SportRack SR2404B User manual

506-7277 1 of 5
4 BIKE HANGING HITCH RACK - SR2404B
WARNINGS / LIMITATIONS
• 4 Bike maximum carrying capacity
= 180 lbs./80Kg
• Check tightness off all bolts periodically.
• Check straps for wear and replace
periodically.
• Not intended for off-road use.
• Not intended for tandems or recumbents.
• Do not exceed weight per class of receiver;
class 1 = 2 bike, class 2 and up = 3 or 4
bikes (180lbs/80Kg max).
• Do not install on trailer or towed vehicle.
• Failure to use strap may result in loss
of bicycles.
Optional locking kits available: SR0022 • SR0901
1 1/4"
3,2 cm
2"
5,1 cm
Included

506-7277 2 of 5
1
2
Slide the hitch rack into trailer hitch receiver until hole in horizontal
tube aligns with receiver hole. Secure in position with receiver bolt,
as illustrated. Firmly tighten.
A
B
C
D
2"
5,1 cm
Tighten Well
Tighten Well
Receiver Installation
1/2"/ 13 mm
(not included)

506-7277 3 of 5
Tighten Well
4
5
1 1/4"
3,2 cm
3
A B
Tighten Well
1/2"/ 13 mm
(not included)

506-7277 4 of 5
MOUNTING BICYCLES ONTO YOUR HITCH-MOUNTED BICYCLE RACK
6
7
A B
• Place the bicycle(s) onto the hitch
support arms in the bicycle cradles.
• Make sure to cover the pedal closest
to the vehicle to help prevent it from
scratching the vehicle.
• Position or placement direction of the
bicycles will vary according to the type
of bicycle and size frame.
• Cradles can be either rotated or shifted
on bars to accommodate different bike
geometries.
• Alternate direction of bikes when loading.
• Load heaviest bike first onto inner
most cradles.
• Make sure the inner most cradle is
as far back as possible.
• Ensure straps tighten securely
around bike.
• Using load strap provided, secure
all bikes to main post.
Rear of Vehicle
Bicycle Installation

506-7277 5 of 5
8
Wrap strap around the last bicycle frame and the hitch rack arms (see illustration). We recommend using extra shock cord or rope on the bicycles to prevent the wheels
from turning and to prevent the frames from swaying into each other. Do not allow the bicycle tires to rest close to the exhaust pipe to prevent them from melting.
Check the bicycle(s) and hitch rack at regular intervals during use, more frequently on bumpy roads, and immediately if the bicycle(s) shift position.
9
Included
A B C
Tilting Instructions
Find out more about Bike Racks & Carriers we have.