Displays2go MSHWL Series User manual

User ManualUser Manual
MESHMESH
LITERATURELITERATURE
HOLDERHOLDER
SKUs: MSHWL SeriesSKUs: MSHWL Series

2
PARTS LIST
PART QUANTITY
A: Literature Holder...............................................................................................1
B: Drywall Screws.................................................................................................4
TOOLS REQUIRED:
Drill or Phillips Head Screwdriver
Level
NOTE: Size may vary depending on model purchased.
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.
Scan QR code
to visit product
page
1a. Measure and mark wall at desired location by using the illustration above or by holding unit
against the wall at desired height and marking wall through the screw holes.
18.11 in.
18.11 in.
7.08 in.
7.08 in.
36.22 in.
7.08 in.
7.08 in.
36.22 in.
MSHWL10SLV
MSHWL5SLV
NOTE: Use level to ensure that
unit is hung as desired.

3
Eny r wEny r w
lerur her!lerur her!
CONTACT INFORMATION:
www.displays2go.com
PHONE: [phone]
2. Carefully lift up literature holder
and then lower to hang on the
screws, as shown.
1b. Then, drill screws into the wall,
as shown. If using the diagram on
Page 2, use model that matches
your model’s size.