Disney Starry Night Montana 057625-270 User manual

Starry Night Montana Change Centre
Model # 057625-270
© Disney, based on the “Winnie the Pooh” works by A.A. Milne and E.H. Shepard.
Visit the Disney website at www.disneybaby.com
� Padded removable change pad
� Easy to clean PVC
� Slide out baby bathtub
� Three tiered for ample storage
� Mesh bag for added convenience
Suitable for
up to
12 mths
14 kgs

Read all instructions before assembly and use of the change centre.
Keep instructions for future use.
Safety Precautions
This product has been manufactured for a child with a maximum age of 12 months or a maximum
weight of 14kgs.
Do not place more than 1kgs of goods in the mesh bag.
Be aware of the risk of open res and other sources of heat, such as electric bar res, gas res,
etc. in the near vicinity of the changing unit.
Use original accessories and manufacturer approved parts only.
Always ensure that the change pad locking tabs are locked in place when the change pad is raised
and not in use.
Do not use this change pad if any part is torn, broken or missing.
Ensure that the change centre is completely assembled and check that all parts are securely
tightened before use.
Regularly check all parts for tightness - tighten or replace if required.
Promptly replace worn or broken parts.
WARNING:
DO NOT LEAVE YOUR CHILD UNATTENDED.
AL BRAKES ON CASTORS / WHEELS MUST BE APPLIED
BEFORE PLACING YOUR CHILD ON THE CHANGE PAD OR
IN THE BATH.
DO NOT ALLOW OLDER CHIDREN TO CLIMB OR PLAY ON
THE CHANGE CENTRE
WARNING
Children have DROWNED while using bath aids.
This is NOT a safety device.
ALWAYS keep baby within arm’s reach.
NEVER leave baby in care of children. !!

3
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Change Centre
Congratulations on your purchase of the
Starry Night Montana Change Centre.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.

4
x2
x1
x1
x1
x1
x1
x3
x1
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
End panel
Side frame
With plastic brackets
Without plastic brackets
Supplied loose in box:
Change Pad
Bottom shelf
Bathtub
Storage containers
Side tray with towel rail (L+R)

5
x1
x2
x2
x1
x1
x2
x2
x2
x4
x1
x6
x4
x12
Mesh bag
Top frame long bars ‘A’ (80cm)
Top frame cross bars ‘B’ (39cm)
Bath frame
Bath frame cross bar ‘C’ (68cm)
Front frame long bar ‘D’ (76cm)
Front frame cross bar ‘E’ (52cm)
Plastic slider bracket
Castors
Drain tube
38mm Bolt
31mm Bolt (for top frame cross bars)
Assembly bolt
Assembly Contents

6
Assembly / Operating Instructions
Attaching side frames
1. Insert side frame into one side of
one end panel.
2. Insert two assembly bolts and
secure using plastic assembly
tool. Do not tighten completely.
Assembling front support frame
Attach front frame cross bars ‘E’ (52cm) to front frame long bars ‘D’
(76cm) using four 38mm bolts. Ensure that the closed ends on the
long bars are both oriented in the same direction, and that the small
holes on the long bars are oriented outwards as shown.
3. Insert second side frame into end
panel and secure with assembly
bolts using plastic assembly tool.
Do not tighten bolts completely.
4. Repeat to attach second end
panel.
1. 2.
3. 4.

7
Assembly / Operating Instructions
Assembling top frame
1. Place top frame long bars (80cm)
‘A’ into position and secure with
31mm bolts.
2. Attach top frame cross bars ‘B’
(39cm) to rearmost frame long bar.
3. Assemble plastic slider bracket to bath frame and bath frame
cross bar ‘C’ (68cm) as shown. Ensure bolt goes through
bracket and frame into cross bar. Also ensure that the frame is
on the same side of the change centre as the plastic clips on
the bottom of one side frame.
4. Slide slider bracket onto top frame
cross bars.
5. Attach top frame cross bars to
frontmost frame long bar.
6. Slide front support frame onto bath frame by pushing in lock
pins. Ensure lock pins are fully clicked into position.

8
Assembly / Operating Instructions
Assembling plastic components
1. Place the three storage containers into position on the upper
rails of the side frames, creating a shelf in the centre of the unit.
1.
2.
2. Place the left component of the side tray into position, then
place the right component ensuring it clips into the left
component as shown. Ensure the side tray rests against the bar
on the top frame.
7. Attach castors by pushing onto bottom of end panels
8. Tighten all twelve bolts.
Assembling top frame (cont)

9
3. Place bathtub into position as shown
4. Loosen top bolts on one end panel and place elastic loops of
bag around bolts.
5. Retighten bolts.
Assembly / Operating Instructions
To attach bottom shelf
1. Place bottom shelf in position as
shown. Ensure the cutouts in the
shelf align with the plstic clips on
the frame.
2. Fold up sides and attach end aps
around vertical bars of side panels,
using press studs to secure as
shown.
3. Attach aps underneath around
bottom rail of side bar using velcro
as shown.
Assembling plastic components (cont)

10
Assembly / Operating Instructions
To attach change pad
1. Place change pad into position, and clip to one side of top
frame.
2. Lower down and clip other side of change pad to top frame.
3. Attach drain hose to outlet on bathtub.
To access bath
To access bath, slide bath outwards.
When nshed, slide bath back inwards,
ensuring the bottom of the slide out
frame clips into the plastic clips as
shown.

11
How to care for your Change Centre
Cleaning
To ensure the long-lasting use of your change centre, wipe down with a damp cloth and use a
mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean
dry place.
Maintenance
Always check parts regularly for tightness of bolts, nuts and other fasteners – tighten or
replace if required. To maintain the safety of your change centre, seek prompt repairs for bent,
torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands.
If you have any difculties in assembling the change centre, please contact our Service
Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.

12
Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030
Customer Service 1300 667 137 www.cnpbrands.com.au
Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St,
Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000 [email protected]