Displays2go RD209O0SV User manual

Assembly
Instructions
ROUNDROUND
SILVER FLOORSILVER FLOOR
DISPLAY CASEDISPLAY CASE
SKU:SKU: RD209O0SVRD209O0SV
Scan the QR
code to visit the
product page.

PART QUANTITY
A: Back Panel ........................................................................................................................1
B: Door Panel ........................................................................................................................1
C: Side Panels .......................................................................................................................2
D: Adjustable Rods ...............................................................................................................4
E: Dust Seal ...........................................................................................................................4
F: Base ...................................................................................................................................1
G: Top ....................................................................................................................................1
H: Glass Shelves ...................................................................................................................4
I: Mirror Base ........................................................................................................................1
J: Screws ................................................................................................................................4
K: Door Hinge ......................................................................................................................1
L: Lock with Key.....................................................................................................................1
M: Allen Wrench...................................................................................................................1
A
F
J
B
G
K
C
H
L
D
I
M
E
Packing List

3
Fig. A
1. Identify the base and top and lay flat on the
floor. Add dust seals to each of the glass panels.
2. Assemble show case by inserting glass side
panels and back panel into base. Have at least
one person hold the panels steady while screwing
the adjustable rods into holes of base.
Fig. 1
Fig. 2
CAUTION: At least 2 people required for assembly!

4
Fig. B
Fig. C
3. Place top onto showcase, fitting the glass
panels into the top channel. Screw the
adjustable rods into the holes on the top.
(FIG.B)
4. Screw from the top to adjust the rods.
(FIG.C).
Fig. 3
Fig. 4

5
Fig. D
mirror
Fig. G
Fig. F
Fig. E
5. Adjust the shelf holders of the rods to the
desired height (FIG.D) and then add the
shelves. Add the mirrored shelf to the base.
6. Attach the hinge (FIG.E) and the lock (FIG.F)
to the door. Put the bottom hinge into the base’s
hole and insert the door into the upper hinge
(FIG.G) fixing it with proper screws. Two persons
are required for this final operation. Adjust the
door and then secure it.
Fig. 5
Fig. 6

6
CONTACT INFORMATION:
www.displays2go.com
PHONE: [phone]
SIDE SPOTLIGHT UPON REQUEST (art. 4/LT9)
Unfasten the screws, insert the spot light’s rod into the
proper hole and then fasten it.
At point 4 remember to insert the electric wire before
fixing the rod.
Assembly is
complete.