RoboMaster Dart Trigger Device User Manual
2
©2020 DJI All Rights Reserved.
Disclaimer
Thank you for purchasing the ROBOMASTERTM Dart Trigger Device. Read this entire document and all safe
and lawful practices DJITM provided carefully before use. Failure to read and follow instructions and warnings
may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in
the vicinity. By using this product, you hereby signify that you have read this disclaimer carefully and that you
understand and agree to abide by all terms and conditions of this document and all relevant documents of
this product. You agree to use this product only for purposes that are proper. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no
liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its aliated companies.
Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their
respective owner companies.
This product and document are copyrighted by DJI with all rights reserved. No part of this product or document
shall be reproduced in any form without the prior written consent of or authorization from DJI. This document
and all other collateral documents are subject to change at the sole discretion of DJI. For up-to-date product
information, visit http://www.robomaster.com and click on the product page for this product.
Warning
1. Read and understand the whole user manual and strictly follow the instructions when using the device.
2. Make sure to use the product in strict accordance with the specications listed in this document, including
those related to voltage and temperature. Failure to do so may reduce the product service life or even lead
to permanent damage.
3. Secure the trigger device properly to avoid damage to the structure caused by improper force.
4. If you detect any ames, smoke, strange smells, or other abnormalities, disconnect the device from the
power source immediately.
5. DO NOT tear the TPU outer covering during use. Otherwise, the structure may be cracked and damaged.
Introduction
The RoboMaster Dart Trigger Device is an interactive device designed for the Dart System in the RoboMaster
competition. With the trigger device mounted to the tip of the dart, the RoboMaster Dart Detection Module can
receive and decode the infrared information emitted from the trigger device to judge the type of attack when
the trigger device hits the module. The trigger device will continuously glow red or blue when the dart is in ight
to distinguish which team the dart belongs to as well as to indicate the ight trajectory.
The trigger device adopts a hollow structure design, so that a camera of a compatible size can be installed
to improve accuracy with the help of visual algorithms. The TPU material of the outer covering provides an
eective buer to protect the camera and the internal structure of the dart when it hits the target.
