Dive System iDive User manual
1
APPs
User Manual
Ver: 1.3
2
The Applications can be installed on: iDive Easy, iDive Pro, iDive Tech, iDive Reb.
To install the applications on your iDive follow the instructions in this tutorial:
http://www.divesystem.com/idive/en/tutorial.htm
Press the top-right button to access the COMPASS screen.
Press again the top-right button to access the APPs menu
How to intall the Apps
Find the App menu
3
Press the right buttons to select the application.
Press the bottom-left button to select the application.
Press the bottom-left button to start the stopwatch.
Press again the bottom-left button to stop the stopwatch.
When the stopwatch is stopped Press the bottom-right button to reset.
When the stopwatch is running press the bottom right to memorise the laptime.
The iDive will shown the total laptime (LAP TIME) and the last laptime (LAST LAP).
To exit press the top-right button.
ATTENTION: If you do not stop the stopwatch it will continue to work even if you are
not seeing it. It can be useful if you need to use it for a long time, but it will
drain the battery faster then normal.
Select an App
Chrono
4
The MIX CHECK allows to analyser the % of Oxygen in
the air (The Gas Mix Analyser is sold separately)
Watch this tutorial to learn how to use the MIX CHECK
http://www.divesystem.com/idive/en/tutorial_
analyser.htm
Please refear to the user manual of the Gas Mix
Analyser (found in the package of the analyser) for
care and maintainance of the Gas Mix Analyser.
The iDive will show you the legenda of the lunar phases on the top of the screen.
(A white moon is FULL and a black moon is NEW).
At the center of the screen is displayed the current moon phase.
AGE : The number of days passed from the last NEW Moon.
EPT :“EPATTA”is the age of the moon at the 00:00 of the rst of january of the current
year. (used to calculate the Easter day and some other religious holidays.)
Pusch the top-right button to exit.
MIX CHECK
MOON (Lunar Phases)
5
The iDive has an integrated accelerometer used to automatically compensate the 3D
compass, it is used also for the PITCH&ROLL funcion (inclinometer).
The reference axis is shown in the top-right corner of the screen:
Horizontal axis
Vertical axis
The inclination is indicated from the central bar and form the graduated lines on the
sides of the screen.
Press the bottom-right button to change the reference axis.
Press the top-right button to exit.
PITCH&ROLL
6
The iDive can detect the electromagnetic elds.
The actual density of magnetic led detected is indicated in uT (microTesla)
The uT value in the bottom-left corner indicates the scale chart.
The value is automatically set to optimise the graph.
You can set the magmeter alarm by setting the bottom-right value of uT.
The iDive will activate the alarm if the actual uT is 5uT higher or 5uT lower the se-
lected uT value.
Press the bottom-right or bottom-left button to change uT ambient value.
Press the top-right button to exit.
You can use the Magmeter during your diving.
The magmeter works better underwater than in surface.
MAGMETER
7
The iDive has an integrated pedometer.
The iDive indicates:
Steps
distance
actual speed
burned calories
Press the bottom-right button to reset the pedometer.
Press the top-right button to exit.
Press the bottom-left button to set your Height and Weight.
Press the top-right or bottom-right button to set the value of Height and Weight.
You can also set the sensibility of the pedometer.
You can not use the Fitness during your diving.
FITNESS
8
DiveSystem is always developing new applications and improving his iDive.
New applications will be released in the future.
Periodically check the iDive website at www.divesystem.com/idive
or the DiveSystem Facebook page www.facebook.com/divesystem
User manual and Video-tutorial are available at:
http://www.divesystem.com/idive/en/support.htm
NEW APPs
9
© MMXV DiveSystem
Dive System
Via Vetturini 22/24 Valpiana - Massa Marittima (GR) Italy
www.divesystem.com
