Dodge Durango 2022 User manual

Dodge Durango
Q
S
G
U
T
U
I
A
I
C
R
D
K
T
E

Stop/Start OFF
Button
USB Port
(Behind Gear Selector)
Garage Door Opener
Hood Release
Parking Brake
On/Off Volume Paddle Shifters
Instrument Cluster
Display Control Buttons
Cruise Control
Buttons
VEHICLE OVERVIEW
Tune/Browse
Power Outlet
Wireless
Charging Pad

Push and hold the two outside HomeLink® buttons for 20 seconds until the
orange indicator ashes. An individual channel cannot be erased.
TO ERASE ALL SET CHANNELS:
Garage Door Opener
11
While the car is ON, hold the handheld garage door transmitter 1-3 inches
from the HomeLink®button you want to program in the vehicle.
22Push and hold both the HomeLink® button being programmed and the
button on the garage door transmitter.
NEED ASSISTANCE?
1-800-355-3515
55If the programming was successful, your garage door should
open and close with your chosen HomeLink®button.
44
For Rolling Code garage door openers only, rmly push and release
the “LEARN” or “TRAIN” button on your garage door opener
motor in your garage, then push the HomeLink®button in
your vehicle for two long presses.
33
For Non-Rolling Code garage door openers, watch for the indicator
light to go constant.
For Rolling Code garage door openers, watch for the indicator light
to go from a slow blink to blinking rapidly.
Scan For
HomeLink®
Video
LINK YOUR GARAGE DOOR
ROLLING OR NON-ROLLING?
Check your garage door opener motor in your garage for a
“LEARN” or “TRAIN” button by the hanging antenna. If you
have one of these, you have a Rolling Code garage door opener.
??

Pair a Phone
11
22
33
44
55
Make sure Bluetooth®is enabled on your
mobile device
With the vehicle in the ACC or ON/RUN
position, press the Phone button on
the vehicle’s touchscreen menu bar
Press “Pairing” or “Device Manager”
If equipped with the Uconnect 4, press
“Paired Phones and Audio Devices”
Select “Add Device” then follow the prompts
on your phone and on the touchscreen
CONNECT YOUR PHONE
Ready to remove a phone or audio device?
11Press “Paired Phones and Audio Devices”
or “Device Manager”.
22Press the Settings button next to the
phone or device you want to remove.
33Press “Delete Device”.
CONNECT YOUR APPS
KEEP IN MIND:
For AndroidTM Users, if the Android AutoTM app was not previously
downloaded, it will download the rst time you plug in your device.
For Apple®Users, Apple CarPlay®is only compatible with iPhone® 5
or later and requires Siri being enabled in “Settings”.
Connect your smartphone to the media USB port or pair your smartphone
within “Device Manager”.
The Android AutoTM or Apple CarPlay®icon will replace the phone icon on
the touchscreen.
44
On your phone's Bluetooth or Set Up menu,
remove the saved Uconnect radio.
Troubleshooting
11Perform a reset by holding the power
button on the radio for 15 seconds
22Reboot your phone 44Set up phone by following the
Pair a Phone steps above
33Remove the paired phone

Connected Services
WITH CONNECTED
SERVICES YOU CAN...
Lock Your Vehicle
Unlock Your Vehicle
Remote Start Your Vehicle
Cancel Remote Start
Activate Your Horn
ACTIVATE YOUR
REMOTE SERVICES
11Press “Apps” on the touchscreen.
22Press “Activate Services”.
33Press “Activate Now”.
44There are two ways to activate:
via email or via an agent. On the
next page, you can either enter
your name and email, or press
“Call An Agent” to directly
speak with a certied agent.
GET PERSONALIZED BY REGISTERINGREGISTER TO GET PERSONALIZED
**Requires an active SiriusXM Guardian™ subscription
Mopar®YOUR Way
CREATE YOUR OWNER'S PROFILE TODAY!
Get 24/7 Access To Everything You Need
Custom vehicle dashboard
Schedule dealer service with ease
View maintenance records**
Mobile vehicle commands**
Access to your vehicle's Owner's Information
Obtain special offers on Mopar®service
SET UP SERVICES & OWNER'S PROFILE
*Canadian residents
are not required to
create a prole, as
one is created when a
SiriusXM Guardian™
account is activated.
Registration
is simple.
Provide your
email address
to get started.
!!

Wireless Charging Pad
YOUR VEHICLE MAY
BE EQUIPPED WITH A
15W 3A QI WIRELESS
CHARGING PAD FOR
YOUR SMARTPHONE!
Scan For Wireless
Charging Pad Video
Your phone case may interfere
with wireless charging.
KEEP IN MIND:
OPERATE YOUR CHARGING PAD & WIPERS
Wiper Operation
HIGH
OFF
LOW
INT
ROTATE DOWN
TO MIST THE WINDSHIELD
PUSH & HOLD
TO ACTIVATE THE
WINDSHIELD WASHER
PULL
FOR FLASH-TO-PASS
PUSH
TO ACTIVATE HIGH BEAMS
Rear Wipers OFF
Rear Wipers ON
Front Wipers

Forward Collision Warning (FCW) With Mitigation
FCW with Mitigation can provide both audible and visual warnings, and may also apply a brake
jerk to warn you of a potential frontal collision. The warnings and limited braking are intended to
provide you with enough time to react, and avoid or mitigate the potential collision.
The system can be turned on or off by pressing
the Forward Collision button on your touchscreen.
You can also use your touchscreen to adjust the
system's sensitivity and active braking status.
Scan For
FCW Video
KEEP IN MIND:
The default settings are "Medium" and "Warning & Braking". This allows the
FCW system to warn the driver of a possible collision with the vehicle in
front using audible/visual warnings while applying autonomous braking.
Select between the following brake settings:
• Warning & Braking
• Warning Only
• Off
• Near
• Medium
• Far
Select between the following sensitivity settings: Press And Drag An Icon To Rearrange
Swipe Down To Customize Prole Options
• Media: Listen to the radio and play media.
• Home: Customize the Home screen with widgets.
• Phone: Pair your smartphone and make hands-free calls.
• Comfort: Adjust the vehicle's multiple climate systems.
• Vehicle: Change vehicle settings.
• Navigation: Search for and navigate to any destination.
Available Modes:
Uconnect 5 NAV - If Equipped
Scan For Voice
Recognition
Video
Scan For
Radio
Video
Push and hold the Power button on the radio's faceplate
for a minimum of 15 seconds to reset the radio.
KEEP IN MIND:
USE YOUR FCW AND RADIO SYSTEMS
Using Android Auto™Or Apple CarPlay®?
You can use Voice Recognition with Android Auto™and Apple CarPlay®!
22
Push and hold the Voice Recognition button to start a Voice session using
Android Auto™or Apple CarPlay®.
11
There may be an inconsistent volume between different audio sources.
Activate Android Auto™or Apple CarPlay®from Device Manager in Phone
Mode. The respective icon will replace the Phone icon in the menu bar.

ParkSense Sensors
Turn your ParkSense system on and
off by using the ParkSense switch.
The chime volume settings can
be programmed through your
touchscreen.
The ParkSense Park Assist system can provide visual and audible indications of the distance between the rear, and if
equipped, the front bumper and a detected obstacle when backing up or moving forward during a parking maneuver.
If the system detects an object, the vehicle brakes may automatically be applied and released.
The automatic braking function is intended to assist the driver avoid a possible collision
when obstacles are detected while in REVERSE gear.
KEEP IN MIND:
Rear ParkSense Sensors
If your vehicle is equipped with
front and rear ParkSense, you
will nd six sensors located on
both the front and rear bumpers.
If your vehicle is equipped with
rear ParkSense only, you will nd
four sensors on the rear bumper.
ParkSense Visual Warnings
The front sensors can detect obstacles
from 12 to 47 inches and the rear
sensors from 12 to 79 inches from
the bumpers.
KEEP IN MIND:
When the sensors detect an obstacle, a chime will
sound and the ParkSense Park Assist warning will
appear in the instrument cluster display. The system
will show arcs in the area of the obstacle based
on relative distance and location. As you approach
the obstacle, the arcs will move and the chime will
change from slow to fast to continuous.
USE YOUR PARKSENSE PARK ASSIST SYSTEM
Scan For
ParkSense Video

©2022 FCA US LLC. All Rights Reserved. Tous droits réservés. Dodge is a registered trademark of FCA US LLC or FCA Canada Inc., used under license. Dodge est une marque
déposée de FCA US LLC ou FCA Canada Inc., utilisée sous le permis. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.
Warning & Indicator Lights
For additional information on any of the topics in this publication, please refer to your Owner’s Manual.
Second Edition
WD_QSG_EN_USC_BA
AWD Low
Service AWD
Engine Check/
Malfunction Indicator
Oil Temperature
Electronic Throttle
Control (ETC)
Air Bag Battery Charge Brake Door Open
Engine Coolant
Temperature Liftgate OpenHood Open
Transmission
Temperature
Trailer Brake
Disconnected
Seat Belt Reminder
Electronic Stability
Control (ESC) Active
Cruise Control Fault
Anti-Lock Brake
System (ABS)
Front Fog Lights
Forward Collision
Warning (FCW) Off
Service Forward
Collision Warning (FCW)
LaneSense
High Beam
Sport Mode
Adaptive Cruise Control
(ACC) Set With Target
Tire Pressure Monitoring
System (TPMS)
Service Adaptive
Cruise Control (ACC)
Low Fuel
Turn Signal
LaneSense
Adaptive Cruise Control
(ACC) Ready
Service Stop/Start
LaneSense
Parking/Headlights On
Adaptive Cruise Control
(ACC) Set Without Target
Electric Power
Steering Fault
Oil Pressure
NEUTRAL
Vehicle Security
Electronic Stability
Control (ESC) OFF
Low Washer Fluid
Service LaneSense
Cruise Control Set
Stop/Start Active
ECO Mode
Tow Mode Track Mode
Sport Mode
Snow Mode
Custom Mode Valet Mode