DMD 7206.002 User manual

Tools Required for Assembly
Phillips Head Screwdriver
5/32" Hex Key (Supplied)
7/16" Wre ch
ITEM PART NO DESCRIPTION QTY.
1 7206.001-10 Sig Cha el 1
2 7206.001-11 Top Cap 1
3 7206.001-41-2 Metal Co ector -Fro t 1
4 7206.001-41-1 Metal Co ector - Back 3
5 7206.001-65R Btm Right Pa el 1
6 7206.001-66R Top Right Pa el 1
7 7206.001-67 Bottom Shelf Board 1
8 7206.001-40 Btm Shelf Bracket 4
9 DMD000182 Adhesive Glide Strip, 1 1/4" x 1/2" x
1/16" Thick, Off White 4
10 WL-RPH-8-916-B Washer Lath Screw, Rou d Head
Phillips Drive, #8 x 9/16", Black 8
11 7206.001-Dowel Pi Dowel Pi 6
12 CS-BHK-1420-1-B SCREW, CAP,BUTTON HEAD, HEX KEY
DRIVE, 1/4-20x1", Black 24
13 NU-NS-1420-B NUT, SERRATED FLANGE, 1/4-20, Black 30
14 CS-BHK-1420-12-B SCREW, CAP,BUTTON HEAD, HEX KEY
DRIVE, 1/4 X 1/2, BLACK 6
15 7206.001-66L Top Right Pa el 1
16 7206.001-65L Btm Left Pa el 1
17 HK-LA-532-R Wre ch: Hex Key, Lo g Arm, 5/32", Raw 1
18 7206.001-42-1 Top X-Brace 1
19 7206.001-42-2 Bottom X-Brace 2
Parts ist
Curve Display - Wood Tower
ASSEMB Y INSTRUCTIONS
1/17/17
DATE
Part - 7206.002
Page: 1 of 6
4
9
7
2
15
16
5
6
17
11
9
3
8
10
12
14
18
1
19
13
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263

ASSEMBLY INSTRUCTIONS
1/17/17
DATE
Part -7206.002
Curve D splay - Wood Tower
Page: 2 of 6
Washer, Lath Screw, Phillips
Top Brace, 7206.001-42-1
Part dentifier
Sign Channel, 7206.001-10
Top Cap, 7206.001-11
Back Metal Connector, 7206.001-41-1
7206.001-66L
Top Left Panel,
7206.001-66R
Top Right Panel,
7206.001-65L
Bottom Left Panel,
7206.001-65R
Bottom Right Panel,
7206.001-40
Bottom Shelf Bracket,
7206.001-Dowel Pin
Bottom Shelf Board, 7206.002-67
Dowel Pin,
HK-LA-532-R
Hex Key, 5/32" Long Arm
CS-BHK-1420-1-B
1/4-20 x 1 Button Head Screw,
CS-BHK-1420-12-B
1/4-20 x 1/2 Button Head Screw,
NU-NS-1420-B
1/4-20 Serrated Flange Nut -Black,
WL-RPH-8-916-B
Bottom X-Brace, 7206.001-42-2
Adhesive Glide Strip,
DMD000182
Back Metal Connector, 7206.001-41-2
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263

1/4-20 x 1/2"
Button Head Screw
Bottom View
7206.001-40
Bottom Shelf Bracket
Wa her Lath Screw
#8 x 9/16"
1/4-20 Serrated
Flange Nut
7206.001-41-1
Metal Connector-Back
Step 1 - A emble the Lower Half of the Di play.
-Attach Back Metal Connector to the Bottom Right and Left Panel
u ing 1/4-20 x 1" button head crew and 1/4-20 errated flange
nut a hown. Orient the lot Upward a hown.
-Attach Bottom Shelf Bracket to Bottom Shelf Board u ing #8 x 9/16"
wa her lath crew . Note: Bottom Shelf Board ha pre-drilled hole
on one ide to accept the lath crew .
-Attach Bottom Shelf Board and Bottom Shelf Bracket to the
Bottom Right and Left Panel u ing 1/4-20 x 1" button head crew
and 1/4-20 errated flange nut .
-Attach Front Metal Connector (No hole on face) to the Bottom Right and Left Panel
u ing 1/4-20 x 1" button head crew and 1/4-20 errated flange
nut a hown.
-Attach Bottom X-Brace to the Back Metal Connector u ing 1/4-20 x 1/2"
button head crew and 1/4-20 errated flange nut . Al o Connect X-Brace in center
where they inter ect with the ame fa tener .
Page: 3 of 6
DATE
Part - 7206.002
Curve Display - ood Tower
ASSEMBLY INSTRUCTIONS
1/17/17
Orient the slots upwards
as shown
Bottom Left Panel
7206.001-65L
Metal Connector-Back
7206.001-41-1
Metal Connector-Front
7206.001-41-2
Bottom Shelf Board
7206.001-67
Bottom Right Panel
7206.001-65R
7206.001-42-2,
Bottom X-Brace
Connector
on Front Metal
No Hole
Orient the slots upwards
as shown
7206.001-42-2,
Bottom X-Brace
1/4-20 x 1"
Button Head Screw
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263

Step 2 - Assemble the Top Half of the Display.
-Attach Back Metal Connector and Sign Channel to the Top
Right and eft Panels using 1/4-20 x 1" button head screws
and 1/4-20 serrated flange nuts as shown.
-Attach Top Cap to the tops of the Top Right and eft
Panels using #8 x 9/16" Washer ath Screws. Note: The top edges
of the Top Right and eft Panels have pre-drilled holes
to accept the lath screws.
ASSEMBLY INSTRUCTIONS
1/17/17
DATE
Part - 7206.002
Cur e Display - Wood Tower
Page: 4 of 6
7206.001-66R
Top Right Panel
Top Cap
7206.001-11
Sign Channel
7206.001-10
Top eft Panel
7206.001-66
7206.001-41-1
Metal Connector-Back
#8 x 9/16"
Washer ath Screw
Top Cap
7206.001-11
1/4-20 x 1"
Button Head Screw
Bottom View
1/4-20 Serrated
Flange Nut
Button Head Screw
1/4-20 x 1"
7206.001-41-1
Metal Connector-Back
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263

7206.001-42-1,
Top X-Brace
1/4-20 x 1/2"
Button Head Screw
7206.001-42-1,
Top X-Brace
Bottom X-Brace
7206.001-42-2,
1/4-20 x 1/2"
Button Head Screw
Step 3 - Connect t e Bottom Half to t e Top Half.
-Insert Dowel Pins into t e oles on t e Bottom
Rig t and Left Side Panels.
-Using two people, lift t e Top Half up over t e Bottom
Half and drop it into place so t at t e dowel pins fall into
t e oles on t e Top Rig t and Left Side Panels.
-Secure t e remaining oles on t e Back Metal Connector
to t e Top Half using 1/4-20 x 1" button ead screws
and 1/4-20 serrated flange nuts.
-Attac t e Top Brace to t e Metal Connectors using
1/4-20 x 1/2" button ead screws and serrated flange nuts.
ASSEMBLY INSTRUCTIONS
1/17/17
DATE
Part - 7206.002
C rve Display - Wood Tower
Page: 5 of 6
7206.001-Dowel Pin
7206.001-65R
Bottom Rig t Panel
1/4-20 x 1"
Button Head Screw
Flange Nut
1/4-20 Serrated
Flange Nut
1/4-20 Serrated
Flange Nut
1/4-20 Serrated
Button Head Screw
1/4-20 x 1"
Button Head Screw
1/4-20 x 1/2"
7206.001-41-1
Metal Connector-Back
Orient the slots pwards
as shown
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263

Step 4 - Install Graphics
Note: Graphics are not supplied with this kit.
-Install Sign into Sign Channel at the
top of the display.
-Display is now ready to load with shelves.
ASSEMBLY INSTRUCTIONS
1/17/17
DATE
Part - 7206.002
C rve Display - Wood Tower
Page: of
Sign
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263