
•On/Off Switch: Engages the effect when ON, Switched bypass when OFF.
•INA jack: ¼” jack, instrument Input
•OUTA jack: ¼” jack Output to amplifier or next effect input
•Expression Input: ¼” Expression pedal input to control Rate
(recommended Yamaha FC-7, Roland EV-5, Boss )
•Internal IN GAIN Pot: Adjusts the input gain level of Input A
•9vdc input: 2.1mm jack, any polarity for worry free 9v to 12v pedal board supplies
(Input current is 30ma min at 9vdc)
•Internal charge pump: increases voltage for pure warm analog with head room
•Small, light aluminum enclosure: measures 3.7”W x 4.7”L x 1.7”H weight of 1.6lbs
•Powder coated paint (more durable than standard painting)
Settings (*some of many):
Thank you for making DLS Effects part of your art and sound!
*Uni-vibe™is a registered trademark of Dunlop Manufacturing, Inc.
www.dlseffects.com © 6/23
Input Gain Pot, clockwise
increases, (factory set: from full
CCW rotate 1/3 turn clockwise)
Warning (Please read for your protection).
Moisture & Water concerns:
This product should NOT be used near water or moisture. Care should be taken so that this product does not fall into liquids and liquids are not spilled onto
the enclosure. Do not use this product on a wet lawn, by a bathtub or sink, near a laundry basin, in a wet or damp basement, on wet cement, near a swimming
pool, etc).
Power:
If using a transformer, only use the transformer that is accompanied with the unit. If excessive heat or burning smell is discovered coming from this product or
the transformer, immediately unplug the transformer and the product and contact your dealer. Rout power supply cords so they are not likely to be walked on,
pinched, or damaged.
Hookup & Grounding:
Precautions should be taken so that the grounding and power of this or any product are not bypassed or altered. Improper hookup or grounding of this product
can cause injury or even death. If there is any question to proper installation and grounding, please contact a qualified electrician. For hookup information,
please consult with a qualified dealer or electrician.
Service:
To reduce the risk of fire or electric shock, the user should not attempt to service this product, open the enclosure, or alter the product or power transformer.
For any servicing requirements, please send this product and power supply to a qualified dealer.
General:
This product is heavy and should be handled with care to prevent injury. If there is any question or concern about this product or the hookup of this product,
contact a qualified electrician or qualified dealer.
DLS
Effects Inc.., web:ViVTrower Vibe, Vintage
ffects.com
Jimi Vibe with added vibrato pitch bend
Pitch bend Vibrato, Vintage
Magnatone Vibrato, Modern
Heavy bass Throb Repeater