Displays2go LECTWFANAO User manual

LECTWFANAO
LECTWFANMB
LECTWFAWDO
AssemblyInstructions
(RequiresTwoPeople)

LecternParts:
1.ClearReading Top
2. WoodBase
3. WoodSide
4.(2)ClearFrontPanel
Hardware:
5.(4)LongFlatHeadScrews
6.(4)ShortFlatHeadScrews
7.PhilipsHeadScrewdriver(NotShown)
1.ClearReadingTop
2.WoodBase
3.WoodBodySides
5.LongFlatHeadScrews(4)
4. ClearFront Panel
6.ShortFlatHeadScrews(4)

Step#1:
Attaching the Base to the Bodysides
A) Alignthepre-drilledholesintheWoodBasewiththreaded
insertsinthe BodySides.
B) Usingthe provided screwdriver,attachthe Basetothe Wood
Sideswith(4)LongFlatHead ScrewsasillustratedinFigure2.
Tip:Donot fullytighen thesescrewsuntil is
inthisstep.
Figure2

Step#2:
AttachingtheClearFrontPaneltotheBodySides
A) Holdthe stand vertical asillustratedinFigure3after Step#1.
B) Softlyslide the Clear Front Panel intothe slotsof the bodysides
until the side slotsfullycover the edge of the Clear Front Panel.
C) Haveyour partner holdlecternforwardasshowninFigure5.
D) Tighten the (4) Long Flat Head Screwsthatwereinstalled inStep#1.
Figure3 Figure4
Figure5 Figure6

Step#3:
AttachingtheClearReadingToptotheBodySidesTop
A)PositiontheLecternonacleanflatsurface.
B)Alignthepre-drilledholesintheReading Top
withthethreadedinsertsintheBodySides.
C)Usingtheprovidedscrewdrivers,attachthe
ReadingToptotheBodySideswith
(4)ShortFlatHeadScrewsasillustratedinFigure7.
Figure7