if you press the start button one
more time, the unit will operate again with the same set time and heat level. But if you press
the power button, the set values are reset to Power Level 1 and 720 minutes.
◆Press the power button. “00” is displayed.
☞DIPO is not responsible for damage to the equipment or
injuries caused by mis-use or negligence.