DiscountRamps TBSR-92 User manual

1
TBSR-92 TBSR-72 TBSR-60 instruction sheet
Assembly Recommended Tools:
Open Wrench
（1pcs)
Size=19mm

2
Assembly Diagram
Part List
Item# Description Quantity Item# Description Quantity
1 right longitudinal beam 1 4
M12x75
outer hexagonal
bolt full thread
6
2
left longitudinal beam
1 5
12 Spring washer
6
3
U-type mounting plate
66
12
large flat washer
6

3
STEP 1. Place the left and right longitudinal beams (1, 2) on the right side of the pickup bucket, as shown
in figure I, to see if drilling is needed, if you need to drill,confirm the drilling position first, remove the
left and right longitudinal beam (1, 2) .Drill the diameter of 13 hole with the hand electric drill,then
assemble right longitudinal beam(1),With the outer hexagonal bolt full thread (4)into the 12 Spring
washer (5), 12 large flat washer (6), the right longitudinal beam (1) on the U-type mounting plate (3) in
turn, all bolts tightened and fixed. The left longitudinal beam (1) is installed the same as the right one
as shown in Fig.1.
Fig.1

4
STEP 2. Assembly completed as shown in Fig.2.
Fig.2