dipo INDUCTION DIBK218S User manual

R&D Center: #209, Goraesan-ro, Wabu-eup, Namyangju-si, Gyeonggi-do, Republic of Korea 12202 / Tel : [phone] / Fax : [phone]
2 Hob Built-in Induction
DIBK218S
DIBK218S-A
DIBK218S-E
3400 W
DIBK218S
4000 W
Specification
200V, 50/60Hz, 1PH
Electricity
DIBK218S
DIBK218S-A
DIBK218S-E
DIBK218S-J
Power
Consumption
220V, 60Hz, 1PH
- Over heated product indication : "E4" ( IGBT heat sink temperature above 85℃ )
- Unstable power indication: "E7"
Product: 300 X 600 X 220 (mm) / 21kg
Package: 700 X 460 X 350 (mm) / 21.3kg
- Low voltage : "E3" ( Below 180V )
- Over voltage indication : "E2" ( Above 265V )
208~240V, 50/60Hz, 1PH
220~240V, 50/60Hz, 1PH
H6
H7
170Wh
Heating
1 ~ 8
(8 Steps)
Cookware Diameter
min : Ø110mm
max : Ø240mm
Loadable Weight
60Kg
Controller Type
Jog dial, Capactive button
(separated from the unit)
660 mm
Controller Cable
360 mm
Recommendation
Customized burner, Main kitchen
- Over current indication : "E1"
▣ Safety
- No vessel : "00"
Power Connection
Direct Conection
to Circuit Breaker
Output per
Warming Steps
H1
H2
H3
Max Current
40Wh
60Wh
100Wh
130Wh
Conversion to Calory
Warming
H1 ~ H7
(7 Steps)
3456 Kcal/h
17 A
350Wh
H5
Installation Guide
DIPO INDUCTION CO., Ltd. / www.dipoele.com
- Defective PCB indication : "E8"
Dimension / Weight
- Defective Working Coil indication : "E9"
Functions
&
Features
Warranty
240Wh
H4
DIBK218S-J
Power Cable
Electric Wiring
1 year (to be charged in case of user's negligence)
Seoul Office: #75, Achasan-ro 78-gil, Gwangjin-gu, Seoul, Republic of Korea 04969 / Tel : [phone] / Fax : [phone]
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
▶
Electricity : 220V 1PH
▶
Circuit breaker : 20A or above
▶
Cables : 400V, 6SQMM or above,
2 or 3 phase
▶Ground cable separated - 4SQMM or above

R&D Center: #209, Goraesan-ro, Wabu-eup, Namyangju-si, Gyeonggi-do, Republic of Korea 12202 / Tel : [phone] / Fax : [phone]
Seoul Office: #75, Achasan-ro 78-gil, Gwangjin-gu, Seoul, Republic of Korea 04969 / Tel : [phone] / Fax : [phone]
DIPO INDUCTION CO., Ltd. / www.dipoele.com
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
Control
Control Cut
Dimension (mm)
Product
Case Cut
※Tolerance
-
Width : 10mm / Length : 10mm

R&D Center: #209, Goraesan-ro, Wabu-eup, Namyangju-si, Gyeonggi-do, Republic of Korea 12202 / Tel : [phone] / Fax : [phone]
- Unstable power indication: "E7"
Recommendation
- Defective PCB indication : "E8"
- Defective Working Coil indication : "E9"
▣ Safety
- No vessel : "00"
- Over current indication : "E1"
- Over voltage indication : "E2" ( Above 265V )
- Low voltage : "E3" ( Below 180V )
- Over heated product indication : "E4" ( IGBT heat sink temperature above 85℃ )
Seoul Office: #75, Achasan-ro 78-gil, Gwangjin-gu, Seoul, Republic of Korea 04969 / Tel : [phone] / Fax : [phone]
DIPO INDUCTION CO., Ltd. / www.dipoele.com
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
▣ Timer Setting
Installation Guide
1 year (to be charged in case of user's negligence)
Electric Wiring
Specification
220V, 60Hz, 1PH
200V, 50/60Hz, 1PH
4800 W
Power Connection
Direct Conection
to Circuit Breaker
- Top glass overheated (empty vessel) : "E6" ( Top surface temperature above 260℃ )
Dimension / Weight
Controller Type
Product: 300 X 600 X 220 (mm) / 21kg
Package: 700 X 460 X 350 (mm) / 21.3kg
Jog dial, Capactive button
(separated from the unit)
Cookware Diameter
min : Ø130mm
max : Ø240mm
Loadable Weight
60Kg
Controller Cable
360 mm
660 mm
130Wh
170Wh
240Wh
350Wh
H5
Power Cable
Functions
&
Features
- Between 0sec - 720min (12hr)
2 Hob Built-in Induction
Electricity
DIBK226S
DIBK226S-A
DIBK226S-E
DIBK224S-J
Power
Consumption
DIBK226S
DIBK226S-A
DIBK226S-E
DIBK224S-J
220~240V, 50/60Hz, 1PH
5200 W
208~240V, 50/60Hz, 1PH
DIBK226S
Warranty
Warming
H1 ~ H7
(7 Steps)
Customized burner, Main kitchen
Heating
Output per
Warming Steps
H1
H2
H3
H4
H6
H7
40Wh
60Wh
100Wh
Max Current
24 A
Conversion to Calory
4492.8 Kcal/h
1 ~ 10
(10 Steps)
▶
Electricity : 220V 1PH
▶
Circuit breaker : 30A or above
▶
Cables : 400V, 6SQMM or above,
2 phase or 3 phase
▶Ground cable separated - 4SQMM or above

R&D Center: #209, Goraesan-ro, Wabu-eup, Namyangju-si, Gyeonggi-do, Republic of Korea 12202 / Tel : [phone] / Fax : [phone]
DIPO INDUCTION CO., Ltd. / www.dipoele.com
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
Control
Control Cut
Seoul Office: #75, Achasan-ro 78-gil, Gwangjin-gu, Seoul, Republic of Korea 04969 / Tel : [phone] / Fax : [phone]
Dimension (mm)
Product
Case Cut
※Tolerance
- Width : 10mm / Length : 10mm

R&D Center: #209, Goraesan-ro, Wabu-eup, Namyangju-si, Gyeonggi-do, Republic of Korea 12202 / Tel : [phone] / Fax : [phone]
- Top glass overheated (empty vessel) : "E6" ( Top surface temperature above 260℃ )
- Unstable power indication: "E7"
Recommendation
Dimension / Weight
Product: 300 X 600 X 220 (mm) / 21kg
Package: 700 X 460 X 350 (mm) / 21.3kg
Jog dial, Capactive button
(separated from the unit)
660 mm
Controller Cable
360 mm
- Over voltage indication : "E2" ( Above 265V )
- Low voltage : "E3" ( Below 180V )
- Over heated product indication : "E4" ( IGBT heat sink temperature above 85℃ )
Controller Type
Loadable Weight
Customized burner, Main kitchen
Seoul Office: #75, Achasan-ro 78-gil, Gwangjin-gu, Seoul, Republic of Korea 04969 / Tel : [phone] / Fax : [phone]
DIPO INDUCTION CO., Ltd. / www.dipoele.com
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
Cookware Diameter
(Front hob)
min : Ø130mm
max : Ø240mm
Cookware Diameter
(Back hob)
min : Ø125mm
max : Ø240mm
30kg each
Warranty
1 year (to be charged in case of user's negligence)
Installation Guide
Functions
&
Features
▣ Safety
- No vessel : "00"
- Over current indication : "E1"
- Defective PCB indication : "E8"
- Defective Working Coil indication : "E9"
▣ Timer Setting
- Between 0sec - 720min (12hr)
Conversion to Calory
5270.4 Kcal/h
Warming
H1 ~ H7
(7 Steps)
Heating
1 ~ 10
(10 Steps)
Output per
Warming Steps
H1
H2
H3
H4
H6
H7
40Wh
60Wh
100Wh
130Wh
170Wh
240Wh
350Wh
H5
208~240V, 50/60Hz, 1PH
220~240V, 50/60Hz, 1PH
Electricity
DIBK261S
DIBK261S-A
DIBK261S-E
DIBK254S-J
Max Current
27 A
Power
Consumption
DIBK261S
DIBK261S-A
DIBK261S-E
DIBK254S-J
6100 W
2 Hob Built-in Induction
Electric Wiring
Power Cable
DIBK261S
Specification
220V, 60Hz, 1PH
200V, 50/60Hz, 1PH
5400 W
Power Connection
Direct Conection
to Circuit Breaker
▶
Electricity : 220V 1PH
▶
Circuit breaker : 30A or above
▶
Cables : 400V, 6SQMM or above,
2 phase or 3 phase
▶Ground cable separated - 4SQMM or above

Seoul Office: #75, Achasan-ro 78-gil, Gwangjin-gu, Seoul, Republic of Korea 04969 / Tel : [phone] / Fax : [phone]
Dimension (mm)
Product
Case Cut
DIPO INDUCTION CO., Ltd. / www.dipoele.com
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
Control
Control Cut
R&D Center: #209, Goraesan-ro, Wabu-eup, Namyangju-si, Gyeonggi-do, Republic of Korea 12202 / Tel : [phone] / Fax : [phone]
※Tolerance
-
Width : 10mm / Length : 10mm

R&D Center: #209, Goraesan-ro, Wabu-eup, Namyangju-si, Gyeonggi-do, Republic of Korea 12202 / Tel : [phone] / Fax : [phone]
Recommendation
- Defective Working Coil indication : "E9"
▣ Timer Setting
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
Installation Guide
Seoul Office: #75, Achasan-ro 78-gil, Gwangjin-gu, Seoul, Republic of Korea 04969 / Tel : [phone] / Fax : [phone]
Warranty
1 year (to be charged in case of user's negligence)
Electric Wiring
DIPO INDUCTION CO., Ltd. / www.dipoele.com
- Between 0sec - 720min (12hr)
Functions
&
Features
▣ Safety
- No vessel : "00"
- Over current indication : "E1"
- Over voltage indication : "E2" ( Above 265V )
- Low voltage : "E3" ( Below 180V )
- Over heated product indication : "E4" ( IGBT heat sink temperature above 85℃ )
- Defective PCB indication : "E8"
- Top glass overheated (empty vessel) : "E6" ( Top surface temperature above 260℃ )
- Unstable power indication: "E7"
Dimension / Weight
Controller Type
Product: 300 X 600 X 220 (mm) / 21kg
Package: 700 X 460 X 350 (mm) / 21.3kg
Jog dial, Capactive button
(separated from the unit)
660 mm
Controller Cable
360 mm
Cookware Diameter
min : Ø125mm
max : Ø240mm
Loadable Weight
60Kg
2 Hob Built-in Induction
Power Cable
Warming
H1 ~ H7
(7 Steps)
Heating
1 ~ 10
(10 Steps)
Output per
Warming Steps
H1
H2
H3
H4
H6
DIBK235S
7000 W
6600 W
DIBK235S
DIBK235S-A
6000 W
DIBK230S-J
Power Connection
30 A
7000 W
7000 W
DIBK235S-E
H7
40Wh
60Wh
100Wh
130Wh
170Wh
240Wh
350Wh
208~240V, 50/60Hz, 1PH
220~240V, 50/60Hz, 1PH
220~240V, 60Hz, 1PH
Direct Conection
to Circuit Breaker
Max Current
DIBK235S-E
DIBK235S-CE1
DIBK230S-J
Power
Consumption
Customized burner, Main kitchen
Specification
220V, 60Hz, 1PH
DIBK235S-CE1
Electricity
DIBK235S
DIBK235S-A
200V, 50/60Hz, 1PH
H5
Conversion to Calory
6048 Kcal/h
▶
Electricity : 220V 1PH
▶
Circuit breaker : 40A or above
▶
Cables : 400V, 6SQMM or above,
2 phase or 3 phase
▶Ground cable separated - 4SQMM or above

DIPO INDUCTION CO., Ltd. / www.dipoele.com
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
Control
Control Cut
Seoul Office: #75, Achasan-ro 78-gil, Gwangjin-gu, Seoul, Republic of Korea 04969 / Tel : [phone] / Fax : [phone]
R&D Center: #209, Goraesan-ro, Wabu-eup, Namyangju-si, Gyeonggi-do, Republic of Korea 12202 / Tel : [phone] / Fax : [phone]
Dimension (mm)
Product
Case Cut
※Tolerance
- Width : 10mm / Length : 10mm